• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Photon and positron production by ultrahigh-intensity laser interaction with various plasma foils

    2021-04-22 05:34:06
    Plasma Science and Technology 2021年4期

    School of Physics Science and Technology,Xinjiang University,Urumqi 830046,People’s Republic of China

    Abstract The generation of γ photons and positrons using an ultrahigh-intensity laser pulse interacting with various plasma solid foils is investigated with a series of quantum electrodynamic particlein-cell(PIC)simulations.When ultrahigh-intensity lasers interact with plasma foils,a large amount of the laser energy is converted into γ photon energy.The simulation results indicate that for a fixed laser intensity with different foil densities,the conversion efficiency of the laser to γ photons and the number of produced photons are highly related to the foil density.We determine the optimal foil density by PIC simulations for high conversion efficiencies as approximately 250 times the critical plasma density,and this result agrees very well with our theoretical assumptions.Four different foil thicknesses are simulated and the effects of foil thickness on γ photon emission and positron production are discussed.The results indicate that optimal foil thickness plays an important role in obtaining the desired γ photon and positron production according to the foil density and laser intensity.Further,a relation between the laser intensity and conversion efficiency is present for the optimal foil density and thickness.

    Keywords:laser-plasma interaction,positron generation,γ ray emission,nonlinear Compton scattering,particle-in-cell(PIC)simulation

    1.Introduction

    The rapid progress of ultraintense laser technology has opened some promising areas in strong field physics.Some new laser facilities[1],such as the Extreme Light Infrastructure(ELI)[2],iCAN[3],and Apollon laser[4]projects,promise to provide a 10-100 PW class laser,with a corresponding laser intensity of over 1023W/cm2.For such ultrahigh-intensity lasers,the quantum electrodynamic(QED)effects are dominated in most laser-plasma interactions,such as γ photon emission and positron production[5-11].

    In recent years,γ photon emission and positron production by ultrahigh-intensity lasers have been intensely studied because of the variety of important applications in various areas,such as nuclear and particle physics research[12],laboratory astrophysics[13,14],and medical imaging and radiography[15,16],as well as for the development of materials science and to motivate novel industrial applications[17].

    Recently,several studies have indicated that ultrahighintensity laser-plasma interaction could trigger the processes of γ photon emission and electron-positron pair production[10,11,18-23].Various mechanisms have been proposed[24-28]and,simultaneously,considerable theoretical and numerical studies have been undertaken to provide detailed physical explanations for these QED processes[5-11,18-31].If the generation process of the γ photon can be triggered,it will produce a dense beam of positrons in the laboratory,which will facilitate several new fields of research[12,14,18-21].

    In the study of ultrahigh-intensity laser-plasma interactions,the three most commonly investigated QED processes include the Bethe-Heitler(BH)[24],Breit-Wheeler(BW)[25],and trident[26-28]processes.In the trident process,the electron-positron pairs are produced by energetic electrons interacting with the Coulomb field or the strong laser field[27,28].Under relatively moderate laser intensities(I~1022W/cm2),electrons are accelerated into high-Z nuclei,which results in the generation of positrons.In the BH process,electron-positron pairs are produced by nuclei interacting with γ photons radiating from decelerated electrons[24].Some studies have indicated that electron-positron pairs could be produced by direct laser-plasma foil interactions through the trident and BH processes.However,the positron yields obtained from experiments are too low to be used in applications,so it is necessary to enhance the energy conversion efficiency,positron yield,and energy.In the BW process,under a super-intense laser condition,the electrons are accelerated by the laser field and radiate γ photons through nonlinear Compton scattering.Consequently,electron-positron pairs are produced by the multiphoton BW process(γ+nγlaser→e?+e+)[25],which produces additional γ photons and electron-positron pairs,resulting in QED cascades[11,20].Recently,some particle-in-cell(PIC)simulation studies have predicted that in ultrahigh-intensity laser-plasma interaction,high-energy electron-positron pai rs can be generated through the BW process.

    In this paper,we research ultrahigh-intensity laser and plasma foil interactions to produce high-energy photons and positrons using numerical simulations.We perform twodimensional(2D)QED-PIC simulations using EPOCH code[32].We present the simulation results for foils of various densities,thicknesses,and materials,as well as with different laser intensities.We show that there exists an optimal foil density and thickness,which play key roles in enhancing the energy conversion efficiency,number of produced photons,and positron number.We also investigate the interactions of laser pulses with different intensities and the optimized plasma foil.The simulation results show that a suitable laser intensity is also crucial to enhance the photon emission and trigger the QED cascade.

    2.Model and simulation parameters

    PIC simulation is an effective tool for studying certain fields in laser-plasma interaction physics,such as in laser-based particle acceleration,high-energy-density physics,fast ignition in inertial confinement fusion,etc.[33-37].Since the coupling between the QED processes and plasma dynamics is very complicated,numerical simulations have recently been shown to be an effective way to clearly explore such interactions.Therefore,a series of QED-PIC simulation investigations have been performed on QED processes in laserplasma interactions[9-11,20,38].

