• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    堿性電解液中K3[Fe(CN)6]在鋅陽極上的自發還原和吸附延長鋅鎳電池的循環壽命

    2022-11-24 11:16:42沈沅灝王擎宇劉杰鐘澄胡文彬
    物理化學學報 2022年11期
    關鍵詞:新加坡國立大學劉杰天津大學

    沈沅灝,王擎宇,劉杰,鐘澄,2,*,胡文彬,2

    1天津大學材料科學與工程學院,先進陶瓷與加工技術教育部重點實驗室,天津復合材料與功能材料化重點實驗室,天津 300072

    2天津大學-新加坡國立大學福州聯合學院,天津大學國際校區,福州 350207

    1 Introduction

    Due to the growing demand for energy in modern society,fossil fuel is unable to support the development of human society in the future1. Hence, it is essential to enhance the efficient utilization of renewable energy. In this case, cheap, reliable, and eco-friendly grid-scale energy storage system plays a key role in optimizing energy structure2–6. Although high-performance lithium-ion batteries are currently the most popular batteries,inflammability and limited resource still restrict their application in grid-scale energy storage7,8. Besides, considering the toxicity and weak performance of the lead-acid battery, aqueous Znbased batteries have captured widespread attention because of their unique advantages9–13. Excellent safety, environmental benignity, and low toxicity make aqueous Zn-based batteries competitive in large-scale energy storage system. Among various Zn-based batteries, with high open-circuit voltage and rate performance, Zn-Ni battery has great potential in practical applications14. However, although Zn-Ni battery has a history of more than 100 years, the intrinsic obstacles of Zn anode in alkaline electrolyte, such as dendrite, shape change, passivation,and corrosion, still prevent their implementation from commercialization15,16.

    To tackle the abovementioned challenges of Zn anode, many strategies have been applied, such as the introduction of additives, coating of active material, surface modification, and gel electrolyte17. Among these strategies, by virtue of excellent uniformity and feasibility, electrolyte additives have gathered tremendous interest and showed great potential in the practical application of Zn-Ni batteries18–22. According to composition,electrolyte additives can be divided into organics and inorganics.For inorganic additives, metallic compounds with high hydrogen evolution overpotential dissolved in the electrolyte, such as Bi2O3and In2O3, can be reduced and deposited as Bi and In on the anode during charging, which can inhibit the corrosion and enhance the conductivity of anode18–20. Some inorganic salts(e.g., KF and K2CO3) can reduce the solubility ofin alkaline electrolyte21,22. Moreover, Ca(OH)2can makebecome insoluble calcium zincate, and avoid the occurrence ofin the electrolyte23. With regard to organic additives,they are often used to inhibit dendrite and self-corrosion of Zn anode in alkaline electrolyte. For instance, vanillin has been used to suppress dendrite in alkaline electrolyte24. And the synergism of imidazole (IMZ) and polyethylene glycol (PEG) can inhibit the corrosion of Zn anode25. Besides, some additives (e.g.,polyethylenimine, cetyltrimethylammonium bromide, and sodium dodecyl sulfate) can adsorb on the anode, which can inhibit both dendrite and self-corrosion26,27. On the contrary,some studies also introduced ethanol and dimethyl sulfoxide as additives to improve the solubility of Zn species in the electrolyte, which can inhibit the passivation of Zn anode28,29.As viewed from the abovementioned studies, the directions of modification and functions of additives are quite different, which is induced by the lack of systematic study on the failure reason of Zn-based batteries.

    With regard to the primary failure reason of Zn-based batteries, many different opinions have been proposed in previous studies due to the differences in test conditions and battery systems30–33. To get a better insight of the failure reason of practical Zn-Ni battery, a systematic study was carried out by our group24. Based on the results of characterization and simulation, the failure reason of practical Zn-Ni battery is the shape change induced by Zn dissolution and uneven current distribution, which points out the direction for subsequent modification. In addition, corrosion of the Zn anode will accelerate capacity loss and passivation as well26,35.Accordingly, we focus our modification on inhibiting the corrosion and dissolution of Zn species.

    According to previous literature, K3[Fe(CN)6] can inhibit the corrosion of Zn metal in KOH solution26. Moreover, because of the strong binding of Fe3+and Fe2+with CN–, [Fe(CN)6]3?and[Fe(CN)6]4?are relatively stable in alkaline solution and have been used as redox pairs in alkaline redox-flow battery for many times37–39. In this study, K3[Fe(CN)6] is introduced to Zn-Ni battery as electrolyte additive to inhibit the shape change of Zn anode.

    2 Experimental

    2.1 Preparation of the electrolyte

    The pristine electrolyte used in Zn-Ni battery is ZnO-saturated 30% (mass fraction) KOH solution with LiOH additive. Besides,different mass fractions (0.25%, 0.5%, and 1%) of K3[Fe(CN)6]are introduced as electrolyte additive. After the addition of K3[Fe(CN)6], the electrolyte changes from colorless transparent to yellow transparent, which is the modified electrolyte. When there is no special emphasis, the mass fraction of K3[Fe(CN)6]in the modified electrolyte is 0.5%.

    2.2 Fabrication of Zn-Ni full battery

    The electrodes are manufactured according to the formula proposed by our group. The anode consists of ZnO, Zn, Al2O3,Bi2O3, polyvinyl alcohol, potassium polyacrylate,poly(tetrafluoroethylene) (PTFE), and Cu mesh (current collector). The cathode consists of CoOOH-coated Ni(OH)2, Zn,CoO, carboxymethyl cellulose, PTFE, and Ni foam (current collector). The functions of various components have been provided in detail in the previous study9,34. The abovementioned materials are provided by Hunan Yuanda New Materials Co.,Ltd. With regard to the pouch battery, to be closer to the situation of lean electrolyte in practical application, the mass ratio of electrodes and electrolyte is limited to ~3 : 1. And the specific assembly method is consistent with our previous study34.

    2.3 Characterization techniques

    Electrochemical Impedance Spectroscopy (EIS) of the fabricated batteries was obtained using an electrochemical workstation (CHI 660E, Shanghai Chenhua), with an initial potential of 1.2 V and a frequency range of 0.1 Hz to 1 × 105Hz.The surface morphology of the Zn plates and Zn anodes are investigated using optical microscopy (OM, VXH-2000C) and scanning electron microscopy (SEM, Hitachi S7800). The X-ray photo-electron spectroscopy (XPS, Axis Supra, Britain) test is applied to investigate the chemical composition. Besides, the phase of the reaction product and Zn anode is confirmed with X-ray diffraction (XRD, Bruker D8 Advanced). The composition of the reaction product between Zn and K3[Fe(CN)6] is measured by ICP-OES (Aglient 7800). To understand the difference in wettability between the two electrolytes, the dynamic contact angles on the Zn plate are tested on optical contact angle system(Dataphysics DCAT21).

