• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Dynamic development model for long gap discharge streamer-leader system based on fractal theory

    2022-08-29 00:42:50JianghaiGENG耿江海QuanshengWANG王權圣XiaominLIU劉曉敏PingWANG王平FangchengLYU律方成andYujianDING丁玉劍
    Plasma Science and Technology 2022年9期
    關鍵詞:方成王權王平

    Jianghai GENG (耿江海), Quansheng WANG (王權圣) ,Xiaomin LIU (劉曉敏), Ping WANG (王平), Fangcheng LYU (律方成) and Yujian DING (丁玉劍)

    1 Hebei Provincial Key Laboratory of Power Transmission Equipment Security Defense, North China Electric Power University, Baoding 071003, People’s Republic of China

    2 China Electric Power Research Institute, Beijing 100192, People’s Republic of China

    Abstract Establishing a long air gap discharge model considering the streamer-leader transition and randomness of the discharge path is of great significance to improve the accuracy of discharge characteristic prediction and optimize external insulation design. Based on fractal theory and thermal ionization theory of streamer-leader transition, this work establishes a dynamic development model for the long air gap discharge streamer-leader system, which includes streamer inception, streamer development, leader inception, development of streamer-leader system and final jump. The positive discharge process of a 3 m rod plate is simulated to obtain the fractal distribution of the discharge path and the law of leader development for comparison with the discharge test results.The results show that the simulation model is similar to test results in the development characteristics of leader path distribution,each stage time and leader velocity.Finally,a simulation calculation of a 50%breakdown voltage of the rod-plate gap and ball-plate gap is carried out, with results fairly consistent with test data, proving the effectiveness and practicality of the model.

    Keywords: long air gap, fractal theory, thermal ionization, streamer-leader system, simulation model

    1. Introduction

    As the core part of the converter station of a DC transmission project,the valve hall is a closed space with multiple voltage levels and complex air gap types. The selected gap distance determines the operational reliability of related equipment,but many long gap discharge characteristic tests with huge costs are required. Therefore, predicting discharge characteristics through a long air gap discharge simulation model is helpful in order to save test costs, optimize insulation design and improve the economic efficiency and safety of a DC transmission project [1-3].

    Aiming at the physical mechanism of each long gap discharge stage, domestic and foreign scholars put forward simplified models of each stage based on a large number of test results. Bondiout and Gallimberti proposed a positive rod-plate gap discharge model to describe each stage of long gap discharge [4] and calculated the streamer current using the equivalent electron avalanche model, Goeliany et al calculated the space charge quantity using the distortion of space potential and simulated the gradual development of a streamer-leader system [5]. Subsequently, Becerra and Cooray optimized the charge distribution in the streamer zone and simulated the space charge using several ring charges with different radiuses [6]. In [7], the critical volume method is adopted to consider the dispersion of streamer inception and a space charge model considering the variable form of the streamer zone is established based on the charge simulation method, and a separately developed discharge path is simulated. The above models have realized simulation of the whole discharge process by calculating key physical parameters in each discharge stage but ignored the influence of discharge channel branch distribution and space charge distribution.However,the discharge channel branch distribution,especially the branch structure of the streamer zone, will affect distribution of the electric field in space [8], affecting the development of the leader channel and resulting in errors between simulation results and test values.

    In order to simulate the branching phenomenon in the streamer discharge process, domestic and foreign scholars have established various streamer discharge models based on fractal theory. Among them, the most classic fractal models are the DBM model [9] and WZ model [10], considering the influence of electric field distribution and random factors on streamer development. Reference [11] applied fractal theory to the simulation of a long gap discharge path and assumed that the streamer and leader are conductive channels with different conductivities. Reference [12] proposed a streamer growth probability model combined with the streamer discharge theory and fractal theory to simulate the space charge accumulation process with time in the streamer zone. Reference [13] presented an advanced 3D numerical model of lightning development using fractal theory, which has features such as bidirectional propagation and simultaneous growth of multiple branches. In a subsequent work, [14]studied the progression of negative lightning stepped leader including stepping and branching.This kind of model focuses on branch development characteristics of the simulation path and distribution of the predicted discharge path. It does not include the physical process of development of the streamerleader system.Therefore,it is difficult to predict the discharge characteristics.

    References [15, 16] proposed a transport model of discharge in a thunderstorm cloud, in which the probability of the emergence of streamers is considered in a new method,and the leader channel is formed by combining the currents of tens of thousands of streamers. This model combines the advantages of the two models mentioned above, and its morphology and electrical parameters of the calculated discharge tree agree with the existing lightning-discharge data.However,the simulated lightning discharge is different to the typical air gap discharge in transmission engineering in terms of gap size and voltage type.

    Therefore, in view of the shortcomings of the models above, this work establishes a dynamic fractal development model of long gap discharge, which includes streamer inception, streamer development, leader inception, development of a streamer-leader system and final jump based on the basic principles of fractal theory and thermal ionization theory of streamer-leader transition. This aims at the physical mechanism and random development characteristics of discharge paths in the long gap discharge process.First,a 3 m rod-plate gap discharge process was simulated and a long gap discharge test was carried out. Then, the simulated discharge path distribution and characteristic parameters of each stage were verified using the test results. Finally, the U50%breakdown voltages of the rod-plate gap and ball-plate gap were calculated,respectively,based on the model in this work,and the effectiveness and practicality of the model were verified.

    2. Dynamic fractal development model for long gap discharge

    Long gap discharge includes ionization and energy conversion processes with randomness. Based on the above characteristics, this work establishes a model for the long gap discharge development process, which considers the dispersion of streamer inception time delay according to critical volume theory,simulates the fractal development of streamers and leader development path based on fractal theory, and determines streamer-leader transition and development based on thermal ionization theory, to realize a whole process simulation of dynamic fractal development for long gap discharge.