    In our 2D PIC simulations,linearly polarized ultrahighintensity laser pulses enter the simulation area from the right side at t=0,propagate along the positive x direction,and are incident normally onto the thin plasma foil.The laser has a Gaussian intensity profilewith wavelength λ=1 μm,focal spot y0=1 μm and duration TL=15 fs.The peak intensity of the laser is I=4×1023W/cm2,which corresponds to a normalized laser amplitude of a0=eA/mec2=540,where e and meare the electron charge and mass,respectively,A is the vector potential,and c is the speed of light in a vacuum.In the simulations,we used carbon,aluminum,and gold flat foils to compare the effect of the target material on the photon emission.The foil height in the y direction was 6 μm,the foil front surface was located at x=2 μm,and four different foil thicknesses were considered in the simulation.The simulation box size was 6 μm(x)×6 μm(y)with a grid of 600×600 cells.For the number of particles in each cell,we chose 100 electrons and 50 ions.The longitudinal and transverse initial temperatures of the electrons and ions were so small that their effects could be ignored.The boundary conditions were periodic in the transverse direction and simple-outflow longitudinally.

    In our simulations,we consider the radiation reaction regime and the γ photon emission is characterized by QED parameterwhich requires χe≥1 for efficient photon emission.A multiphoton BW process is considered for positron production,which is characterized by another QED parameterand Kγare the 4-momenta of the electron and photon,respectively,and Fμνis the field tensor.These processes are enabled in EPOCH code with a QED block via Monte Carlo algorithm.

    3.Simulation results

    In order to show the effect of the target density on photon emission and positron generation,we compared the 2D QEDPIC simulation results for plasma foils with different densities.Figure 1(a)shows the relations between foil densities and conversion efficiencies of the laser energy to electrons,photons,and positrons for various foil densities with a fixed foil thickness and laser parameters at 16.7 fs.From this figure,we observe that the conversion efficiencies(defined as the fraction of total laser energy carried by each species)to electrons,photons,and positrons increased rapidly with foil density until ne=250nc,then decreased with foil density to approximately ne=500nc,and then decreased very slowly with a further increase in the foil density.Figure 1(b)shows a plot of the spatial evolution of the photon number for various foil densities with the same foil thickness and laser parameters as those in figure 1(a)at 16.7 fs.More photons were produced with an increase in the foil densities until ne=250nc;then,for the photon number as well as its distributions,no obvious differences were observed between the ne=400nc,500nc,and 700nccases.It is worth noting that the peak of the photon number spatial distributions moved to the left with increasing foil density,as shown in figure 1(b).This was attributed to the different laser penetration depths for the various foil densities,as discussed in figure 2.

    Figure 1.(a)Laser energy to electrons,photons,and positrons conversion efficiencies as well as the total conversion efficiency,and(b)spatial evaluation of the photon number in the x direction for different foil densities at 16.7 fs.The foil density ne varies from ne=50nc to ne=700nc while the foil thickness is fixed at l=1 μm.

    Figure 1 shows that the conversion efficiencies and produced photon numbers were highly dependent on the foil density,which plays a key role in laser plasma interaction QED problems for given laser parameters.The results indicate that there exists an optimal foil density,which results in an enhancement of the energy conversion efficiency and the produced photon number.When the chosen foil density is optimal,more photons and positrons are obtained under the proper laser conditions.The optimal foil density in our studied case,which was determined by 2D QED-PIC simulations,was ne=250ncfor a0=540 and l=1 μm,as shown in figure 1.The optimal foil density for different foil thicknesses and laser intensities is discussed in the following parts of this paper.

    Figures 2(a)-(f)present the spatial distributions of the electron density in the(x,y)plane at 16.7 fs for foil densities of ne=100nc,250nc,400nc,500nc,600nc,and 700nc,respectively.Figure 2(a)shows that,for the low-density foil(ne=100nc),the foil was transparent to the ultrahigh-intensity laser,owing to relativistic transparency.Moreover,the strong ponderomotive force of the laser expels target electrons from the high-field region very easily.Consequently,there was no reflected laser field and the standing wave could not develop inside the foil.This resulted in a lower conversion efficiency of the laser energy to electrons and lower photon emission.However,for the foil density of ne=250nc,a highdensity electron layer was produced in the right half of the foil with a thickness of approximately 0.5 μm and a density of ne=400nc,as shown in figure 2(b).With a further increase in the foil density,the thickness and density of the electron layer decreased and increased,respectively.More importantly,unlike in the ne=250nccase,the electron layer was produced in the left half of the foil for the higher-density foil cases,as shown in figures 2(c)-(f).This meant that for the foils with density higher than the optimal density(ne=250nc),the penetration depth of the laser into the foil was shortened and the laser was reflected from the front surfaces of the foils.This resulted in a lower energy conversion of the laser energy to electrons,which finally led to small amounts of photon and positron generation.

    The spatial distributions of the transverse electric field Eyin the(x,y)plane and phase space distribution of electrons at t=16.7 fs for different foil densities(ne=100nc,250nc,400nc,and 700nc)are given in figure 3.Figure 3(a)shows that for the foil with density ne=100nc,almost all of the laser fields were transmitted to the back of the foil without any disruption of the foil and some energetic electrons appeared at the back of the foil,as shown in figure 3(a1).However,for the ne=250ncfoil,the laser field penetrated deep into the foil and was reflected from the high-density electron layer at the right side of the foil,as shown in figure 3(b).More importantly,more energetic electrons stayed in the laser reflection region,as shown in the phase space portrait of figure 3(b1).For the foils with densities of ne=400ncand ne=700nc,almost all of the laser fields were reflected from the foil front surface without penetration and there were few energetic electrons in the laser reflection region,as shown in figures 3(c),(d),(c1),and(d1).All these results indicated that for the lower foil density,the laser was easily transmitted to the back of the foil and there was no reflected field.This resulted in lower correlation and conversion efficiencies between the laser and electrons,as shown in figures 1 and 2.For the ne=400ncand ne=700nccases,there were highdensity electron layers at the front side of the foil(see figure 2),which acted like a plasma mirror and instantly reflected almost all of the laser fields.Consequently,the incident and reflected lasers had less chance to interact with electrons,which resulted in a lower conversion efficiency.However,for the case of ne=250nc,the laser could penetrate deep into the foil,and the dense electron layer produced at the rear of the foil could reflect the laser field like a plasma mirror(see figure 2(b)).Accordingly,more energetic target electrons remained in the high-field region,as shown in figures 3(b)and(b1).This resulted in enhancements of the conversion efficiencies and the chance of photon emission as well as positron production.

