• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Analysis on Plastic Responses of Metal Foam Sandwich Beams under Low Velocity Repeated Impacts

    2023-12-19 08:13:30-,-,,-
    船舶力學(xué) 2023年12期

    -,-,,-

    (1.Key Laboratory of High Performance Ship Technology(Wuhan University of Technology),Ministry of Education, Wuhan 430063, China; 2.School of Naval Architecture, Ocean and Energy Power Engineering, Wuhan 430063, China; 3.Key Laboratory of Impact and Safety Engineering,Ministry of Education,Ningbo University,Ningbo 315211,China)

    Abstract:This paper presents the repeated impact tests of a metal foam sandwich beam(MFSB)by using INSTRON 9350 drop tower and analysis of the deformation and energy absorption performance of the MFSB.Based on the rigid-plastic assumption, the theoretical model is established to analyze the plastic mechanical behavior of an MFSB suffering from repeated low velocity impacts, in which the bounds of dynamic solution of permanent deflection are derived.The theoretical predictions are compared with the results of impact tests.Results show that the displacement of the sandwich beam is linearly distributed, and the deflection increases with the impact number, while the increment declines.With the increase of the impact number, the plastic deformation energy produced in each impact decreases while the rebound energy increases.The permanent deflections predicted by theoretical solutions agree well with those obtained from the impact tests, confirming that the theoretical model is capable of predicting the plastic responses of MFSBs subjected to repeated impacts.The proposed analytical model can provide theoretical references and technical supports for the design of the MFSBs under repeated impact loadings.

    Key words:metal foam sandwich beam;repeated impact;plastic response;impact test;theoretical analysis

    0 Introduction

    When marine structures are subjected to repeated impact loadings during navigation and operation, such as from supplying ships, dropped objects, floe ice and so on, the deformation and damage will accumulate, resulting in failure and damage of the structures, even causing serious accidents[1].Hence, it is critical to study the dynamic behavior of marine structures under repeated impacts.

    Attention was paid to the problem on repeated collisions of ships by Zhu[2]first in 1990,the dynamic responses of ship plates suffering from repeated impacts with a rigid mass were investigated by theoretical analysis, numerical simulation and impact tests.In Zhu's study, the numerical program was developed based on finite deference method to predict the permanent deflection of ship plates.To further study the dynamic behavior of ship plates subjected to repeated impacts, the repeated collision tests on rectangular plates with fixed boundary were conducted,and the correlation between permanent deflections and impact number was obtained[3].Afterwards,the theoretical model based on rigid-plastic assumption was established to analyze dynamic plastic mechanism of rectangular plates under repeated impacts, and the theoretical formula of permanent deflections were derived.In recent years,a series of works were carried out by Zhu and his co-workers[4-7]on the dynamic responses of ship plates suffering from repeated impact loadings.Firstly, a theoretical analysis was performed to study the plastic behavior of ship plating subjected to repeated impacts from floe ices,and the expressions were obtained to predict the permanent deflections.Then,the mechanism of damage accumulation of stiffened plates under repeated impacts was investigated experimentally and theoretically, and the correlation of stiffness, rebound velocity and elastic energy etc.with impact number were revealed.

    As a new type of lightweight material, metal foam has excellent mechanical properties, and its sandwich structure has structural and mechanical advantages[8-9].As protective structures, metal foam sandwich structures possess potential applications in the field of naval and ocean engineering for improving their load-carrying capacity,impact protection and structural integrity.

    Recently, some researches have been studying the dynamic behavior of MFSBs under single impact loadings[10-12].The experimental investigation was performed by Jing et al[13]to study the dynamic responses of a metal foam sandwich beam suffering from impact of aluminum foam bullet.In that work,high speed camera was used to record the impact process,and the deformation mode and failure mode of the sandwich beam were discussed.In order to determine the dynamic responses of metal foam sandwich beams subjected to blast loadings, a rigid plastic theoretical model was proposed by Qin[14]based on rigid,perfect plastic assumption,and the analytical formula of dimensionless deflection were derived.In addition,the bounds solutions of the permanent deflection were also adopted based on the circumscribing and inscribing yield locus.Afterwards, the theoretical model on metal foam sandwich beams suffering from low velocity mass impact was given, in which the results obtained from quasi-static and dynamic analysis were compared[15].