    2.4 Electrochemical measurements

    Electrochemical impedance spectroscopy (EIS) and Tafel polarization curve are conducted on electrochemical workstation(CHI 660E, China) with three-electrode system, in which Zn plate, Pt plate, and Hg/HgO electrode are used as work electrode,counter electrode, and reference electrode, respectively. For EIS tests, the frequency range is 10 mHz to 100 kHz. Besides, the scanning range and scanning rate of Tafel tests were ±0.3 V (vs.open circuit potential) and 5 mV·s?1, respectively.

    For Zn-Ni full battery, all electrochemical tests are performed on the JINFAN battery test system (JFBTS, China). In the longterm cycle test, Zn-Ni batteries are measured at a 5 A discharge current with 50% depth of discharge (1.25 Ah). The batteries are charged with 2.5 A to 1.9 V and then with a constant voltage (1.9 V) to a certain capacity (1.275 Ah, charge an extra 2% to counteract side reactions). To acquire actual initial capacity, the batteries are discharged at 5 A to 1.2 V. Moreover, Zn-Ni batteries are also charged/discharged between 1.2 and 1.9 V to measure capacity retention and rate performance.

    3 Results and discussion

    To get a further insight of the effect of K3[Fe(CN)6] on Zn corrosion, Zn plates were soaked in the pristine electrolyte and modified electrolyte, respectively. As shown in Fig. 1a, Zn plates in the pristine electrolyte did not change significantly after immersion, while the surface of Zn plates in the modified electrolyte began to darken. Moreover, the modified electrolyte also changed from yellow transparent solution to colorless transparent solution. Obviously, K3[Fe(CN)6] was chemisorbed on the Zn plates and formed a dark surface. First, the surface morphology of soaked Zn plates was observed by SEM. As viewed in Fig. S1 (Supporting Information), the surface of pristine Zn plate is completely smooth with only a few scratches.After soaking in the pristine electrolyte for 1 day, the surface of Zn plate becomes uneven and a few holes appear. By comparison, no difference in morphology can be observed on the Zn plate soaked in the modified electrolyte. The morphology of the Zn plates soaked in the two electrolytes is almost the same at high magnification, while the Zn plates soaked in the modified electrolyte show more holes at low magnification. For this phenomenon, we speculate that it is relevant to the reaction between Zn and K3[Fe(CN)6]. And further experiments were carried out to explore the reaction mechanism and products between Zn and K3[Fe(CN)6].

    To explore the composition of the surface layer, XPS test was carried out on the soaked Zn plate after the residual electrolyte was completely washed (Fig. 1b–f). According to the survey spectra, compared with the Zn plate soaked in the pristine electrolyte, the signals of Fe and N were detected on the Zn plate soaked in the modified electrolyte. This result proved that Zn reacted with K3[Fe(CN)6] and formed trace amounts of new substance on the surface of Zn plate. Because SEM images and EDS did not detect any special morphology and elements, it can be inferred that the reaction product of chemisorption is only several atomic layers thick on the surface of Zn plate. To confirm the chemical component of the reaction product, the highresolution spectra of each element were analyzed.

    Fig. 1 Immersion test of Zn plates in the pristine electrolyte (marked as 1 in Fig. 1a) and modified electrolyte (marked as 2 in Fig. 1a). (a) The initial stage of immersion (top), and after immersing for 1 day (bottom). XPS spectra of the Zn plates after immersing in the electrolyte with and without K3[Fe(CN)6]: (b) comparison of survey spectra, (c) C 1s, (d) N 1s, and (e) Fe 2p high-resolution spectra of the Zn plate soaked in the modified electrolyte. (f) high-resolution spectrum of Zn plate soaked in the pristine electrolyte in the Fe 2p region. (g–i) High-resolution spectra of C, O, and Zn elements for Zn plate soaked in pristine electrolyte. (j–k) High-resolution spectrum of O and Zn elements for Zn plate soaked in modified electrolyte.

    First, the existence of C-N can be determined by the highresolution spectra of C 1s and N 1s40–42. The N 1s peaks at 397.9 and 399.3 eV demonstate that N exists in the cyanide ligand40,41.However, the Fe 2p signals are not entirely consistent with the conventional peak position of Fe 2p. As shown in Fig. 1e, there are four peaks in Fe 2p spectrum, located at 704.8, 708.6, 718.6,and 721.3 eV respectively. But the peaks at 704.8 and 718.6 eV can’t be well assigned to Fe 2p. According to the survey spectra,the spectrum of Zn plate soaked in the pristine electrolyte also appears slight fluctuation in this region. Therefore, through comparative analysis with literature, this pair of peaks with lower binding energy may be the interference brought by other elements43. As viewed from Fig. 1f, a pair of peaks also appeared in the Fe 2p spectrum of the Zn plate soaked in the pristine electrolyte, whose position and shape are similar to that of the Zn plate soaked in the modified electrolyte. It indicates that the pair of peaks at 704.8 and 718.6 eV in Fig. 1e don’t belong to Fe element. After removing the interference, according to the fitting results of Fe 2p in Fig. 1e, the Fe 2p peaks situated at 708.6 and 721.3 eV can be ascribed to Fe 2p1/2and Fe 2p3/2of K4[Fe(CN)6]41,44. However, the high-resolution spectrum of C 1s doesn’t show the signal of K element near 292 eV45,46.Therefore, there is no K element on the Zn plate, and the ferrocyanate interacts with Zn or forms a chemical bond.Besides, for comparison, the XPS spectra of O 1s and Zn 2p and all the corresponding XPS spectra for Zn soaked in the pristine electrolyte are provided in Fig. 1g–k.

    Although XPS spectra provide a great deal of information for determining reaction products, due to the low content of target products and elements, XPS test results can’t fully confirm product information. One possibility is that some of soluble products will be lost during the washing process of Zn plates.Therefore, Zn powder and modified electrolyte were used for magnification experiments. The Zn powder was poured into the modified electrolyte. And it was found that the color of the yellow transparent solution quickly lightened. After a short agitation, the solution became milky white suspension. Finally,the tiny white floccule precipitated to the bottom. The solution is almost colorless and transparent, indicating that the product is difficult to dissolve in the electrolyte. To analyze the product composition, after the Zn powder precipitated, the upper suspension was immediately poured into the centrifugal tube to centrifuge the floccule. As the floccule was soluble in water, the unwashed product was tested by XRD directly after drying. Fig.2a shows the XRD patterns of the centrifuged product. After comparison with the PDF standard card, the main components are K4[Fe(CN)6] (PDF#32-0801) and K2CO3(H2O)1.5(PDF#73-0470). Since the product is directly dried without washing, the residual KOH will be carbonated to K2CO3(H2O)1.5when it is dried in the air. It can be determined that Zn powder will reduce Fe3+in K3[Fe(CN)6] to Fe2+, and finally produce K4[Fe(CN)6]that is insoluble in alkaline electrolyte. In addition, the XRD patterns show that the diffraction peaks at 24.68° and 28.46° are stronger than those of standard PDF cards, which correspond to(250) and (260) crystal planes of K4[Fe(CN)6] lattice,respectively. The results show that K4[Fe(CN)6] grows preferentially on the two crystal planes. The structure of K4[Fe(CN)6] changes and finally precipitates as white floccule instead of light yellow transparent crystal (a common crystal form of K4[Fe(CN)6]).