    We can estimate the optimal target density by theoretical analysis for our simulated case,where the laser field is fully reflected by the high-density electron layer.The laser radiation pressure for this case can be expressed as Prad=2I(1+R+T)/c,and we assume that the laser field is fully reflected by the high-density electron layer,which acts as a plasma mirror,so we have T=0 and R=1.Let us assume that when the target density is equal to the optimal density,an electron-ion double layer is developed and the laser radiation pressure is compensated by the pressure of the electrostatic fieldwhereis the charge separation electrostatic field and y0is the laser focal spot radius.The distance is chosen as y0/2 since at this point the radiation pressure is maximal[39].We obtain an estimate of the optimal target density.It gives the valuefor a laser pulse with an intensity of I=4×1023W/cm2and a focal spot radius of y0=1 μm.This result agrees very well with our PIC simulation results.

    Figure 2.Spatial distribution of the electron densities in the(x,y)plane at 16.7 fs for foils with densities of ne=100nc(a),ne=250nc(b),ne=400nc(c),ne=500nc(d),ne=600nc(e),and ne=700nc(f).

    Figure 3.Spatial distribution of the transverse electric field Ey in the(x,y)plane(top row)and phase space distribution of electrons(x,px)at t=16.7 fs for foils with densities of ne=100nc[(a)and(a1)],ne=250nc[(b)and(b1)],ne=400nc[(c)and(c1)],ne=700nc[(d)and(d1)].The electric field is normalized by mecω0/c.

    Figure 4 plots the spatial distributions of the photon and positron densities in the(x,y)plane at 16.7 fs,with the foil thickness l=1 μm and densities of ne=100nc,250nc,400nc,500nc,600nc,and 700ncfor a0=540.Both the photon and positron densities were shown to be closely related to the foil density.For the foil with a density of approximately ne=250nc,as mentioned above(figure 3),the laser fields were reflected by the high-density electron compressed layer at the rear of the foil and an electromagnetic standing wave was produced by the incident and reflected laser fields.Accordingly,the electron motion in the standing wave led to more efficient photon emission and positron production than in the other density cases.These results also confirmed that ne=250ncwas the optimal density for an l=1 μm plasma foil interacting with ultrahigh-intensity laser pulses with a0=540.

    Figure 4.Spatial distribution of the photon(top row)and positron(bottom)row densities in the(x,y)plane at 16.7 fs for foils with densities of ne=100nc[(a)and(a1)],ne=250nc[(b)and(b1)],ne=400nc[(c)and(c1)],ne=500nc[(d)and(d1)],ne=600nc[(e)and(e1)],and ne=700nc[(f)and(f1)].

    Figure 5.Electron phase space distribution(x,px)for the(a)l=0.5 μm,(b)l=1 μm,(c)l=2 μm,and(d)3=1 μm cases.Laser energy to(e)electrons,photons and total,and(f)positron conversion efficiencies for different foil thicknesses at 16.7 fs.The foil density ne is fixed to the optimal density of ne=250nc,while the foil thickness is varied.

    Next,we investigated the effect of the foil thickness on the efficiency of photon emission and positron production.According to the results from figures 1-4,we chose the optimal foil density ne=250ncand normalized laser intensity a0=540 for this section.Therefore,we studied the phase space distribution of electrons and the evolution of the conversion efficiencies with foil thickness,as shown in figure 5.Figures 5(a)-(d)show that for the l=0.5 μm case,electrons have broad phase space distribution at the front and back of the target.However,for the l=1,2 and 3 μm cases,the electrons have similar phase space distribution and the energetic electrons are confined in the laser reflection zone.Figures 5(e)and(f)show that all the conversion efficiencies increased rapidly with the foil thickness until l=1 μm,and then remained unchanged with a further increase in the foil thickness.This indicated that for a given laser intensity and foil density of ne=250nc,l=1 μm was a favorable foil thickness to enhance the energy conversion efficiencies and photon emission.

    Figure 6.Spatial distribution of the electron densities(top row)and the transverse electric field Ey(bottom row)in the(x,y)plane at 16.7 fs.The foil density ne is fixed at the optimal density of ne=250nc,while the foil thickness varies.

    To validate our above statements,we determined the spatial distributions of the electron density and the transverse electric field Eyin the(x,y)plane at t=16.7 fs for different foil thicknesses,as shown in figure 6.We observed that when the foil thickness l was too small,that is,l=0.5 μm,it could not satisfy the condition of electron-ion double layer formation(which isμmin our case),the foil was transparent to the incident laser,and the laser pulse continued to travel and push some electrons in front of the laser pulse like a light sail,as shown in figures 6(a)and(a1).This normally results in suppression of the energy conversion efficiencies,as mentioned in the previous paragraph.However,for the foil thicknesses of l=2 and 3 μm,the highdensity-electron compressed layers were observed(hole-boring process)at the same place with the same density as in the case of l=1 μm,as shown in figures 6(b)-(d).Furthermore,the spatial distribution of the transverse electric field Eyin the(x,y)plane was similar for all three cases,as shown in figures 6(b1),(c1),and(d1).Thus,there were similar conversion efficiencies for the l=1,2,and 3 μm cases,as shown in figure 5.