    For the rod-plate gap structure shown in figure 1, the air gap is divided into M×N square grids with side length h,the rod electrode length is set as L and the gap distance is set as H in the fractal development model. The spatial potential φ of each grid point is obtained using the finite difference method:the potential of a grid point outside the discharge channel conforms to the results obtained from the Laplace equation;the potential inside the channel conforms to the results obtained from the Poisson equation:

    where ρ is the charge density inside the channel and ε0is the vacuum dielectric constant. The boundary conditions are set as follows: the potentials of the rod electrode and plate electrode are the first boundary conditions, and the electrode potential is equal to the applied voltage U0(t);the boundary in contact with the air in the solution area is the second boundary condition.

    2.1. Streamer inception

    Under the action of positive switching impulse voltage, the inception time delay of streamer t includes the boosting time delay t0required for boosting the critical electric field Ecof streamer inception and the statistical time delay tsrequired for the emergence of effective free electrons, among which the statistical time delay is one of the main factors leading to the dispersion of discharge inception.

    Figure 1. Grid division diagram of the rod-plate gap.

    According to the classic streamer theory, free electrons collide with air molecules in the process of moving towards the electrode under the action of electric field force in a strong electric field area where the ionization coefficient of electron collisions near the electrode head is greater than the attachment coefficient, resulting in an initial electron avalanche. When the positive charge generated by the initial electron avalanche is enough to support the formation of a secondary electron avalanche and realize the self-sustaining development of the discharge,the streamer incepts;that is,the boosting time delay t0.

    where Ncritis the critical positive charge quantity, that is,Ncrit=0.55×108; α is the ionization coefficient of electron collision and β is the electron attachment coefficient, both of which are functions of electric field intensity. R0is the boundary of the collision ionization zone, where α(Ec)=β(Ec), and Ecis the critical field intensity of the collision ionization zone.

    According to the critical volume theory of streamer inception,when the electric field intensity of the electrode head reaches E0,effective free electrons will be generated in a critical volume before streamer inception. At ts, the occurrence probability of effective electrons is proportional to the critical volume and voltage change rate, the statistical streamer inception time delay tscomplies with Rayleigh distribution,and its probability density function is as follows [17]:

    where k is the function of voltage change ratio and critical volume.Since the radius of the electrode will affect the critical volume,k finally represents the influence of the voltage change rate and electrode shape on the occurrence frequency of effective electrons, and its empirical formula can be obtained by fitting the experimental data.

    After the boosting time delay t0is obtained using formula(2), the statistical time delay tsis calculated according to the probability distribution of streamer inception, and the streamer inception time delay t is obtained.

    2.2. Streamer development

    After the inception of initial streamers, a point in the critical volume of the electrode rod head is randomly selected as the development point of the initial streamers.

    Figure 2.Schematic diagram of the streamer growth probability model.

    When calculating the development in the step m+1 of the streamers, the grid points surrounding them in which the electric field intensity is greater than Ecare selected as the possible development points in step m+1 for all spatial points that have become streamers, as shown in figure 2.

    Assuming that the time tirequired from the emergence of secondary electrons from a point to be developed (i, j-1) to the formation of a streamer channel with the developed point(i, j) satisfies the Weibull distribution, the probability density of the time required for each development step of the streamer p(t) is,

    where r(E) is a streamer growth probability function. Then,the probability of the next formation time tiof the streamer p(E) is,

    Assuming p(E)=ξ, ξ is a random number from 0 to 1 that complies with uniform distribution, tican be expressed as,

    According to the Biller model [18],

    where τ is the formation time constant and τ=2 μs is taken in this simulation, E is the electric field intensity at the point to be developed, η is the development probability index representing the relationship between discharge development probability and electric field intensity (its value is related to voltage type and electrode shape) and η=2 is taken in this simulation.

    When there are n possible points to be developed in the streamer zone,the formation time ti(0<i≤n)of the points to be developed is calculated in turn, and the point to be developed with the shortest formation time is set as the streamer development point in step m+1 and the shortest formation time is the time step tm+1of this step.

    The long gap discharge test shows that the average electric field intensity Esin the streamer zone is about 400-500 kV m-1,so the electric potential of each point in the streamer zone can be obtained using formula (8), and the calculated electric potential is set as the first boundary condition:

    where 1≤i≤m+1, d is the streamer length developed in step i+1 and φ1is the applied voltage U0(t) to the electrode rod.

    The Poisson equation is solved by the finite difference method to obtain the spatial potential distribution, and the charge quantity and current of the streamer channel are obtained by combining the current continuity equation and Ohm’s law. After discretization, the relationship between potential and charge is obtained as follows [12]:

    where tm+1is the development time of the streamer in step m+1, σ is the conductivity of the streamer channel and σ=0.025 S m-1is taken in this simulation.

    The total development time tstreamerin the streamer zone is,

    In the streamer development process, when there are no points to be developed around all developed points, it is considered that the streamer stops developing, and if the electric field around the developed points still does not meet the requirements of critical field intensity Ecwith the rise in voltage, it is considered that the discharge is over.

    2.3. Leader inception

    According to the thermal ionization theory for streamer-leader transition, when the streamer develops rapidly, a quantity of free electrons generated by the streamer branches enters the electrode along the common origin of the streamer branches.In the streamer root transformation zone, part of the energy generated by elastic and inelastic collisions between electrons and gas molecules is directly used for temperature rise,and another part of the energy stored in the form of electronic excitation energy, rotational kinetic energy, translational kinetic energy and vibrational kinetic energy is used to transfer the gas molecules, both of which jointly contribute to the temperature rise of gas molecules [19]. When the temperature of the streamer root reaches the critical temperature Tc=1500 K,negative ions decompose under the action of the thermal ionization mechanism,forming a large number of electrons and neutral molecules,making the conductivity in the streamer root transformation zone increase sharply [20]. Therefore, the streamer root is transformed into the initial leader.