    However, there are some differences between this product and XPS results. The characteristic peak of K element is not detected in the XPS spectrum, indicating that ferrocyanate doesn’t combine with K ion. Therefore, the Zn powder after reaction with K3[Fe(CN)6] was washed and measured by ICP-OES to confirm the composition of the reaction product on the Zn powder. As viewed in Fig. 2b, the results show that the mass ratio of Fe and K in the solution obtained by dissolving the Zn powder is 1.42. According to K4[Fe(CN)6] chemical formula, the theoretical mass ratio of Fe and K should be 0.36, much lower than the actual value. Hence, the reaction product on the surface of Zn powder is not only K4[Fe(CN)6] but also Zn2[Fe(CN)6] or other ferrocyanide. The experimental results show that the Zn powder will continue to reduce the remaining K3[Fe(CN)6] after forming a ferrocyanide layer on the surface. Nevertheless,because the outer reduction products can not directly contact Zn,K4[Fe(CN)6] will be formed and attached to the surface. The reaction mechanism and process are similar to a previous literature on the reduction of graphene oxide by Zn metal47. The reduction products on the surface won’t prevent the Zn from reducing the outer substances.

    The dynamic contact angle test in Fig. 2c and Fig. S2 reveals the effect of K3[Fe(CN)6] additive on the wettable properties of Zn plate. At the initial stage of contact, the contact angle between the modified electrolyte and Zn plate is almost the same as that of the pristine electrolyte, indicating that their wettability for Zn plate is very close. However, as time goes on, the contact angle between the modified electrolyte and Zn plate is gradually larger than that of the pristine electrolyte, which indicates that the wetting speed slows down. Combined with XPS and XRD results, it can be speculated that this is because the Zn gradually reacts with K3[Fe(CN)6] in alkaline electrolyte, forming a protective layer which can inhibit the contact between the electrolyte and Zn plate.

    Fig. 2 (a) XRD patterns of white floccule in the modified electrolyte after the reaction. (b) The mass ratio of Fe and K of Zn powder after reaction measured by ICP-OES. (c) Dynamic contact angle test of the pristine electrolyte and the modified electrolyte on the surface of Zn plates.

    Fig. 3 Electrochemical performance test of the pristine electrolyte and modified electrolyte. (a) EIS curves, (b) Tafel polarization curves.

    To further explore the effect of K3[Fe(CN)6] additive, the electrochemical performance of the modified electrolyte was tested in simplified three-electrode system. In Fig. 3a, the EIS curve displays a typical Nyquist plot that consists of a semicircle in high-frequency region and a diffusion line in low-frequency region. The semicircle is ascribed to charge transfer resistance(Rct), whose radius reflects the magnitude of Rct. Hence,K3[Fe(CN)6] additive significantly reduces the Rctcompared with the pristine electrolyte. Besides, EIS test is also conducted to measure the ionic conductivity. As shown in Fig. S3, the intercept between the EIS curve and Z’ axis is the internal resistance of the electrolyte. Hence, the internal resistances of the two electrolytes are similar, indicating similar ionic conductivity. Unlike conventional organic additives, as a salt with complex ion, K3[Fe(CN)6] not only doesn’t delay the kinetics of the reaction but promotes the reaction. Then, the influence of the modified electrolyte on Zn anode corrosion was studied by Tafel polarization curve test (Fig. 3b). The results show that compared with the pristine electrolyte system, the modified electrolyte has little influence on the corrosion potential of Zn anode, but reduces the corrosion current48,49.Based on the calculation of the formula shown in Fig. 3b, the addition of K3[Fe(CN)6] makes the inhibition efficiency reach 41.15%. According to the electrochemical tests, K3[Fe(CN)6] is expected to be an electrolyte additive that can simultaneously inhibit the dissolution of Zn species without affecting the electrochemical reaction rate. According to the experimental phenomenon and characterization results, the chemical composition of protective layer is ferrocyanide. And the most likely product is K4[Fe(CN)6]. The possible chemical equation is as follows:

    In general, the reduction of Rctindicates that Zn plate is more likely to react in this solution and has good reaction kinetics.Therefore, in theory, the corrosion rate of Zn plate should increase as well, which is not consistent with the results of Tafel test. By observing the Zn plates after test, it is found that the surface of the Zn plate tested in the pristine electrolyte is relatively dark, while the surface of the Zn plate tested in the modified electrolyte has many bright spots. Given this characteristic, the surface of Zn plate was further observed by optical microscope. As viewed in Fig. 4a, b, the surface of the Zn plate tested in the pristine electrolyte is severely corroded,with few areas of metallic luster remaining visible. However, the surface of the Zn plate tested in the modified electrolyte (Fig. 4c,d) still has many square areas with metallic luster, indicating that the corrosion of these areas is much weaker. Combined with the above mechanism investigation, the characteristic morphology is likely to be caused by the reaction product between the Zn surface and K3[Fe(CN)6]. In the Tafel polarization curve test,lower electrode potential may promote the reduction of K3[Fe(CN)6] on the Zn plate, and form a protective layer of ferrocyanide in part of the region with high activity, which inhibits the subsequent corrosion. To further study the surface morphology and composition, Zn plates were observed by SEM.As viewed from Fig. S4 and S5, the surface of the Zn plate tested in the modified electrolyte also shows many relatively flat square areas, in which only Zn element can be detected. This result shows that corrosion in these square areas is indeed inhibited.

    Fig. 4 Optical morphology of Zn plates after Tafel polarization curve test at different magnifications. (a, b) Zn plate tested in the pristine electrolyte, (c, d) Zn plate tested in the modified electrolyte.

    Fig. 5 Electrochemical performance of Zn-Ni batteries using the pristine electrolyte and the electrolyte with different mass fractions of K3[Fe(CN)6].(a) Cycling performance of the batteries discharged at 5 A, (b) discharge curve of the batteries discharged at 5 A,(c) capacity retention of the batteries discharged at 5 A, and (d) rate performance of the batteries.