    We investigated the relation between the laser intensity and conversion efficiencies,which included the total conversion efficiency as well as the conversion efficiencies to electrons,photons,and positrons.We undertook PIC simulations for two kinds of plasma foils with densities of ne=250ncand ne=500nc,while the foil thickness was fixed as 1 μm and the dimensionless laser amplitude was varied 11 times as a0=50,100,200,300,400,500,600,700,800,900,and 1000.The conversion efficiencies as a function of the laser amplitude a0for the ne=250ncdensity case are shown in figure 7(a).The total energy conversion efficiency increased,reached a maximum of approximately 70%,and then decreased almost linearly with the laser amplitude a0.The fraction of the energy coupled to electrons steadily decreased from 60% to approximately 20% with increasing laser amplitude.The conversion efficiency to photons increased rapidly from a few percent,reached a maximum of approximately 25%,and then became saturated with the increase in laser intensity.It is worth noting that the laser energy coupled to electrons was comparable to that of the photons at approximately a0=650.As the laser intensity increased,the photons absorbed more energy than the electrons.

    Figure 7.Energy conversion efficiencies for(a)a low-density plasma foil(ne=250nc)and(b)a high-density plasma foil(ne=500nc)with different laser amplitudes.The foil thickness is fixed at l=1 μm.

    Figure 8.Energy spectra of the electrons,photons and positrons for different target materials at t=16.7 fs with/without ion mobility:(a)for carbon,(b)for aluminum,and(c)for gold.Here,the optimal target density and thickness are used.

    Figure 9.Distributions of QED parameter χe for different target(a)densities,(b)thicknesses,and(c)materials at t=16.7 fs with mobile ions.

    Table 1.Energy conversion efficiencies for different target materials with/without ion mobility.

    The conversion efficiencies as a function of the laser amplitude a0for the ne=500ncdensity case are shown in figure 7(b).In this case,the total conversion efficiency decreased with a0,and the general trend for the electron,photon,and positron conversion efficiencies was similar to the ne=250nccase.Moreover,the conversion efficiencies to the electrons and photons were the same at the laser intensity of approximately a0=650,which was the same as the ne=250nccase.However,the energy absorbed by both electrons and photons decreased to approximately 12%at this critical intensity,which was less by approximately 10% than the ne=250nccase.This,generally,could be attributed to the fact that for the lower-density case(ne=250nc),the laser penetration distance was larger than that in the higher-density case(see figure 2),which directly resulted in higher energy conversion efficiencies to each species and enhancement of the photon emission and positron generation.

    4.Discussion

    In this section,we discuss the effects of the target materials and ion mobility on the conversion efficiency and photon emission.Figure 8 shows the electron energy spectra for different target materials with and without ion mobility.For the lower Z target,the cut-off energies and conversion efficiencies of the species were smaller than those for higher Z targets both with and without ion mobility,as shown in figure 8(a)and table 1.For the aluminum target,the cut-off energies for all species were almost the same and there was no significant change in the energy conversion efficiencies with and without ion mobility,as shown in figure 8(b)and table 1.However,for the gold target with immobile ions,the cut-off energies and number of the species were higher than those in the immobile ion case,as shown in figure 8(c),and the conversion efficiencies decreased remarkably for the mobile ion case,as shown in table 1.

    Finally,we discussed the distribution of the QED parameter χefor different target densities,thicknesses,and materials.The photon emission is governed by an invariant QED parameter χeand it is required that χe≥1 for efficient photon emission,where.For the low-density and thin aluminum target,the double-layer formation condition is not satisfied and electrons experience light sail acceleration in front of laser pulse,the electrons have high energy(see phase space distribution in figures 3 and 5),and χe≥1,as shown in figures 9(a)and(b).However,electrons cannot stay in the high-field region,which results in reducing the efficiency of photon emission.For the optimal target density,more electrons with higher χestay in the highfield region,increasing the efficiency of photon emission.For the targets of density higher than the optimal density,the value of χedecreases to half of that for the optimal density case,while for thicker targets,the distributions of χeare unchanged,as shown in figure 9(b).Figure 9(c)shows the distributions of χefor different target materials with ion mobility.It is found that the value of the χeis higher for the aluminum target than for the other two target cases.

    5.Conclusion

    In this paper,we have numerically studied the interactions of ultrahigh-intensity femtosecond laser pulses and various plasma foils.The effects of the foil density and thickness on energy conversion efficiencies were studied,and laser pulses with different peak intensities were used to generate more γ photons and pairs.

    First,we have numerically investigated the effect of foil density on the energy conversion efficiencies and the positron number.The PIC simulation results reveal that for the same laser intensity,the energy conversion efficiency of the laser to γ photons and the produced photon number are highly related to the foil density.We found an optimal foil density of approximately 250ncby PIC simulations and theoretical analysis,which plays a key role during laser-plasma interaction QED processes.Second,using the optimal foil density,we performed simulations for foils with different thicknesses and observed an optimal foil thickness,which resulted in higher energy conversions and pair production.Finally,we investigated the relation between the laser intensity and conversion efficiencies.By comparatively evaluating the energy conversion efficiencies of two density cases(250ncand 500nc)with the optimal thickness,we found that the laser energy to photon conversion efficiency is enhanced by approximately 10%when the foil density is optimized.All of these findings indicate that foil design optimization is essential for a high-efficiency QED process.