    In the simulation, the vibrational kinetic energy Wv,translational kinetic energy Whand translational kinetic energy temperature Th[4] of the streamer root are calculated according to Gallimberti’s energy balance equation after each step of streamer development. When the temperature Th>1500 K,it is considered that the leader is generated and the streamer branches disappear.

    where k is the Boltzmann constant,nhis the molecular density of gas, fe, ft, frand fvare the distribution coefficients of electronic excitation energy,translational kinetic energy,rotational kinetic energy, and vibrational kinetic energy, respectively. In the simulation, fe+ft+fr=0.03 and fv=0.97, E is the field intensity at the streamer root and I is the current intensity flowing through the streamer root, τvtis the conversion time from vibrational kinetic energy to translational kinetic energy(the simulation uses τvt=5 μs), r is the initial radius of the streamer branch root(300 μm is taken in the simulation),εvis the energy required for vibration excitation of nitrogen molecules (0.28 eV is taken in the simulation) [19].

    Due to the inhibitive effect of distorted electric fields caused by the residual positive charge in space, the initial pilot cannot be developed immediately after being generated.At this time,the field intensity of the leader head is the sum of the background field intensity and the distorted field intensity caused by the space charge. In order to consider recovery of the electric field of the leader head, the conditions of initial leader inception are determined using formula (2). When the electric field of the leader head is recovered enough to meet the requirements of the field strength of streamer inception,the leader can be developed further.

    2.4. Streamer-leader development system

    After leader inception,the leader head generates a new streamer zone, guided by the head streamer branch; the streamer-leader system develops continuously. In the development process,electrons generated in the streamer zone transfer energy to neutral molecules in the transformation zone. When the temperature of the gas molecules reaches critical temperature Tc,it is considered that the main streamer channel is transformed into a new leader.The field intensity in front of the channel increases,which further promotes development of the streamer zone.Therefore, the streamer-leader system can develop on its own.

    In the simulation, the development process of the leader head streamer zone is consistent with section 2.2. The streamer root develops from the head of the new leader section.It is the first condition for temperature to reach Tcin order to achieve leader development.

    When selecting the leader channel, this model uses the leader head as the starting point,then selects the path with high charge density in the streamer zone as the leader development channel, and notes that the length of the ith leader microelement segment converted from the streamer in the path is li,and the total length of each newly developed leader segment is L=∑li. When the amount of charge qLrequired for the development of the leader channel per unit length is shown in a formula(14),it meets the second condition ΔQ≥LqL,that is,the amount of charge generated in the streamer zone is sufficient to support generation of this section of the leader into leader development. If the condition is not met, the streamer region continues to develop until a sufficient amount of charge is generated to support leader generation.where Kgis the leader shape coefficient,which is taken as 0.38 in simulation,tstreameris obtained using formula(8),andΔThis the difference between thermal ionization temperature and room temperature.

    The electron charge entering the leader head is the total amount of ionized electrons in the streamer zone, and the current Ilinjected into the leader head is expressed as,

    In the streamer-leader system development process, the leader channel is regarded as a conductor with a voltage drop,and the streamer zone is a weak plasma channel with a multibranch structure. In the simulation, the leader channel radius is 1.0 mm and the average field intensity Elin the leader channel is 0.5 kV cm-1.

    The leader head potential can be expressed as,

    The calculation steps of potential in the streamer zone are consistent with section 2.2.

    Considering the influence of current,the velocity v of the leader is expressed as [21],

    Then, the growth time tstepof each step of the streamerleader system can be calculated:

    where tleaderis the leader development time.

    2.5. Final jump

    During the development of the streamer-leader system, a large number of free charges accumulate in the air gap, and the streamer area gradually increases until the streamer extends to the plate electrode at a certain moment,the final jump of the leader occurs,then the gap breaks down, and the simulation process stops.

    Figure 3.Flow chart of leader initiation.

    After the streamer develops to the plate electrode, the leader channel and streamer are transformed into an electric arc channel with higher conductivity and higher temperature within a very short time. Therefore, only the development time of the streamer region tstreameris calculated.

    2.6. Simulation procedure

    The leader inception simulation procedure is shown in figure 3.First, the simulation applies operational impulse voltage U0(t) to the electrode and solves the potential and electric field distribution.Then, the streamer inception conditions are determined through formula(2)and the streamer inception time delay is calculated in combination with formula (3). According to the fractal development model of a streamer, the voltage boundary conditions are updated, the simulation streamer develops step by step, and the accumulation amount and development time of each step are recorded. After streamer development stops, the translational kinetic energy temperature of the streamer root is solved according to the energy balance equation of streamer root. If the temperature reaches the critical temperature of 1500 K, the streamer will be transformed into the initial leader.As the voltage continues to rise,the initial leader head electric field is recalculated, and the leader starts to develop when the electric field restores to the critical field intensity E0at the start of the streamer.

    Figure 4. Flow chart of streamer-leader development.

    After leader inception, the development of the streamerleader system is simulated in each step, including the fractal development of the streamer zone and leader transformation.Then, the physical parameters are calculated, such as the potential of the leader head and development time, as shown in figure 4. When the leader head streamer zone develops to the plate electrode, the leader has a final jump, followed by gap breakdown. During the simulation, if the streamer zone stops developing, it is considered to be gap tolerance.

    3. Model simulation results and verification

    According to the above simulation flow,the discharge process of a 3 m rod-plate gap was simulated under operational impulse voltage.The rod electrode length L was set to be 1 m,and the curvature radius of the head was set to be 2 cm while the gap distance H was 3 m and a standard operating shock wave with the peak value of 1000 kV was applied to the rod electrode. Typical simulation results are shown in figure 5.