    In addition to the electrochemical test based on the threeelectrode system, Zn-Ni full battery was assembled to further test the effect of K3[Fe(CN)6] additive on the performance of the battery. Fig. 5a shows the cycling performance of the batteries in the pristine electrolyte and the electrolyte with different mass fractions K3[Fe(CN)6]. The cut-off voltage of the Zn-Ni battery with pristine electrolyte is reduced to below 0.8 V after 124 cycles. The addition of K3[Fe(CN)6] significantly improves the cycling performance of Zn-Ni batteries. Before the cut-off voltage is lower than 0.8 V, the Zn-Ni battery with 0.25% K3[Fe(CN)6] cycled 269 times, and the Zn-Ni battery with 1% K3[Fe(CN)6] cycled 340 times. Surprisingly, after 423 cycles, the cut-off voltage of Zn-Ni battery with 0.5% K3[Fe(CN)6] is still above 1 V. Compared with the Zn-Ni battery with pristine electrolyte, the cycling life of the battery with 0.5% K3[Fe(CN)6]is improved by more than three times. Fig. 5b exhibits the discharge curves of Zn-Ni batteries in the pristine electrolyte and modified electrolyte when the discharge current is 5 A. At the initial stage of discharge, the voltage platform of the modified battery is slightly lower compared with the pristine battery.However, its discharge platform declines more slowly, and more capacity can be released eventually. According to subsequent characterization, because the anode cycling in the pristine electrolyte is loose, it is easier to contact the electrolyte at the beginning of discharge, which leads to a higher initial discharge platform. But as the discharge goes on, some Zn is surrounded by ZnO and unable to discharge (called “dead” Zn), which reduces the effective capacity and voltage of the battery. In the modified electrolyte, due to the compact structure, the anode discharges layer by layer without “dead” Zn. In this case, the battery with modified electrolyte exhibits a more stable discharge platform and releases more capacity. From the perspective of capacity retention (Fig. 5c), the battery with pristine electrolyte exhibits only 40% capacity retention after 85 cycles, while the battery with modified electrolyte shows 72% capacity retention. Moreover, the corresponding coulombic efficiency curve is provided in Fig. S6. According to the rate performance test of the battery (Fig. 5d), considering that the electrode is thick, the electrolyte is more difficult to enter the electrode and the diffusion polarization is larger. Therefore, the capacity is significantly reduced when discharging at high rate.At low rate, the specific capacities of Zn anode cycling in the pristine electrolyte and modified electrolyte are similar.However, at a high rate, the battery with modified electrolyte can release more capacity, indicating that the modified electrolyte reduces the battery polarization, and is more conducive to quick discharge. In addition, the GCD (galvanostatic chargedischarge) curves of Zn-Ni batteries using pristine and modified electrolyte under different cycle numbers and current densities are provided in Fig. 6.

    Fig. 6 The GCD curves of Zn-Ni batteries using pristine (Fig. 6a, c) and modified (Fig. 6b, d) electrolyte under(a, b) different cycle numbers and (c, d) current densities.

    To reveal the actual mechanism of K3[Fe(CN)6] additive in Zn-Ni battery, the Zn anode after the cycling was further analyzed. Fig. 7a shows an optical image of the anode after 125 cycles in the pristine and modified electrolyte. The Zn anode cycling in the modified electrolyte (on the right of Fig. 7a) is white, and there is no dark segregation layer. As viewed from Fig. 7b, XRD pattern of the anode cycling in modified electrolyte shows only the peaks of ZnO, but almost no peaks of Zn and Bi, which means there is no Zn and Bi near the surface.This result proves that the anode cycling in the modified electrolyte is free of “dead” Zn and segregation of additive.

    Moreover, we observed the morphology of Zn anode and conducted EDS analysis by SEM (Fig. 7c–h). The characteristic morphology of Zn anode surface is mainly divided into dark surface layer and white active material (Fig. 7c). The EDS results of the two characteristic areas indicate that the white region of the anode cycling in the pristine electrolyte contains only Zn and O elements, while the dark area also contains C, F, Bi, and Al elements. Consistent with the results in our previous study, in the pristine electrolyte, the electrode additive and binder of the Zn anode are segregated on the surface to form a dark surface layer,and the white active material is ZnO34. As for the anode cyclingin the modified electrolyte (Fig. 7f–h), its surface is almost white region. And the SEM image shows that the region is formed by ZnO spiny ball. EDS results also reveal that there are no other elements except Zn and O on the surface of this region. Hence,for the anode cycling in the modified electrolyte, there is no additive and binder segregation on the surface.

    Fig. 7 (a) Optical images of the anodes after 125 cycles in the pristine/modified electrolyte, and (b) XRD patterns of the anode after 125 cycles in the pristine/modified electrolyte. SEM images and EDS results of the anode after 125 cycles in the pristine/modified electrolyte.(c) Morphology of the anode cycling in the pristine electrolyte, (d) EDS results of white region 1 in Fig. 7c, (e) EDS results of dark region 2 in Fig. 7c, (f, g) morphology of Zn anode cycling in the modified electrolyte at different magnifications, and (h) the EDS result of Fig. 7f.

    Fig. 8 shows the cross-sectional images of Zn anode after 125 cycles in the pristine electrolyte and modified electrolyte,respectively. The anode in discharge state was first observed. As for the anode cycling in the pristine electrolyte (Fig. 8a–c), it has an uneven surface, relatively loose structure, and obvious shape change. Besides, a large amount of Zn metal (area with metallic luster) is surrounded by ZnO (gray area). Considering that the electron transport is limited, it can’t discharge and becomes“dead” Zn. In contrast, for the anode cycling in the modified electrolyte (Fig. 8d–f), the following two significant characteristics can be found: (1) the anode has a flat surface and relatively compact structure, without obvious shape change; (2)the discharge process of the anode is carried out layer by layer from outside to inside, which can be reflected by the clear interface between ZnO and Zn. The outer area of the anode has been completely transformed to gray ZnO, without “dead” Zn isolated by ZnO in Fig. 8a–c. To obtain more information about the mechanism of K3[Fe(CN)6], the cross section of the anode in charge state after 125 cycles is also analyzed. As viewed from Fig. 8g–i, for the anode cycling in the pristine electrolyte, due to serious shape change, the thickness of each region varies significantly. In addition, the Zn tends to aggregate and form larger Zn blocks or grains. This is unfavorable to ion transport when the outer layer of the Zn grain has discharged and turned into ZnO, which may be one of the reasons for “dead” Zn.However, for the anode cycling in the modified electrolyte (Fig.8j–l), it is obvious that most of the internal Zn is uniformly distributed in small particles. And there is no aggregation of Zn,which is in favor of ionic diffusion to the inner layer of Zn particles. According to previous literature, K4[Fe(CN)6] is often introduced into table salt as an anti-caking agent, which can effectively inhibit the aggregation and dissolution of NaCl at high humidity50–52. Therefore, the reasons for the uniform distribution of Zn particles in the anode can be speculated as follows: In the modified electrolyte, the growth of Zn particles in the anode is accompanied by the continuous accumulation of K4[Fe(CN)6] on its surface. The formation of K4[Fe(CN)6] layer not only prevents the contact among Zn particles, but also slows down the transport of Zn(OH)42?, which ultimately inhibits the aggregation growth of Zn. Moreover, it can also be observed from the cross section that the thickness of Zn anode cycling in the modified electrolyte is relatively uniform, without obvious shape change.