    Acknowledgments

    This work was financially supported by National Natural Science Foundation of China(No.11 664 039).The authors are particularly grateful to CFSA at the University of Warwick for allowing us to use the EPOCH code(developed under UK EPSRC Grants(Nos.EP/G054940/1,EP/G055165/1,and EP/G056803/1)).

    非洲黑人性xxxx精品又粗又长| 天堂√8在线中文| 男女之事视频高清在线观看| 免费在线观看成人毛片| 精品国内亚洲2022精品成人| 亚洲中文字幕日韩| 美女黄网站色视频| 久久午夜亚洲精品久久| 免费在线观看日本一区| 国产精品综合久久久久久久免费| 国产91精品成人一区二区三区| 国产黄色小视频在线观看| а√天堂www在线а√下载| 精品欧美国产一区二区三| 欧美xxxx性猛交bbbb| 极品教师在线视频| 99国产精品一区二区三区| 婷婷精品国产亚洲av在线| 亚州av有码| 日韩欧美精品免费久久 | 日韩欧美精品v在线| 亚洲无线在线观看| 中文字幕精品亚洲无线码一区| 99热精品在线国产| 日韩精品青青久久久久久| 少妇的逼好多水| 欧美成狂野欧美在线观看| 国产综合懂色| 国产精品一区二区性色av| 色吧在线观看| 国产亚洲精品久久久com| 精品久久久久久久久久久久久| 内射极品少妇av片p| 亚洲真实伦在线观看| 久久精品综合一区二区三区| 国产精品美女特级片免费视频播放器| 麻豆一二三区av精品| 一区二区三区高清视频在线| 午夜福利免费观看在线| 欧美黄色淫秽网站| 国内精品一区二区在线观看| 亚洲综合色惰| 高清毛片免费观看视频网站| 人妻丰满熟妇av一区二区三区| 亚洲国产高清在线一区二区三| 中文字幕人成人乱码亚洲影| 亚洲五月天丁香| 色av中文字幕| av天堂中文字幕网| 久久热精品热| 最近视频中文字幕2019在线8| 欧美xxxx性猛交bbbb| 亚洲av中文字字幕乱码综合| 一进一出抽搐gif免费好疼| 深夜精品福利| 性色avwww在线观看| 日本三级黄在线观看| 白带黄色成豆腐渣| 深夜精品福利| 国产中年淑女户外野战色| 成人精品一区二区免费| 少妇人妻一区二区三区视频| 免费搜索国产男女视频| 别揉我奶头 嗯啊视频| 婷婷精品国产亚洲av| 国内揄拍国产精品人妻在线| 免费观看的影片在线观看| 一本精品99久久精品77| 成人毛片a级毛片在线播放| 有码 亚洲区| 欧美日韩福利视频一区二区| 亚洲无线观看免费| 精品国产三级普通话版| 国产亚洲精品久久久com| 久久久精品大字幕| 欧美又色又爽又黄视频| 听说在线观看完整版免费高清| aaaaa片日本免费| 在线播放无遮挡| 国产av在哪里看| 黄色视频,在线免费观看| 桃色一区二区三区在线观看| 婷婷精品国产亚洲av| 乱码一卡2卡4卡精品| 搞女人的毛片| 美女大奶头视频| 亚洲av熟女| 一卡2卡三卡四卡精品乱码亚洲| 国产精品国产高清国产av| 久久精品久久久久久噜噜老黄 | 久久久久亚洲av毛片大全| 九九热线精品视视频播放| 非洲黑人性xxxx精品又粗又长| 色5月婷婷丁香| 亚洲成人精品中文字幕电影| 一区二区三区免费毛片| 免费在线观看日本一区| 日韩欧美精品v在线| 亚洲av熟女| www.熟女人妻精品国产| 亚洲电影在线观看av| 亚洲18禁久久av| 麻豆国产av国片精品| 日日摸夜夜添夜夜添小说| 亚洲 国产 在线| 最近视频中文字幕2019在线8| 首页视频小说图片口味搜索| 国产亚洲精品久久久久久毛片| 欧美黑人欧美精品刺激| 国产视频内射| 国产激情偷乱视频一区二区| 国产亚洲精品综合一区在线观看| 国产亚洲精品综合一区在线观看| 18+在线观看网站| 人妻制服诱惑在线中文字幕| 中文亚洲av片在线观看爽| 午夜福利在线在线| 18禁黄网站禁片免费观看直播| 久久久成人免费电影| 精品久久久久久久久av| 99国产精品一区二区蜜桃av| 给我免费播放毛片高清在线观看| 很黄的视频免费| 黄色丝袜av网址大全| 内射极品少妇av片p| 久久精品国产自在天天线| 国产一区二区三区在线臀色熟女| 他把我摸到了高潮在线观看| 校园春色视频在线观看| 人妻丰满熟妇av一区二区三区| 一个人看的www免费观看视频| 精品久久久久久久久亚洲 | 亚洲片人在线观看| 一个人免费在线观看电影| 欧美一区二区国产精品久久精品| 