    Numerous studies have been published on the mechanical behavior of metal foam sandwich beams under impact loadings, while little attention has been paid to the structural response under repeated impacts.The mechanism of deformation accumulation and energy dissipation of metal foam sandwich structures have remained unrevealed.In this paper, to examine the dynamic plastic responses of metal foam sandwich beam subjected to repeated low velocity impacts,the repeated impact tests on MFSBs were first performed using INSTRON 9350 drop tower.Then,a theoretical analytical model was established based on rigid plastic assumption.In the theoretical model,the bounds solutions of the deflection were derived using the circumscribing and inscribing yield locus.Finally,the theoretical model was verified by comparing the permanent deflections with those obtained from the impact tests.

    1 Experimental study

    1.1 Experimental setup

    The repeated impact tests were performed by using INSTRON 9350 drop tower, as shown in Fig.1.Since the top of the additional mass frame was connected with a spring acceleration system,the initial impact velocity could be larger than that of free drop,and the maximum velocity could reach 24 m/s.

    As seen from Fig.2, the MFSB was clamped at two ends with bolts to provide a fixed boundary.As shown in Fig.3, the impactor with a wedge nose was connected to a force transducer which had a maximum capacity of 90 kN,and the sampling frequency was 500 kHz.During the impact test, all the data were transferred from the force transducer by a data acquisition system (DAS 64K).Thus, the time history of velocity could be converted from the time history of impact force.

    The MFSB was composed of front face sheet,back face sheet and an aluminium foam core,and the face sheets and core were glued by epoxy resin.Thicknesses of the face sheets and core weret=1 mm andc=10 mm,respectively.The span of the sandwich beam wasLS=150 mm,and the width of beam wasB=30 mm.In the repeated impact tests of the MFSB, the impact mass was 7.884 kg,the initial impact velocity was 2.12 m/s,so the impact energy was 17.8 J.

    Fig.3 Dimensions of impactor

    1.2 Experimental results

    In this study,the bolts were used to constrain the ends of the sandwich beam.The deformation profile of the MFSB in the 10th impact is presented to discuss the deformation mode of the beam under repeated impact tests, as plotted in Fig.4.It can be found that when suffering low velocity impact,plastic hinges formed at the middle span and the boundary of the sandwich beam,and the deformation was almost linearly distributed from the middle span to the two ends.The external impact energy was mainly consumed by the plastic moment and axial force,in the form of plastic hinge rotation and axial elongation.

    Fig.4 Deformation profile of MFSB

    The impact test was repeated with same energy of 17.8 J, neither the face sheet nor the metal foam core experienced fracture in the first 10 impacts.As the impact number increased, the absorbed energy increased, leading to the deformation of the MFSB being enlarged gradually, as shown in Fig.5.During the repeated impacts, for all impacts, the deformation profile of the MFSB exhibited symmetry, the displacement approximately exhibited linear distribution, and the plastic hinges were located at the middle span and the fixed ends.Thus, the relevant assumptions on the deformation mode and energy consumption can be proposed in the theoretical model for low velocity repeated impacts.

    Fig.5 Deformation profile of MFSB under repeated impacts

    The time history of impact force of MFSB is plotted in Fig.6, from which it can be found the peak value of impact force increased with the impact number, and the duration time of the impact decreased.

    As illustrated in Fig.7,the impact velocity increased with the increase of impact time,once its value declined to be zero, the impact velocity increased in the opposite direction till the impactor was separated from the surface of the MFSB.As the impact number increased,the rebound velocity increased gradually.

    Fig.6 Time history of impact force of MFSB

    Fig.7 Time history of impact velocity of MFSB

    During the repeated impacts, the absorbed energy would accumulate with the increase of impact number.As shown in Fig.8, as the impact number increased, the permanent deflections of the face sheets increased,while the increment declined.

    Fig.8 Permanent deflection of MFSB

    The energy consumed by the MFSB could be divided into two major parts,i.e.plastic deformation energy and elastic deformation energy.One part of the elastic deformation energy would be released and transferred into the kinetic energy of the impactor in the form of rebound velocity while the other part would be represented as elastic vibration of the sandwich beam.The time history of strain energy of the sandwich beam could be obtained from numerical simulation results in Ref.[16], as presented in Fig.9.It is seen from this figure that after the impactor separated from the front face of the sandwich beam, the strain energy dropped but remained as constant,with almost no oscillation observed,indicating that the elastic vibration of the sandwich was very small and negligible.Thus, we could assume that the elastic energy stored in the sandwich beam in each impact would be entirely transferred into the rebounding kinetic energy of the impactor.In this paper,the ratio of the absorbed energy to the initial impact energy was defined as‘energy absorption coefficient’,and the square root of the ratio of rebounding energy to the initial impact energy was defined as‘energetic coefficient of restitution’.The‘energetic coefficient of restitution’could be expressed by Eq.(1)[17-18].