    Fig. 8 Optical cross-sectional images of different positions in the central region of the anode after 125 cycles (reaction side is facing up). Discharged Zn anode in (a–c) pristine electrolyte, and (d–f) modified electrolyte. Charged Zn anode in (g–i) pristine electrolyte, and (j–l) modified electrolyte.

    The XPS survey spectrum of Zn anode after 125 cycles (Fig.9a) shows that the anode in the pristine electrolyte can detect obvious signals of F and Bi elements. However, except for Zn,O, and C, no signals of other elements are detected on the anode cycling in the modified electrolyte. As viewed from the fitting results of the C 1s spectra (Fig. 9b, c), the peak at 292.2 eV is significantly higher than other peaks, which can be assigned to CF2of the binder in the anode53,54. These results indicate that the surface is composed of active materials (Zn and ZnO) rather than the segregation of binder and electrode additive. For Fig.9d, except for the interference peak brought by Zn, no signal of Fe can be detected. Combined with XRD results, the reduction product of K3[Fe(CN)6] is likely to exist as K4[Fe(CN)6] in the battery, which is insoluble in the electrolyte but soluble in water during washing process

    According to the above exploration, the mechanism of K3[Fe(CN)6] additive in Zn-Ni battery can be simplified as Fig.10. The dark background area is the mixture of active material in charge state, binder, and additive. And the light gray background area is the mixture of active material in the discharge state, binder, and additive. For the anode cycling in the pristine electrolyte, the Zn tends to aggregate and form larger blocks or grains, which is hard to entirely react during discharge. Besides,electrode additives and binder of the anode (e.g., Bi2O3and PTFE) segregate at the surface, which affects the uniform distribution of components and the performance of anode. For the anode cycling in the modified electrolyte, XPS test can roughly confirm that the K3[Fe(CN)6] exists and acts in the form of K4[Fe(CN)6] during the cycling. And there is no other insoluble ferrocyanide. However, according to the ICP test,K4[Fe(CN)6] is only slightly soluble in the pristine electrolyte(~0.2 g·L?1). Therefore, K4[Fe(CN)6] is likely to exist as flocculent precipitation and tiny amounts of [Fe(CN)6]4–after reduction on Zn anode. K4[Fe(CN)6] attached to the surface of Zn can effectively improve the affinity between Zn and other electrode additives, so that Zn anode does not occur segregation,and maintains uniform distribution. The uniform distribution of the electrode binder is beneficial to maintaining a compact structure of Zn anode, which makes the anode structure less susceptible to damage. And the uniform distribution of Bi2O3not only improves the conductivity of the anode but also makes the conductivity of each region relatively uniform. It is beneficial to decrease the resistance and balance the current distribution of Zn anode. K4[Fe(CN)6] attached to the surface of Zn can also regulate the transfer of Zn(OH)42?, and inhibit the continuous aggregation of Zn, which keeps Zn particles relatively uniform and small. Moreover, K4[Fe(CN)6] can inhibit the contact between the electrolyte and Zn anode, reducing the corrosion and dissolution. During the discharging process, because the structure of the anode cycling in the modified electrolyte is uniform, OH–is transmitted layer by layer. And it is difficult for the inner active material to preferentially obtain OH?for reaction. Therefore, the anode cycling in the modified electrolyte shows the characteristic of layer-by-layer discharge without“dead” Zn. And the utilization rate of the active material has been greatly improved.

    Fig. 9 XPS spectra of the anodes cycling in the pristine electrolyte and the modified electrolyte. (a) Comparison of survey spectra,(b) the C 1s high-resolution XPS spectrum of the anode cycling in the pristine electrolyte, and (c, d) high-resolution XPS spectra of the anode cycling in the modified electrolyte in the (c) C 1s and (d) Fe 2p region.

    Fig. 10 Mechanism diagram of K3[Fe(CN)6] electrolyte additive in Zn-Ni battery.

    4 Conclusions

    In this study, to overcome the shape change of Zn anode,K3[Fe(CN)6] is applied as electrolyte additive of Zn-Ni batteries.Furthermore, through rational experimental design and characterization, the reaction mechanism of Zn and K3[Fe(CN)6]is explored. According to XRD and XPS tests, we reveal that Zn metal can react with K3[Fe(CN)6] in aqueous KOH solution, and reduce [Fe(CN)6]3–to [Fe(CN)6]4–. The Zn-Ni batteries with K3[Fe(CN)6] additive exhibit a much longer cycling life, which can realize a cycling life three times longer than the battery without K3[Fe(CN)6]. Under the same number of cycles, Zn anode cycling in the modified electrolyte not only shows smaller shape change but also no “dead” Zn and segregation of electrode additives and binder. Besides, unlike conventional organic additives which increase the electrode polarization, K3[Fe(CN)6]can also improve the discharge capacity and rate performance of Zn-Ni batteries. Hence, by virtue of excellent feasibility and low cost, as an electrolyte additive with almost no negative effect,K3[Fe(CN)6] shows tremendous potential in promoting the commercialization of Zn-Ni batteries.

    Supporting Information:available free of charge via the internet at http://www.whxb.pku.edu.cn.