    In this simulation, the inception time of the initial streamer is t1=20.32 μs, in which the statistical time delay ts=5.43 μs. At t2=26.57 μs, the initial streamer stops developing and turns into a leader. However, due to the shielding of space charge, the leader develops again at t3=33.64 μs and moves to the plate electrode. The leader head streamer reaches the plate electrode at t=114.43 μs,and then gap breakdown occurs.

    3.1. Analysis of discharge characteristics

    To verify the effectiveness of the simulation model,we built a rod-plate long air gap discharge observation system,as shown in figure 6. In the system, a high-speed camera is used to photograph the optical shape of the positive leader discharge channel, and a photomultiplier tube (PMT) is used to synchronously measure the instantaneous optical power in the discharge process, and each discharge stage is determined through the optical image and amplitude of optical power. In the test, a 6000 kV/450 kJ impulse voltage generator is used to apply the operational impulse voltage with the waveform of 250/2500 μs to the rod electrode, and the measurement accuracy of the capacitor voltage divider is 0.5%. The rod electrode is a 6 m long metal rod with a curvature radius of 2 cm. The ground electrode is a galvanized iron plate 11 m×11 m. In the test, three model H10721-210 PMTs are used,with a sampling frequency of 159 MHz(response speed of 6.29 ns)The PMTs are respectively placed at points 1.3 m from the gap axis, 1, 1.6 and 2.6 m from the ground. A Photron Fastcam SA5 high-speed camera is used, and the photographing speed is 7.5×104fps (photographing time interval is 13.33 μs). In order to achieve synchronous triggering of observation equipment, a Teledyne Lecroy 3024 oscilloscope is used to collect the voltage signal from the capacitor voltage divider as the trigger source. When the amplitude exceeds the trigger level, the oscilloscope synchronously collects the voltage signal, and the instantaneous optical power signal triggers the high-speed camera to photograph, and the delay time of each item of equipment meets the synchronous triggering condition [22].

    U50%is applied to the 3 m rod-plate gap for 40 repeated tests, and a typical test result is shown in figure 7.

    According to figure 7(a), the simulation results of leader discharge have high similarity with the optical images obtained from the test, which shows that the model in this paper is effective for predicting the discharge path.

    By comparing the high-speed image with the instantaneous optical power, each stage of the test discharge process is divided. PMT is more sensitive to the optical signal of the discharge process and higher in time resolution. Therefore,each stage of discharge is divided by the change in optical power in different stages.

    It can be seen from figure 7 that the initial streamer incepts at t1=11.38 μs, the optical power collected by PMT1 jumps with an amplitude of 200.8 pW,then the optical power gradually decreases and enters the dark period at t2=14.01 μs. At t3=19.47 μs, the optical power jumps again, indicating generation of the leader, and the high-speed camera captures the leader image at 28.04 μs. With development of the leader head, the optical power collected by PMT1 increases rapidly,exceeding the measured amplitude at t4=32.64 μs.It is considered that the leader has reached the position of PMT1.The development position and stage of the leader head can be determined by three saturation moments of PMT optical power. In the leader development stage, the leader develops 1 m downwards through T1=65.61 μs, and the average axial velocity is 1.52 cm μs-1. At the final jump stage, the leader reaches PMT3 through T2=65.61 μs, and the average velocity is 25.1 cm μs-1. Based on the optical observation results of the high-speed camera, the comparison between the position of the leader head in the 3 m gap and the simulation results is shown in figure 8.According to the above analysis, the simulation and test have similar results in leader path distribution, each stage time and leader development.

    Figure 5. Typical process simulation chart of leader discharge development in 3 m rod-plate gap.

    Figure 6. Layout of the long gap discharge observation system.

    Table 1.Comparison of the simulated results and experimental values for 3 m gap discharge.

    Figure 7.(a) Optical image of the discharge process and (b) change in optical power during discharge.

    Under the same simulation parameters, the leader development simulation is carried out many times and compared with the 40 test results. The comparison of physical macroscopic characteristics in the discharge process of a 3 m rod-plate gap is shown in table 1.

    From the table, it can be seen that the rod-plate gap has strong randomness and dispersion in discharge,but on the whole,the simulation results have good agreement with test results in leader development characteristics, such as breakdown time,leader velocity, charge accumulation, discharge current, etc,and the model has high rationality, in which the statistical time delay is 1.8-24.6 μs,duration of the dark period is 4.2-17.8 μs,leader velocity is 1.4-2.0 cm μs-1, final jump velocity is 14.5-32 cm μs-1, charge density of the leader channel is 42-57 μC m-1and leader discharge current is 0.5-1.4 A.

    Figure 8. Streamer-leader development position.

    Figure 9.Comparison of breakdown voltage.

    3.2. Breakdown voltage prediction

    In order to further verify the effectiveness of the simulation model and achieve prediction of breakdown voltage of the classic external insulation gap in power transmission and transformation projects,the U50%breakdown voltage of rod-plate gap and large-size ball-plate gap is simulated and calculated in this work, and compared with test results and the empirical formula[24] based on the gap coefficient method proposed by Paris. In the simulation, the gap distances with different lengths are set,250/2500 μs standard operation impulse voltage with positive polarity is applied to the rod electrode with a radius of 2 cm and the ball electrode with a radius of 1 m. The different gaps are simulated 30 times using a boosting method, respectively. The results are shown in figure 9.

    It can be seen from figure 9 that for the simulation of the rod-plate gap,the simulation value is similar to the test value and empirical formula. With the gap length increasing to 10 m,the maximum error reaches 5.5%;for the ball-plate gap,and the error between the simulation value and the test value is 4.6%-7.1%. For simulation of long gaps in large electrodes, the simulation value is generally higher than the test value.This is mainly because in practical simulation,in order to save calculation time and running memory,the subdivision size of the mesh is enlarged, which leads to a decrease in accuracy. However, the error is still within an acceptable range.This further illustrates the rationality and practicality of this model for the simulation of long gap discharge since the model not only simulates the physical process of discharge,but also predicts the breakdown voltage of the insulation gap.