男人的好看免费观看在线视频| 91麻豆av在线| 人人妻人人看人人澡| 精品一区二区三区人妻视频| 亚洲激情在线av| 亚洲精品影视一区二区三区av| 久久草成人影院| 在线国产一区二区在线| 国产一区二区在线av高清观看| 亚洲国产精品成人综合色| 久久99热6这里只有精品| 欧美高清成人免费视频www| 亚洲中文字幕一区二区三区有码在线看| 精品国产三级普通话版| 日本a在线网址| 国内精品久久久久久久电影| 国内精品久久久久精免费| 网址你懂的国产日韩在线| 丁香欧美五月| 国产精品自产拍在线观看55亚洲| 在现免费观看毛片| 国产精品久久电影中文字幕| 国产亚洲精品av在线| 午夜福利高清视频| 深夜精品福利| 午夜福利在线观看吧| 老司机午夜福利在线观看视频| 99久久99久久久精品蜜桃| 免费在线观看影片大全网站| 91麻豆精品激情在线观看国产| 91久久精品国产一区二区成人| 国产亚洲欧美98| 国产欧美日韩精品一区二区| 欧美三级亚洲精品| 国产伦精品一区二区三区视频9| 一夜夜www| xxxwww97欧美| 国产色婷婷99| 午夜福利在线观看免费完整高清在 | 国产熟女xx| 午夜福利高清视频| 亚洲熟妇中文字幕五十中出| 最后的刺客免费高清国语| 国产精品久久电影中文字幕| 色5月婷婷丁香| 国产av在哪里看| 国产精品日韩av在线免费观看| 亚洲av免费高清在线观看| 一卡2卡三卡四卡精品乱码亚洲| 日韩国内少妇激情av| 日本五十路高清| 色哟哟·www| 97热精品久久久久久| 内地一区二区视频在线| 天天一区二区日本电影三级| 午夜影院日韩av| a级毛片免费高清观看在线播放| av女优亚洲男人天堂| 亚洲在线自拍视频| 欧美区成人在线视频| 91av网一区二区| 听说在线观看完整版免费高清| 少妇人妻精品综合一区二区 | 亚洲第一欧美日韩一区二区三区| 99久久精品国产亚洲精品| 国产精品电影一区二区三区| 国产精品亚洲一级av第二区| 精品国产三级普通话版| 女人十人毛片免费观看3o分钟| 欧美3d第一页| 亚洲国产日韩欧美精品在线观看| 国产乱人视频| 国产高清视频在线观看网站| 免费观看的影片在线观看| 九色国产91popny在线| 在线观看免费视频日本深夜| 国产免费av片在线观看野外av| 色播亚洲综合网| 亚洲欧美精品综合久久99| 日韩精品中文字幕看吧| 午夜福利18| 极品教师在线免费播放| x7x7x7水蜜桃| 在线国产一区二区在线| 日韩欧美国产一区二区入口| www.999成人在线观看| 久久久久九九精品影院| 99久久成人亚洲精品观看| 国产毛片a区久久久久| 国产不卡一卡二| 亚洲av熟女| 成人亚洲精品av一区二区| 欧美日韩瑟瑟在线播放| 色在线成人网| 欧美日韩乱码在线| 欧美国产日韩亚洲一区| 国产精品一区二区三区四区免费观看 | 国产一区二区激情短视频| 国产欧美日韩一区二区精品| 国产在线精品亚洲第一网站| 女同久久另类99精品国产91| 久久精品久久久久久噜噜老黄 | 欧美三级亚洲精品| 亚洲,欧美精品.| 18禁裸乳无遮挡免费网站照片| 99久久成人亚洲精品观看| 在线观看66精品国产| 亚洲美女视频黄频| 嫩草影院入口| 国产久久久一区二区三区| 白带黄色成豆腐渣| 午夜a级毛片| 一区二区三区四区激情视频 | 日日夜夜操网爽| 日韩中文字幕欧美一区二区| 一进一出好大好爽视频| 99riav亚洲国产免费| 级片在线观看| 成年版毛片免费区| 午夜a级毛片| а√天堂www在线а√下载| 欧美3d第一页| 少妇熟女aⅴ在线视频| 97人妻精品一区二区三区麻豆| 久久久精品欧美日韩精品| 中文字幕精品亚洲无线码一区| 99久久精品一区二区三区| 日韩人妻高清精品专区| 色哟哟·www| 无人区码免费观看不卡| 日韩欧美在线乱码| 日本黄色视频三级网站网址| 精品一区二区免费观看| 美女cb高潮喷水在线观看| 99久久成人亚洲精品观看| 国产视频一区二区在线看| 国产私拍福利视频在线观看| 国模一区二区三区四区视频| 色尼玛亚洲综合影院| 动漫黄色视频在线观看| 亚洲av免费在线观看| 久久性视频一级片| 久久久久久久亚洲中文字幕 | 男女之事视频高清在线观看| 如何舔出高潮| 欧美激情国产日韩精品一区| 一级a爱片免费观看的视频| 日本a在线网址| 亚洲人成网站在线播| 看十八女毛片水多多多| 九九久久精品国产亚洲av麻豆| 亚洲精品影视一区二区三区av| 一卡2卡三卡四卡精品乱码亚洲| 女同久久另类99精品国产91| 亚洲国产欧洲综合997久久,| 热99re8久久精品国产| 久久久久免费精品人妻一区二区| 亚洲成人精品中文字幕电影| 观看美女的网站| 最新在线观看一区二区三区| 欧美精品啪啪一区二区三区| 热99在线观看视频| 国模一区二区三区四区视频| 别揉我奶头 嗯啊视频| 精品不卡国产一区二区三区| 美女黄网站色视频| 精品一区二区三区视频在线| 天堂av国产一区二区熟女人妻| 神马国产精品三级电影在线观看| 乱人视频在线观看| 亚洲精品456在线播放app | 国产精品1区2区在线观看.