    猜你喜歡
    新加坡國立大學劉杰天津大學
    Effects of irradiation on superconducting properties of small-grained MgB2 thin films
    《天津大學學報(社會科學版)》簡介
    新加坡國立大學推出新型止血敷料
    新加坡國立大學助力重慶企業研發區塊鏈技術
    追光花園
    李梅梅、劉杰作品
    學生寫話
    DIGITIZING THE OROQEN
    DIGITIZING THE OROQEN
    漢語世界(2017年5期)2017-09-21 07:44:39
    新加坡國立大學卓越辦學經驗及啟示
    大學(2016年4期)2016-04-09 06:39:22
    国产免费视频播放在线视频 | 搡老妇女老女人老熟妇| 在线播放无遮挡| 一本一本综合久久| 麻豆国产97在线/欧美| 最近视频中文字幕2019在线8| 国产一区二区三区av在线| 国产精品国产高清国产av| 天堂中文最新版在线下载 | 国产精品不卡视频一区二区| 日本免费在线观看一区| 午夜福利在线在线| 又粗又硬又长又爽又黄的视频| 一夜夜www| 水蜜桃什么品种好| 直男gayav资源| 国产精品野战在线观看| 免费无遮挡裸体视频| 欧美一区二区精品小视频在线| 亚洲av成人精品一二三区| 91精品一卡2卡3卡4卡| 日韩国内少妇激情av| 22中文网久久字幕| 国产精品国产三级国产av玫瑰| 免费看美女性在线毛片视频| 午夜福利在线观看吧| 干丝袜人妻中文字幕| 亚洲精品影视一区二区三区av| 欧美成人a在线观看| 国产又黄又爽又无遮挡在线| 亚洲人成网站在线播| 午夜福利成人在线免费观看| 蜜桃亚洲精品一区二区三区| 热99re8久久精品国产| 精品久久久久久久末码| 亚洲国产精品成人综合色| 在线免费观看的www视频| 欧美日本亚洲视频在线播放| 日本黄大片高清| 成人一区二区视频在线观看| 精品欧美国产一区二区三| 少妇被粗大猛烈的视频| 久久久久久久久久久免费av| 国产中年淑女户外野战色| 一级毛片aaaaaa免费看小| 亚洲va在线va天堂va国产| 婷婷色综合大香蕉| 波多野结衣巨乳人妻| 六月丁香七月| 免费大片18禁| 天美传媒精品一区二区| 亚洲国产精品专区欧美| 一级黄色大片毛片| 啦啦啦韩国在线观看视频| 在线免费观看不下载黄p国产| 国产av不卡久久| 黄色日韩在线| 看片在线看免费视频| 国产久久久一区二区三区| 男人和女人高潮做爰伦理| 免费看美女性在线毛片视频| av国产免费在线观看| 91精品一卡2卡3卡4卡| 日本黄色片子视频| 精华霜和精华液先用哪个| 国产免费男女视频| 中文字幕制服av| 亚洲人与动物交配视频| 日韩高清综合在线| 亚洲av熟女| 成人特级av手机在线观看| 五月伊人婷婷丁香| 亚洲av中文av极速乱| 黄色一级大片看看| 午夜日本视频在线| 综合色丁香网| 成年av动漫网址| 伊人久久精品亚洲午夜| 久久精品久久久久久噜噜老黄 | 国产精品野战在线观看| 国产av在哪里看| 亚洲精品aⅴ在线观看| 色噜噜av男人的天堂激情| 三级经典国产精品| 最近中文字幕2019免费版| 我的老师免费观看完整版| 日韩一本色道免费dvd| 亚洲精品日韩av片在线观看| 三级男女做爰猛烈吃奶摸视频| 国产精品1区2区在线观看.| 人妻制服诱惑在线中文字幕| 午夜福利在线观看免费完整高清在| 99视频精品全部免费 在线| 日本-黄色视频高清免费观看| 人妻夜夜爽99麻豆av| 男人舔奶头视频| 97人妻精品一区二区三区麻豆| 亚洲美女视频黄频| 高清日韩中文字幕在线| 国产私拍福利视频在线观看| 美女黄网站色视频| 亚洲欧美精品自产自拍| a级毛片免费高清观看在线播放| 成人毛片a级毛片在线播放| 亚洲在线观看片| 小蜜桃在线观看免费完整版高清| 亚洲精品乱码久久久久久按摩| 99在线人妻在线中文字幕| 亚洲av免费高清在线观看| 中文字幕人妻熟人妻熟丝袜美| 国产黄片美女视频| 一本—道久久a久久精品蜜桃钙片 精品乱码久久久久久99久播 | h日本视频在线播放| 91av网一区二区| 久久综合国产亚洲精品| 成年免费大片在线观看| 亚洲欧美日韩东京热| 中文欧美无线码| 欧美性猛交╳xxx乱大交人| 亚洲欧美日韩高清专用| 国产免费又黄又爽又色| 国产精品久久久久久久电影| 欧美精品国产亚洲| 青春草国产在线视频| 国产伦理片在线播放av一区| 久久这里只有精品中国| 日韩亚洲欧美综合| 99久久精品一区二区三区| 国产高潮美女av| 国产国拍精品亚洲av在线观看| 99久国产av精品国产电影| 成人一区二区视频在线观看| 亚洲成人中文字幕在线播放| 性色avwww在线观看| 国产在视频线在精品| av.在线天堂| 国产精品一区二区三区四区久久| 成人av在线播放网站| 赤兔流量卡办理| 亚洲精品久久久久久婷婷小说 | 又黄又爽又刺激的免费视频.| 寂寞人妻少妇视频99o| 国产成人精品婷婷| 乱系列少妇在线播放| 日日摸夜夜添夜夜添av毛片| 91av网一区二区| 99久久无色码亚洲精品果冻| 十八禁国产超污无遮挡网站| 日本五十路高清| 日本爱情动作片www.在线观看| 内地一区二区视频在线| 精品一区二区三区人妻视频| 综合色av麻豆| 免费黄网站久久成人精品| 小说图片视频综合网站| 麻豆国产97在线/欧美| 成年免费大片在线观看| 免费av不卡在线播放| 在线免费观看的www视频| 国产中年淑女户外野战色| 国产激情偷乱视频一区二区| av播播在线观看一区| 日韩强制内射视频| 国产av一区在线观看免费| 国产av码专区亚洲av| 欧美日韩精品成人综合77777| 国产一区亚洲一区在线观看| 国产伦一二天堂av在线观看| 久久人妻av系列| 日韩成人伦理影院| 网址你懂的国产日韩在线| 欧美又色又爽又黄视频| 亚洲av免费在线观看| 欧美精品国产亚洲| 性色avwww在线观看| 少妇人妻精品综合一区二区| 免费看日本二区| 美女被艹到高潮喷水动态| 熟女电影av网| 欧美精品一区二区大全| 热99在线观看视频| АⅤ资源中文在线天堂| 