    4. Conclusion

    Aiming at two characteristics, namely randomness and leader transformation of the long gap discharge path, this work establishes a dynamic development model for a long gap discharge streamer-leader system based on fractal theory and thermal ionization theory to provide a new path to study the randomness of long gap discharge paths and the law of discharge development.

    (1) The streamer-leader system in the model illustrates the development of a streamer zone and generation of space charge in the form of fractal development, which facilitates analysis of the guiding mechanism of streamer branch to leader path in the discharge process.(2) Through the model established in this work, the leader discharge process of a 3 m rod-plate gap is simulated to obtain the dark period time of 4.2-17.8 μs, breakdown time of 96.3-115.6 μs,leader velocity of 1.4-2.0 cm μs-1and final jump velocity of 14.5-32 cm μs-1. In addition,the rationality of the simulation results is verified through test results.(3) According to the model in the paper, the U50%breakdown voltage of the rod-plate gap and ball-plate gap is simulated and calculated, and the calculation results are highly consistent with test results and empirical formulas.This shows the practicality of the model in this paper in predicting the breakdown voltage of typical gaps in power transmission and transformation projects.

    Acknowledgments

    This work is supported by the Natural Science Foundation of Hebei Province (No. E2021502025).

    ORCID iDs

    Quansheng WANG (王權圣) https://orcid.org/0000-0001-9321-3758

    猜你喜歡
    方成王權王平
    篆刻作品欣賞
    法國舊制度時期的王家騎士團與王權
    我眼中的太陽
    Transmission-type reconfigurable metasurface for linear-to-circular and linear-to-linear polarization conversions
    篆刻作品欣賞
    吐蕃王權研究海外學術史鉤沉①
    淺析赫梯國王維護王權統治的監管措施
    厚德載物 方成大道
    如果歷史是一群喵
    王萬奇:吃苦耐勞方成大事
    金色年華(2016年7期)2016-02-28 01:39:29
    欧美亚洲日本最大视频资源| 无限看片的www在线观看| 亚洲男人的天堂狠狠| 亚洲天堂国产精品一区在线| 成人国语在线视频| 最近最新中文字幕大全免费视频| 国产成人精品无人区| а√天堂www在线а√下载| 在线天堂中文资源库| 国产黄a三级三级三级人| 黄色女人牲交| 久久精品国产亚洲av香蕉五月| 久久人人97超碰香蕉20202| 天天躁夜夜躁狠狠躁躁| 国产一区在线观看成人免费| 韩国精品一区二区三区| 精品国产亚洲在线| 午夜福利高清视频| 此物有八面人人有两片| 人人妻人人澡欧美一区二区 | 免费高清视频大片| 亚洲无线在线观看| 黄色视频,在线免费观看| 在线观看免费视频网站a站| 天天躁夜夜躁狠狠躁躁| 国产精品影院久久| 亚洲精品一区av在线观看| 国产男靠女视频免费网站| 亚洲片人在线观看| 美女高潮喷水抽搐中文字幕| 黄色视频,在线免费观看| 国产精品日韩av在线免费观看 | 久久久国产成人精品二区| 给我免费播放毛片高清在线观看| 后天国语完整版免费观看| 免费看十八禁软件| 