| 亚洲片人在线观看| 日韩高清综合在线| 脱女人内裤的视频| 国产精品影院久久| 天美传媒精品一区二区| 亚洲人成伊人成综合网2020| 亚洲,欧美,日韩| 无遮挡黄片免费观看| 亚洲av熟女| 欧美极品一区二区三区四区| 一级黄色大片毛片| 哪里可以看免费的av片| 中文字幕精品亚洲无线码一区| 很黄的视频免费| 99国产精品一区二区三区| 精品一区二区免费观看| 色精品久久人妻99蜜桃| av在线老鸭窝| 亚洲精品亚洲一区二区| 免费观看人在逋| 国产成人啪精品午夜网站| 三级男女做爰猛烈吃奶摸视频| 天堂动漫精品| 狂野欧美白嫩少妇大欣赏| 好看av亚洲va欧美ⅴa在| 男人舔女人下体高潮全视频| 99riav亚洲国产免费| 精品久久久久久久人妻蜜臀av| 日本与韩国留学比较| 两个人视频免费观看高清| 国产高清三级在线| 大型黄色视频在线免费观看| 午夜亚洲福利在线播放| 丰满人妻熟妇乱又伦精品不卡| 两个人的视频大全免费| 深爱激情五月婷婷| 亚洲国产精品久久男人天堂| 国产高清视频在线播放一区| 日本免费a在线| 久久国产精品人妻蜜桃| 嫩草影视91久久| 久久6这里有精品| 国产综合懂色| 久久欧美精品欧美久久欧美| 女人十人毛片免费观看3o分钟| 又黄又爽又刺激的免费视频.| 99国产极品粉嫩在线观看| 国产精品久久久久久人妻精品电影| 久久国产精品人妻蜜桃| 神马国产精品三级电影在线观看| 中亚洲国语对白在线视频| 丁香六月欧美| 亚洲片人在线观看| 欧美xxxx性猛交bbbb| 国产毛片a区久久久久| 一二三四社区在线视频社区8| 国产精品亚洲av一区麻豆| 日本黄色视频三级网站网址| 国产精品自产拍在线观看55亚洲| 日本三级黄在线观看| 日韩人妻高清精品专区| 91久久精品国产一区二区成人| 中文字幕久久专区| 国产一区二区在线观看日韩| 国产真实乱freesex| 黄色配什么色好看| 精品乱码久久久久久99久播| 美女 人体艺术 gogo| 网址你懂的国产日韩在线| 黄片小视频在线播放| 成年免费大片在线观看| 久久国产精品影院| or卡值多少钱| av黄色大香蕉| 神马国产精品三级电影在线观看| 俺也久久电影网| 久久久久久久久久成人| 91麻豆精品激情在线观看国产| 97超级碰碰碰精品色视频在线观看| 免费无遮挡裸体视频| or卡值多少钱| 国产大屁股一区二区在线视频| 久久久久亚洲av毛片大全| 国产精华一区二区三区| 日韩国内少妇激情av| 精品久久国产蜜桃| 欧美高清性xxxxhd video| 欧美日韩黄片免| а√天堂www在线а√下载| 高潮久久久久久久久久久不卡| 97人妻精品一区二区三区麻豆| 国产淫片久久久久久久久 | www日本黄色视频网| 99精品久久久久人妻精品| 婷婷亚洲欧美| 淫秽高清视频在线观看| 天堂影院成人在线观看| 国产男靠女视频免费网站| 午夜精品在线福利| 成人国产综合亚洲| a级毛片a级免费在线| 亚洲精品乱码久久久v下载方式| 亚洲专区中文字幕在线| 午夜福利在线观看吧| 韩国av一区二区三区四区| www.999成人在线观看| 色综合欧美亚洲国产小说| 人人妻,人人澡人人爽秒播| 美女cb高潮喷水在线观看| 人妻制服诱惑在线中文字幕| 欧美日韩中文字幕国产精品一区二区三区| 精品99又大又爽又粗少妇毛片 | ponron亚洲| 在线观看午夜福利视频| 亚洲一区二区三区不卡视频| 久久人人爽人人爽人人片va | 国产老妇女一区| 免费观看人在逋| 美女被艹到高潮喷水动态| 亚洲美女视频黄频| 97超级碰碰碰精品色视频在线观看| 999久久久精品免费观看国产| 欧美在线一区亚洲| 少妇的逼水好多| 深夜精品福利| 亚洲avbb在线观看| 国产av在哪里看| 成年人黄色毛片网站| 国产精品1区2区在线观看.