18禁在线无遮挡免费观看视频| 日本黄色片子视频| 啦啦啦韩国在线观看视频| 网址你懂的国产日韩在线| 91午夜精品亚洲一区二区三区| 国产亚洲91精品色在线| 成人无遮挡网站| 亚洲精品456在线播放app| 麻豆一二三区av精品| 国产老妇女一区| 亚洲乱码一区二区免费版| 日韩大片免费观看网站 | 国产精品福利在线免费观看| 99久久精品热视频| 久久久久久久午夜电影| 深爱激情五月婷婷| 日韩高清综合在线| 国产亚洲av片在线观看秒播厂 | 成人美女网站在线观看视频| 国产又色又爽无遮挡免| 免费观看在线日韩| 亚洲精品亚洲一区二区| 三级男女做爰猛烈吃奶摸视频| 草草在线视频免费看| 日韩高清综合在线| 十八禁国产超污无遮挡网站| 日本-黄色视频高清免费观看| 亚洲一级一片aⅴ在线观看| 国产精品嫩草影院av在线观看| 99久久成人亚洲精品观看| 欧美三级亚洲精品| 亚洲熟妇中文字幕五十中出| 大香蕉97超碰在线| 美女高潮的动态| 波多野结衣巨乳人妻| 午夜福利高清视频| 国产成人精品婷婷| 好男人在线观看高清免费视频| 成人二区视频| 国产探花极品一区二区| 1000部很黄的大片| 两个人的视频大全免费| 搡女人真爽免费视频火全软件| 天堂√8在线中文| 18禁裸乳无遮挡免费网站照片| 国产 一区 欧美 日韩| 国产毛片a区久久久久| 久久精品人妻少妇| 亚洲av.av天堂| 午夜免费激情av| 欧美成人免费av一区二区三区| 日日摸夜夜添夜夜添av毛片| 国产极品天堂在线| 男女国产视频网站| 91久久精品国产一区二区成人| 男人和女人高潮做爰伦理| 成人鲁丝片一二三区免费| 中文字幕av在线有码专区| 波野结衣二区三区在线| 亚洲成人精品中文字幕电影| 亚洲精品国产成人久久av| 51国产日韩欧美| 成人欧美大片| 国产免费福利视频在线观看| 日韩三级伦理在线观看| 毛片女人毛片| 大又大粗又爽又黄少妇毛片口| 色综合色国产| 精品久久久久久电影网 | 五月玫瑰六月丁香| or卡值多少钱| 亚洲成人久久爱视频| 久久99热6这里只有精品| 中国美白少妇内射xxxbb| 亚洲欧美精品自产自拍| 美女国产视频在线观看| 成人午夜高清在线视频| 天天躁日日操中文字幕| 简卡轻食公司| 简卡轻食公司| 国产伦一二天堂av在线观看| av播播在线观看一区| 最近中文字幕高清免费大全6| 极品教师在线视频| 在线播放无遮挡| 亚洲自拍偷在线| 久久久精品94久久精品| 最后的刺客免费高清国语| 又爽又黄a免费视频| av在线蜜桃| 99久久中文字幕三级久久日本| 国产亚洲精品久久久com| 久久这里有精品视频免费| 国产熟女欧美一区二区| h日本视频在线播放| 看非洲黑人一级黄片| 卡戴珊不雅视频在线播放| 色视频www国产| 又爽又黄无遮挡网站| av天堂中文字幕网| 我的老师免费观看完整版| 久久久久久久久久黄片| av播播在线观看一区| 久久精品国产自在天天线| 色综合亚洲欧美另类图片| 麻豆国产97在线/欧美| 亚洲国产色片| 直男gayav资源| 国产免费男女视频| 蜜臀久久99精品久久宅男| 哪个播放器可以免费观看大片| 国产成人免费观看mmmm| av国产久精品久网站免费入址| 观看免费一级毛片| 日韩,欧美,国产一区二区三区 | 日日撸夜夜添| 久久久色成人| 亚洲欧美成人精品一区二区| 国产毛片a区久久久久| 亚洲欧美日韩无卡精品| 亚洲国产欧美人成| 国产麻豆成人av免费视频| 少妇丰满av| 日日撸夜夜添| 免费不卡的大黄色大毛片视频在线观看 | 三级国产精品欧美在线观看| 成人二区视频| 免费人成在线观看视频色| 久久精品91蜜桃| 亚洲成人中文字幕在线播放| av视频在线观看入口| 国产v大片淫在线免费观看| 99热精品在线国产| 身体一侧抽搐| 免费播放大片免费观看视频在线观看 | 日韩一本色道免费dvd| 丰满乱子伦码专区| 99久国产av精品| 99视频精品全部免费 在线| 国产黄a三级三级三级人| 色视频www国产| 精品不卡国产一区二区三区| 国产精品三级大全| 成人鲁丝片一二三区免费| 亚洲av二区三区四区| 亚洲欧美日韩无卡精品| 日韩亚洲欧美综合| 国产欧美日韩精品一区二区| 色5月婷婷丁香| 日日撸夜夜添| 国产亚洲精品久久久com| 麻豆成人av视频| 久久精品久久久久久噜噜老黄 | 亚洲精品日韩在线中文字幕| 美女xxoo啪啪120秒动态图| 十八禁国产超污无遮挡网站| 久久国产乱子免费精品| 丝袜美腿在线中文| 免费av观看视频| 99久久中文字幕三级久久日本| 女的被弄到高潮叫床怎么办| 亚洲激情五月婷婷啪啪| 女人十人毛片免费观看3o分钟| av线在线观看网站| 日本免费一区二区三区高清不卡| 亚洲国产欧美人成| 尤物成人国产欧美一区二区三区| 亚洲真实伦在线观看| 男女视频在线观看网站免费| 免费人成在线观看视频色| 国产一区二区三区av在线| 亚洲国产色片| 一个人看的www免费观看视频| 男的添女的下面高潮视频| 日本av手机在线免费观看| 免费在线观看成人毛片| 大香蕉久久网| 久久久精品94久久精品| 久久精品国产鲁丝片午夜精品| 国内少妇人妻偷人精品xxx网站| 18禁在线播放成人免费| 久久精品久久久久久久性| 亚洲成色77777| 国产一区二区亚洲精品在线观看| 中文字幕亚洲精品专区| 国产熟女欧美一区二区| 亚洲国产欧美在线一区| 桃色一区二区三区在线观看| 在线a可以看的网站| 我的老师免费观看完整版| 成人特级av手机在线观看| 水蜜桃什么品种好| 青春草国产在线视频| 国产精品1区2区在线观看.