久99久视频精品免费| 黑人操中国人逼视频| 久久久久亚洲av毛片大全| 亚洲欧美激情在线| 99国产极品粉嫩在线观看| 男人舔女人下体高潮全视频| 久久中文看片网| 1024香蕉在线观看| 不卡av一区二区三区| 不卡av一区二区三区| 色老头精品视频在线观看| 在线观看66精品国产| 97超级碰碰碰精品色视频在线观看| 欧美丝袜亚洲另类 | 日本黄色视频三级网站网址| 久久欧美精品欧美久久欧美| 久久亚洲精品不卡| 久久精品人人爽人人爽视色| 亚洲五月天丁香| 免费在线观看黄色视频的| 一卡2卡三卡四卡精品乱码亚洲| 一区二区三区国产精品乱码| 侵犯人妻中文字幕一二三四区| 亚洲少妇的诱惑av| 色综合站精品国产| 黄片大片在线免费观看| 老司机午夜十八禁免费视频| 在线播放国产精品三级| 一级毛片女人18水好多| 在线十欧美十亚洲十日本专区| 久久草成人影院| 久久久国产成人精品二区| 国产精品野战在线观看| 国产精品一区二区精品视频观看| 97碰自拍视频| 国产91精品成人一区二区三区| 淫秽高清视频在线观看| 美女午夜性视频免费| 亚洲五月色婷婷综合| 久久人人精品亚洲av| 日韩欧美一区视频在线观看| 美女高潮到喷水免费观看| 国产成人精品无人区| 夜夜夜夜夜久久久久| 91精品国产国语对白视频| 一级黄色大片毛片| 亚洲第一av免费看| videosex国产| 丝袜人妻中文字幕| 中出人妻视频一区二区| 真人做人爱边吃奶动态| 两性午夜刺激爽爽歪歪视频在线观看 | 免费无遮挡裸体视频| 一区二区三区高清视频在线| www.自偷自拍.com| 婷婷六月久久综合丁香| 精品久久久久久久毛片微露脸| 一本久久中文字幕| 精品午夜福利视频在线观看一区| 一级毛片女人18水好多| 欧美成人午夜精品| 巨乳人妻的诱惑在线观看| 在线天堂中文资源库| 电影成人av| 久久久久久亚洲精品国产蜜桃av| 人妻丰满熟妇av一区二区三区| 亚洲自偷自拍图片 自拍| 国产高清视频在线播放一区| 国产不卡一卡二| 日韩视频一区二区在线观看| 99在线视频只有这里精品首页| 丰满人妻熟妇乱又伦精品不卡| 色老头精品视频在线观看| 欧美日本亚洲视频在线播放| 91成年电影在线观看| 非洲黑人性xxxx精品又粗又长| 国产1区2区3区精品| 国产亚洲av高清不卡| 久久国产精品男人的天堂亚洲| 两个人免费观看高清视频| 久久午夜综合久久蜜桃| 国产亚洲精品一区二区www| 神马国产精品三级电影在线观看 | 一夜夜www| 一进一出抽搐动态| 国产精品久久电影中文字幕| 少妇熟女aⅴ在线视频| 午夜影院日韩av| 久久久国产精品麻豆| 大香蕉久久成人网| 免费久久久久久久精品成人欧美视频| 麻豆一二三区av精品| ponron亚洲| 亚洲中文av在线| 一级作爱视频免费观看| 亚洲在线自拍视频| 黑人巨大精品欧美一区二区mp4| 日韩精品免费视频一区二区三区| 视频区欧美日本亚洲| av福利片在线| 人妻丰满熟妇av一区二区三区| 天天一区二区日本电影三级 | 老司机午夜十八禁免费视频| 午夜福利影视在线免费观看| 搡老岳熟女国产| а√天堂www在线а√下载| 欧美日韩亚洲国产一区二区在线观看| 亚洲自偷自拍图片 自拍| 国产精品久久久av美女十八| 大陆偷拍与自拍| 国产国语露脸激情在线看| 丁香六月欧美| 少妇粗大呻吟视频| 在线天堂中文资源库| 操出白浆在线播放| 免费观看精品视频网站| 黄色 视频免费看| 亚洲视频免费观看视频| 大陆偷拍与自拍| 老司机午夜十八禁免费视频| 一本综合久久免费| 91成人精品电影| 精品国产一区二区久久| av天堂久久9| 亚洲成人免费电影在线观看| 精品乱码久久久久久99久播| 1024视频免费在线观看| 天堂影院成人在线观看| 又黄又爽又免费观看的视频| 一区福利在线观看| 男女下面插进去视频免费观看| 女人被狂操c到高潮| 又黄又粗又硬又大视频| 免费看a级黄色片| 国产精品精品国产色婷婷| 午夜福利视频1000在线观看 | 久久人人精品亚洲av| 国产黄a三级三级三级人| 在线观看日韩欧美| 国产精品野战在线观看| 此物有八面人人有两片| 亚洲av电影在线进入| 99久久精品国产亚洲精品| 又黄又粗又硬又大视频| 搡老岳熟女国产| 男女下面插进去视频免费观看| 亚洲国产中文字幕在线视频| av免费在线观看网站| 国产又色又爽无遮挡免费看| 日韩欧美免费精品| av福利片在线| 丝袜美足系列| 在线国产一区二区在线| 亚洲成人免费电影在线观看| 黄色女人牲交| 啪啪无遮挡十八禁网站| 性少妇av在线| 午夜免费鲁丝| 少妇 在线观看| 亚洲一区二区三区色噜噜| 纯流量卡能插随身wifi吗| 日韩精品青青久久久久久| 午夜福利一区二区在线看| 长腿黑丝高跟| 日韩欧美免费精品| 欧美成人性av电影在线观看| 国产亚洲欧美98| 精品卡一卡二卡四卡免费| 老熟妇仑乱视频hdxx| 亚洲精品美女久久av网站| 日本 欧美在线| 午夜久久久在线观看| 亚洲最大成人中文| 一a级毛片在线观看| а√天堂www在线а√下载| 99久久综合精品五月天人人| 黑人操中国人逼视频| 日本免费一区二区三区高清不卡 | 欧美大码av| 欧美日本视频| 自线自在国产av| 91精品三级在线观看| 一边摸一边抽搐一进一小说| 狂野欧美激情性xxxx| 9191精品国产免费久久| 自线自在国产av| 性色av乱码一区二区三区2| 久久久国产成人精品二区| 咕卡用的链子| 久久人人97超碰香蕉20202| 亚洲精品美女久久av网站| 国产精品秋霞免费鲁丝片| 丁香六月欧美| 村上凉子中文字幕在线| 国产主播在线观看一区二区| 大型av网站在线播放| 国产片内射在线| 国产视频一区二区在线看| 国产不卡一卡二| 久久人妻福利社区极品人妻图片| 午夜老司机福利片| www.