| 欧美性感艳星| 美女被艹到高潮喷水动态| 久久精品夜夜夜夜夜久久蜜豆| 热99re8久久精品国产| 欧美三级亚洲精品| 夜夜爽天天搞| 国产精品不卡视频一区二区 | 脱女人内裤的视频| 国产蜜桃级精品一区二区三区| 国产精品久久久久久久久免 | 亚洲狠狠婷婷综合久久图片| 国产在视频线在精品| 亚洲成人精品中文字幕电影| 精品人妻熟女av久视频| 国产毛片a区久久久久| 国产不卡一卡二| 精品熟女少妇八av免费久了| 亚洲va日本ⅴa欧美va伊人久久| 日本黄色视频三级网站网址| 女生性感内裤真人,穿戴方法视频| 精品久久久久久成人av| 最好的美女福利视频网| 别揉我奶头~嗯~啊~动态视频| 中文亚洲av片在线观看爽| av在线天堂中文字幕| 乱码一卡2卡4卡精品| 五月伊人婷婷丁香| 最新在线观看一区二区三区| 午夜两性在线视频| 国产高清有码在线观看视频| 欧美高清成人免费视频www| 黄片小视频在线播放| 精品99又大又爽又粗少妇毛片 | 日本五十路高清| 99在线视频只有这里精品首页| 99国产精品一区二区三区| 色综合站精品国产| 怎么达到女性高潮| 久久亚洲精品不卡| 国产v大片淫在线免费观看| 亚洲精品在线观看二区| 99精品久久久久人妻精品| 久久精品91蜜桃| 久久久久国内视频| 亚洲av二区三区四区| 午夜亚洲福利在线播放| 99久久99久久久精品蜜桃| 色哟哟·www| 久久久久久久亚洲中文字幕 | 亚洲美女搞黄在线观看 | 老师上课跳d突然被开到最大视频 久久午夜综合久久蜜桃 | 精品久久久久久久久av| 亚洲av成人精品一区久久| 男女做爰动态图高潮gif福利片| 国产成人欧美在线观看| 国产乱人视频| 1024手机看黄色片| 99视频精品全部免费 在线| 久久亚洲真实| 伊人久久精品亚洲午夜| 少妇裸体淫交视频免费看高清| 波多野结衣巨乳人妻| 哪里可以看免费的av片| 国产色婷婷99| 丰满人妻一区二区三区视频av| 久久伊人香网站| 一区福利在线观看| 特大巨黑吊av在线直播| 村上凉子中文字幕在线| 中文字幕精品亚洲无线码一区| 日韩免费av在线播放| 欧美色视频一区免费| 亚洲中文字幕一区二区三区有码在线看| 久久午夜福利片| 国产乱人伦免费视频| 91久久精品国产一区二区成人| 国产精品乱码一区二三区的特点| 极品教师在线免费播放| 国产精品人妻久久久久久| a级毛片a级免费在线| 精品久久久久久久人妻蜜臀av| 亚洲内射少妇av| 亚洲在线自拍视频| 国产成年人精品一区二区| 国产大屁股一区二区在线视频| 丰满的人妻完整版| 欧美国产日韩亚洲一区| 黄色女人牲交| 久久精品国产亚洲av天美| 精品国产三级普通话版| 亚洲av不卡在线观看| 精品久久久久久久久亚洲 | 国产精品久久久久久久久免 | 嫩草影院新地址| 亚洲欧美日韩东京热| 午夜亚洲福利在线播放| 国产精品亚洲美女久久久| 美女xxoo啪啪120秒动态图 | 午夜福利免费观看在线| 欧美潮喷喷水| 女生性感内裤真人,穿戴方法视频| 人妻丰满熟妇av一区二区三区| 欧美精品国产亚洲| 国产大屁股一区二区在线视频| 精品一区二区免费观看| 日韩欧美国产在线观看| 99久久精品热视频| 精品久久久久久成人av| 中文字幕人成人乱码亚洲影| 中文字幕免费在线视频6| 男女下面进入的视频免费午夜| 99久国产av精品| 男女下面进入的视频免费午夜| 免费黄网站久久成人精品 | 国产精品亚洲av一区麻豆| 97人妻精品一区二区三区麻豆| 久久精品国产99精品国产亚洲性色| 日本五十路高清| 国产69精品久久久久777片| 亚洲国产精品999在线| 亚洲成a人片在线一区二区| 久久国产乱子免费精品| 99久国产av精品| 午夜福利欧美成人| 亚洲久久久久久中文字幕| 一a级毛片在线观看| 国产久久久一区二区三区| 一进一出好大好爽视频| 男女那种视频在线观看| 亚洲国产欧洲综合997久久,| 亚洲三级黄色毛片| 变态另类丝袜制服| 午夜免费男女啪啪视频观看 | 少妇高潮的动态图| 性插视频无遮挡在线免费观看| 九九在线视频观看精品| 一本一本综合久久| 日韩免费av在线播放| aaaaa片日本免费| 精品久久久久久,| 亚洲男人的天堂狠狠| 我的女老师完整版在线观看| 亚洲不卡免费看| 国产精品免费一区二区三区在线| 精品久久久久久久久久免费视频| 久久精品影院6| 91在线观看av| 亚洲欧美日韩卡通动漫| 99国产精品一区二区三区| 色播亚洲综合网| 欧美日韩综合久久久久久 | 国产欧美日韩一区二区三| 国产成人a区在线观看| 麻豆国产97在线/欧美| 色综合婷婷激情| 搡老妇女老女人老熟妇| 国产黄片美女视频| 精品久久久久久久末码| 亚洲成人免费电影在线观看| 精品欧美国产一区二区三| 97碰自拍视频| 精品午夜福利视频在线观看一区| 久久这里只有精品中国| 日本一本二区三区精品| 丰满乱子伦码专区| 亚洲va日本ⅴa欧美va伊人久久| 99久久无色码亚洲精品果冻| 日韩中文字幕欧美一区二区| 简卡轻食公司| 久久国产乱子伦精品免费另类| 免费黄网站久久成人精品 | 啦啦啦观看免费观看视频高清| 久久久精品欧美日韩精品| 久久久久国产精品人妻aⅴ院| 亚洲成av人片免费观看| 久久欧美精品欧美久久欧美| 成熟少妇高潮喷水视频| 亚州av有码| 欧美高清成人免费视频www|