| 国产欧美另类精品又又久久亚洲欧美| 亚洲国产色片| 联通29元200g的流量卡| 婷婷色麻豆天堂久久 | 久久精品夜色国产| 亚洲av中文字字幕乱码综合| 精品久久久久久久久亚洲| 禁无遮挡网站| 亚洲在久久综合| av又黄又爽大尺度在线免费看 | 国产伦理片在线播放av一区| 一本—道久久a久久精品蜜桃钙片 精品乱码久久久久久99久播 | 亚洲成色77777| 亚洲精品国产成人久久av| 午夜久久久久精精品| 国产亚洲5aaaaa淫片| 2021少妇久久久久久久久久久| 欧美97在线视频| 久久久久久九九精品二区国产| 一本一本综合久久| 亚洲激情五月婷婷啪啪| 国产亚洲一区二区精品| 国产一区二区在线观看日韩| 九九爱精品视频在线观看| 搡女人真爽免费视频火全软件| 久久久久久久久久久丰满| 国产精品一及| 男女那种视频在线观看| 麻豆国产97在线/欧美| 欧美潮喷喷水| 国产精品爽爽va在线观看网站| a级一级毛片免费在线观看| 国产精品日韩av在线免费观看| 久久这里有精品视频免费| 国产精品三级大全| 亚洲,欧美,日韩| 69人妻影院| 日本熟妇午夜| 好男人视频免费观看在线| 插逼视频在线观看| 久久久久网色| 国产极品天堂在线| 亚洲av不卡在线观看| 国产不卡一卡二| 麻豆精品久久久久久蜜桃| 寂寞人妻少妇视频99o| 午夜福利在线观看吧| 欧美区成人在线视频| 久久午夜福利片| 国产又色又爽无遮挡免| 国产精品国产三级国产av玫瑰| 一本一本综合久久| 嘟嘟电影网在线观看| ponron亚洲| 欧美zozozo另类| 搞女人的毛片| 深夜a级毛片| 在线免费观看不下载黄p国产| 国产精品一区二区在线观看99 | 亚洲精品,欧美精品| 春色校园在线视频观看| 少妇高潮的动态图| 高清av免费在线| 啦啦啦韩国在线观看视频| 国产精品一区二区三区四区免费观看| АⅤ资源中文在线天堂| 精品久久久噜噜| 97人妻精品一区二区三区麻豆| 99在线视频只有这里精品首页| .国产精品久久| 丝袜美腿在线中文| 看免费成人av毛片| 综合色丁香网| 91狼人影院| 国产精品日韩av在线免费观看| 内地一区二区视频在线| 亚洲自拍偷在线| 国产单亲对白刺激| 久久欧美精品欧美久久欧美| 99久国产av精品国产电影| 最近中文字幕2019免费版| 综合色av麻豆| 可以在线观看毛片的网站| 久久久久久久久大av| 桃色一区二区三区在线观看| 少妇高潮的动态图| 亚洲精品国产成人久久av| 国产色婷婷99| 欧美最新免费一区二区三区| 人妻少妇偷人精品九色| 国产在视频线精品| 色综合色国产| 精品免费久久久久久久清纯| 久久这里有精品视频免费| 亚洲18禁久久av| 最近最新中文字幕大全电影3| 最新中文字幕久久久久| 男人狂女人下面高潮的视频| 精品国产一区二区三区久久久樱花 | 亚洲av二区三区四区| 69人妻影院| 精品少妇黑人巨大在线播放 | 99久久精品一区二区三区| 亚洲熟妇中文字幕五十中出| 真实男女啪啪啪动态图| 国内揄拍国产精品人妻在线| 女人被狂操c到高潮| 亚洲精品亚洲一区二区| 能在线免费观看的黄片| 日韩欧美 国产精品| 插阴视频在线观看视频| 国产精品.久久久| 亚洲欧美日韩卡通动漫| 两性午夜刺激爽爽歪歪视频在线观看| 日韩强制内射视频| 亚洲av中文字字幕乱码综合| 国产一区二区在线av高清观看| 久久这里有精品视频免费| 亚洲国产精品专区欧美| 老司机福利观看| 天堂中文最新版在线下载 | 日韩亚洲欧美综合| 国产免费一级a男人的天堂| 最后的刺客免费高清国语| 最近中文字幕2019免费版| 久久午夜福利片| 99视频精品全部免费 在线| 亚洲最大成人手机在线| 一级黄色大片毛片| 亚洲高清免费不卡视频| 黄色日韩在线| 校园人妻丝袜中文字幕| 国产伦一二天堂av在线观看| 观看美女的网站| 国产亚洲精品av在线| 久久精品影院6| 久久久久久久亚洲中文字幕| 黄片wwwwww| 国产乱来视频区| 亚洲精品自拍成人| 色噜噜av男人的天堂激情| 一级二级三级毛片免费看| 亚洲三级黄色毛片| 爱豆传媒免费全集在线观看| 蜜桃久久精品国产亚洲av| 日日撸夜夜添| 又黄又爽又刺激的免费视频.| 精品国产三级普通话版| 亚洲av不卡在线观看| 日本色播在线视频| 国产单亲对白刺激| 蜜臀久久99精品久久宅男| 简卡轻食公司| 精品一区二区三区人妻视频| 国产亚洲av嫩草精品影院| 中国美白少妇内射xxxbb| 噜噜噜噜噜久久久久久91| 欧美变态另类bdsm刘玥| 91久久精品国产一区二区三区| 欧美高清成人免费视频www| 我要看日韩黄色一级片| 国产成人精品一,二区| 久久人人爽人人爽人人片va| 国产探花在线观看一区二区| 亚洲欧洲日产国产| 久久久欧美国产精品| 青青草视频在线视频观看| 欧美人与善性xxx| 青青草视频在线视频观看| 国产成人freesex在线| 日本免费a在线| 亚洲最大成人中文| 免费看美女性在线毛片视频| 色5月婷婷丁香| 日日干狠狠操夜夜爽| 国产精品1区2区在线观看.| 日韩高清综合在线| 午夜福利在线观看免费完整高清在| 日本欧美国产在线视频| 在线观看av片永久免费下载| 精品无人区乱码1区二区| 黄片无遮挡物在线观看| 18禁动态无遮挡网站| 国内揄拍国产精品人妻在线| 精品人妻一区二区三区麻豆| 日韩欧美三级三区| 免费观看精品视频网站| 国产精品精品国产色婷婷| 三级经典国产精品| 亚洲欧美日韩高清专用| av在线观看视频网站免费| 久久精品国产亚洲网站| 日本与韩国留学比较| 狂野欧美白嫩少妇大欣赏| 精品人妻偷拍中文字幕| 女人十人毛片免费观看3o分钟| 不卡视频在线观看欧美| 国产免费视频播放在线视频 | 国产在线男女| 青青草视频在线视频观看| 大香蕉久久网| 免费观看的影片在线观看| 人妻夜夜爽99麻豆av| 三级国产精品片| 国产不卡一卡二| 午夜精品国产一区二区电影 | 美女内射精品一级片tv| 看十八女毛片水多多多| 99久国产av精品国产电影| 亚洲av中文av极速乱| 欧美成人免费av一区二区三区| 国产成人免费观看mmmm| 美女被艹到高潮喷水动态| 美女黄网站色视频| 亚洲丝袜综合中文字幕| 一级二级三级毛片免费看| 网址你懂的国产日韩在线| 一本久久精品| ponron亚洲| 老司机福利观看| 日韩欧美三级三区| 中文资源天堂在线| 亚洲av一区综合| 国产精品一区二区三区四区免费观看| 午夜老司机福利剧场| 国产免费一级a男人的天堂| 久久精品国产亚洲网站| 午夜日本视频在线| 精品人妻熟女av久视频| 在线观看av片永久免费下载| 久久精品久久精品一区二区三区| 国产精品蜜桃在线观看| 国产极品天堂在线| 欧美成人免费av一区二区三区| 久久99热这里只有精品18| 如何舔出高潮| 免费电影在线观看免费观看| 啦啦啦韩国在线观看视频| av在线天堂中文字幕|