熟女人妻精品国产| 黑人操中国人逼视频| 人人妻,人人澡人人爽秒播| 日日干狠狠操夜夜爽| 少妇的丰满在线观看| 色婷婷久久久亚洲欧美| avwww免费| 久久久久久久精品吃奶| 成人18禁在线播放| 亚洲 欧美 日韩 在线 免费| 亚洲av美国av| 大香蕉久久成人网| 亚洲 欧美一区二区三区| 村上凉子中文字幕在线| 免费观看人在逋| 一卡2卡三卡四卡精品乱码亚洲| 侵犯人妻中文字幕一二三四区| 国产精品香港三级国产av潘金莲| 男女床上黄色一级片免费看| 日日干狠狠操夜夜爽| 99久久精品国产亚洲精品| 真人做人爱边吃奶动态| 成人国产一区最新在线观看| 俄罗斯特黄特色一大片| 久久精品国产99精品国产亚洲性色 | 精品日产1卡2卡| 亚洲一区中文字幕在线| 午夜福利一区二区在线看| 日本 欧美在线| 久久热在线av| av天堂在线播放| cao死你这个sao货| 欧美日韩亚洲国产一区二区在线观看| 国产视频一区二区在线看| 欧美激情 高清一区二区三区| 亚洲精华国产精华精| 亚洲第一欧美日韩一区二区三区| 亚洲电影在线观看av| 日韩视频一区二区在线观看| 伦理电影免费视频| 伊人久久大香线蕉亚洲五| 18禁美女被吸乳视频| 欧美久久黑人一区二区| 人人妻,人人澡人人爽秒播| 久久人妻福利社区极品人妻图片| 97超级碰碰碰精品色视频在线观看| 国产精品野战在线观看| 黄色 视频免费看| 俄罗斯特黄特色一大片| 很黄的视频免费| 一区二区三区国产精品乱码| 亚洲片人在线观看| 麻豆国产av国片精品| 欧美最黄视频在线播放免费| 国产成人欧美| 90打野战视频偷拍视频| 国产激情久久老熟女| 亚洲一区二区三区色噜噜| 午夜亚洲福利在线播放| svipshipincom国产片| 亚洲精品国产区一区二| 香蕉丝袜av| 亚洲欧洲精品一区二区精品久久久| 国产精品综合久久久久久久免费 | 日韩大码丰满熟妇| 50天的宝宝边吃奶边哭怎么回事| 老司机靠b影院| 丝袜美腿诱惑在线| 免费久久久久久久精品成人欧美视频| 亚洲 欧美 日韩 在线 免费| 亚洲av成人av| 国产精品美女特级片免费视频播放器 | 丁香六月欧美| 欧美在线黄色| 午夜福利视频1000在线观看 | 午夜福利免费观看在线| 精品午夜福利视频在线观看一区| 日韩中文字幕欧美一区二区| 国产午夜精品久久久久久| 久久久国产成人精品二区| 黑人巨大精品欧美一区二区mp4| 国产一区二区激情短视频| 亚洲第一欧美日韩一区二区三区| 亚洲一区二区三区色噜噜| 叶爱在线成人免费视频播放| xxx96com| 亚洲自拍偷在线| 香蕉国产在线看| 少妇熟女aⅴ在线视频| 99在线人妻在线中文字幕| 人妻久久中文字幕网| 亚洲欧美精品综合一区二区三区| 亚洲男人天堂网一区| 热99re8久久精品国产| 国产精品乱码一区二三区的特点 | 法律面前人人平等表现在哪些方面| 免费在线观看影片大全网站| 日韩欧美免费精品| 国产高清videossex| 亚洲 国产 在线| cao死你这个sao货| 日日爽夜夜爽网站| 国产一区在线观看成人免费| 欧美色视频一区免费| 欧美绝顶高潮抽搐喷水| 国产成年人精品一区二区| 亚洲一区高清亚洲精品| 夜夜看夜夜爽夜夜摸| 中文字幕另类日韩欧美亚洲嫩草| 久久人人爽av亚洲精品天堂| 午夜福利18| e午夜精品久久久久久久| 乱人伦中国视频| 日韩有码中文字幕| 黑人巨大精品欧美一区二区蜜桃| 精品无人区乱码1区二区| 自线自在国产av| 一进一出抽搐动态| 亚洲伊人色综图| 国内精品久久久久久久电影| 婷婷精品国产亚洲av在线| 久久这里只有精品19| 日韩精品青青久久久久久| 99久久国产精品久久久| 女人高潮潮喷娇喘18禁视频| 日本vs欧美在线观看视频| 神马国产精品三级电影在线观看 | 制服诱惑二区| 悠悠久久av| 别揉我奶头~嗯~啊~动态视频| 免费在线观看影片大全网站| 18禁黄网站禁片午夜丰满| 老熟妇仑乱视频hdxx| av福利片在线| 人人妻,人人澡人人爽秒播| 日韩一卡2卡3卡4卡2021年| 亚洲精品在线观看二区| 久久精品国产99精品国产亚洲性色 | 国产av精品麻豆| 欧美乱码精品一区二区三区| 日韩欧美免费精品| 国产精品国产高清国产av| 亚洲av熟女| 色老头精品视频在线观看| 人成视频在线观看免费观看| 在线观看免费视频日本深夜| 这个男人来自地球电影免费观看| 欧美日韩黄片免| 一区在线观看完整版| 国产高清视频在线播放一区| 亚洲人成伊人成综合网2020| 国产成人系列免费观看| 人妻久久中文字幕网| 午夜a级毛片| 国产精品永久免费网站| 欧美黑人欧美精品刺激| 精品国内亚洲2022精品成人| 亚洲人成77777在线视频| 咕卡用的链子| 久久久久久久精品吃奶| 国产精品亚洲一级av第二区| 国产熟女午夜一区二区三区| 99国产极品粉嫩在线观看| 欧美黄色淫秽网站| 精品一品国产午夜福利视频| 成人18禁高潮啪啪吃奶动态图| 国产av一区二区精品久久| av天堂久久9| 男女床上黄色一级片免费看| 成人精品一区二区免费| 俄罗斯特黄特色一大片| 成人国产综合亚洲| www.www免费av| 国产99白浆流出| 午夜精品在线福利| 韩国精品一区二区三区| 成年女人毛片免费观看观看9| 国产真人三级小视频在线观看| 欧美另类亚洲清纯唯美| 宅男免费午夜| 日日爽夜夜爽网站| 国内毛片毛片毛片毛片毛片| 老熟妇乱子伦视频在线观看| 禁无遮挡网站| 此物有八面人人有两片| 亚洲欧美精品综合久久99| 精品一品国产午夜福利视频| 久久人人爽av亚洲精品天堂| 久久久国产精品麻豆| 午夜福利影视在线免费观看| 夜夜爽天天搞| 国产99白浆流出| 一进一出抽搐动态| 国产在线观看jvid| av天堂久久9| 亚洲精品美女久久av网站| 热re99久久国产66热| 亚洲九九香蕉| 国产精品免费视频内射| 久久久国产成人免费| 乱人伦中国视频| 久久久久国产一级毛片高清牌| 在线观看免费视频网站a站| 久久午夜综合久久蜜桃| 国产精品九九99| 香蕉久久夜色| 国产精品久久视频播放| 国产高清视频在线播放一区| 亚洲一区高清亚洲精品| 日韩欧美一区二区三区在线观看| 国产99久久九九免费精品| 日韩视频一区二区在线观看| 9热在线视频观看99| 丝袜人妻中文字幕| 亚洲专区中文字幕在线| 国产精品亚洲av一区麻豆| 国产主播在线观看一区二区| 一级毛片女人18水好多| 叶爱在线成人免费视频播放| 亚洲欧美精品综合一区二区三区| 国产熟女午夜一区二区三区| 色在线成人网| 天堂影院成人在线观看| 搡老岳熟女国产| 美女扒开内裤让男人捅视频| 欧美黑人欧美精品刺激| 欧美乱码精品一区二区三区| 国产精品 国内视频| 妹子高潮喷水视频| 亚洲成a人片在线一区二区| 午夜福利欧美成人| 9色porny在线观看| 大陆偷拍与自拍| 亚洲色图av天堂| 亚洲五月婷婷丁香| 国产精品影院久久| 午夜成年电影在线免费观看| 十八禁网站免费在线| 韩国av一区二区三区四区| 满18在线观看网站| 欧美日韩黄片免| 免费不卡黄色视频| 色综合亚洲欧美另类图片| 国产激情欧美一区二区| 男女之事视频高清在线观看| 日韩中文字幕欧美一区二区| 亚洲人成伊人成综合网2020| 精品人妻在线不人妻| 精品国内亚洲2022精品成人| 18禁美女被吸乳视频| 久久香蕉精品热| 国产国语露脸激情在线看| 日本欧美视频一区| 成人18禁在线播放| 亚洲av日韩精品久久久久久密| www日本在线高清视频| 大香蕉久久成人网| 免费看a级黄色片| 国产精品永久免费网站| 成人免费观看视频高清| 欧美日韩精品网址| 久99久视频精品免费| 久久国产精品男人的天堂亚洲| 久久热在线av| 久久中文字幕一级| 欧美成人午夜精品| 免费不卡黄色视频| 午夜免费观看网址| 韩国av一区二区三区四区| 中亚洲国语对白在线视频| 国产精品综合久久久久久久免费 | 日韩欧美国产一区二区入口| 午夜成年电影在线免费观看| 久久久久久国产a免费观看| 岛国在线观看网站| 久久久国产成人免费| 97人妻精品一区二区三区麻豆 | 欧美日本视频| www.www免费av| 欧美一区二区精品小视频在线| 黄色片一级片一级黄色片| 国产精品影院久久| 99久久精品国产亚洲精品| 国产亚洲精品第一综合不卡| 两人在一起打扑克的视频| 免费看a级黄色片| 亚洲欧美激情综合另类| 男女午夜视频在线观看| 免费不卡黄色视频| 波多野结衣av一区二区av| 成年女人毛片免费观看观看9| 国产成人系列免费观看| 欧美成人免费av一区二区三区| 亚洲国产看品久久| 午夜成年电影在线免费观看| 亚洲激情在线av| 亚洲在线自拍视频| 一二三四社区在线视频社区8| 久久青草综合色| 亚洲美女黄片视频| 亚洲成国产人片在线观看| 99re在线观看精品视频| www.精华液| 久久天堂一区二区三区四区| 两个人看的免费小视频| 中文字幕人妻丝袜一区二区| 精品国内亚洲2022精品成人| 国产一区二区在线av高清观看| 亚洲国产欧美网| 一二三四社区在线视频社区8| 一级毛片精品| 亚洲狠狠婷婷综合久久图片| 国产成+人综合+亚洲专区| 高清黄色对白视频在线免费看| 精品福利观看| 黄片大片在线免费观看| 国产精品综合久久久久久久免费 | 在线十欧美十亚洲十日本专区| 视频在线观看一区二区三区| 亚洲 欧美 日韩 在线 免费| 久99久视频精品免费| 亚洲自拍偷在线| 人妻久久中文字幕网| 欧美老熟妇乱子伦牲交| 久久 成人 亚洲| 51午夜福利影视在线观看| 久久国产精品影院| 久久香蕉激情| 亚洲国产毛片av蜜桃av| 久久伊人香网站| 国产一区二区三区综合在线观看| 咕卡用的链子| 一级,二级,三级黄色视频| 国产高清视频在线播放一区| 十分钟在线观看高清视频www| 亚洲精品久久成人aⅴ小说| 国产精品一区二区免费欧美| 亚洲狠狠婷婷综合久久图片| 午夜激情av网站| 成年人黄色毛片网站| 此物有八面人人有两片| 婷婷丁香在线五月| 黄片小视频在线播放| 黄色毛片三级朝国网站| 国产精品av久久久久免费| www日本在线高清视频| 午夜免费激情av| 久久人人97超碰香蕉20202| 久久精品国产99精品国产亚洲性色 | 免费看a级黄色片| 人妻久久中文字幕网| 宅男免费午夜| 一级毛片精品| 日韩欧美免费精品| 黄色成人免费大全| 两性夫妻黄色片| 波多野结衣高清无吗| 婷婷丁香在线五月| 国产91精品成人一区二区三区| 99精品在免费线老司机午夜| 黑丝袜美女国产一区| 一边摸一边抽搐一进一出视频| 亚洲国产欧美一区二区综合| 欧美亚洲日本最大视频资源| 日本撒尿小便嘘嘘汇集6| 久久国产精品男人的天堂亚洲| 午夜久久久久精精品| 91精品三级在线观看| 91九色精品人成在线观看| 亚洲黑人精品在线| 亚洲成人免费电影在线观看| 国产麻豆69| 国产在线观看jvid| xxx96com| 亚洲性夜色夜夜综合| 一级a爱视频在线免费观看| 免费在线观看黄色视频的| 美女午夜性视频免费|