    Fig.9 Time history curves of strain energy of sandwich beam obtained from numerical simulations[16]

    Guo et al[19-20]performed experimental and numerical studies on the dynamic responses of metal foam sandwich plates under repeated impact loadings.It is found that as the impact number increases, the loading stiffness of the metal foam sandwich structures increases, and the elastic strain energy increases,resulting in the increase of the rebounding effect of the sandwich structures,while its increment declines.This phenomenon also occurs on the metal foam sandwich beam under repeated impacts in this paper.The rebound velocity is provided in Tab.1,and the energetic coefficientof restitutionercan be calculated by Eq.(1), then the energy absorption coefficienteican be gained by Eq.(2a).

    Tab.1 Dynamic responses of MFSB under repeated impacts

    Tab.1 (Continued)

    As shown in Fig.10,according to its trend,the curve of the energy absorption coefficient vs.the impact number can be divided into two parts.As the impact number increases, the energy absorption efficient and its increment decrease, but approach constant values.In order to make a more accurate description of the relationship between the energy absorption coefficient and the impact number,fitting formula were derived,as given by Eq.(2b).

    Fig.10 Correlation between energy absorption with impact number

    2 Theoretical analysis

    2.1 Unified yield criterion for sandwich structures

    When structures are subjected to intensive external loadings, the plastic deformation will occur,in the form of plastic bending and/or axial stretching.Therefore,both effects of the bending and stretching should be taken into account during the adoption of yield criteria.A sandwich beam consists of two front faces, core material and two rear faces, the stress states are much more complicated than those of a solid beam.According to the principle of force superposition, however, the stress of a sandwich beam can be decomposed into pure bending and uniaxial tension.The deformation profile of the MFSB measured from impact test is plotted in Fig.11.

    The thicknesses of face sheet and core aretandc,the width of the beam isb,the distance between the neutral axis and the bottom of rear face ish.The yield stress of face sheet isσf,while the yield stress of metal foam core isσc.Meanwhile,MandNdenote the bending moment and axial force,respectively,andMPandNPare the fully plastic bending moment and fully plastic axial force,respectively.Assumingξ=h/(c+ 2t),and then the stress state of the sandwich structure can be divided into two cases,according to the location of neutral axis,as shown in Fig.12.

    Fig.11 Deformation profile of MFSB measured from impact test

    Thus,the plastic yield bending moment and plastic yield axial force can be expressed as following:

    To simplify the calculation, the stress and thickness are non-dimensionalized.By definingσˉ=σc/σfandtˉ=t/c,it can be obtained that

    From Eqs.(3)-(8),we obtain

    Combining Eqs.(12)and(13),yield criteria can be rewritten as

    Fig.13 Yield surface of the rectangular sandwich core-section

    The yield surface of the rectangular sandwich core-section is shown in Fig.13.

    2.2 Bounds of solutions

    Therefore,square yield surface of the sandwich core-section can be depicted in Fig.14.

    Fig.14 Square yield surface of the sandwich core-section

    As for a sandwich beam with fixed ends, if only the plastic bending moment consumes energy,the plastic energy dissipation rate can be expressed as

    Similarly,the dimensionless permanent deflection based on the inscribing yield surface can be expressed as

    For repeated impacts,the deformation of the previous impact should be taken into account,i.e.the last status of stress and deformation after the previous impact serves as the initial status of the immediate next impact.Based on energy accumulation law,the expressions of dimensionless permanent deflection can be derived as following:

    2.3 Validation for the theoretical model

    As for a mild steel plate,the yield stress in the theoretical model is assumed to be the approximate value between the initial yield stress and ultimate strength,and expressed as

    While for metal foam core,the yield stress is assumed to be the plateau stress,i.e.

    In order to verify the validity of the theoretical model proposed above, the material properties and geometric parameters are taken as the same with the impact tests.What's more, the boundary condition,impact mass and impact velocity etc.also remain the same as the impact tests.Hence,in the verifying test of the theoretical model, the impact mass is 7.884 kg, the impact velocity is 2.12 m/s, and the impact energy is 17.8 J.The geometric parameters and material properties as well as dimensionless parameters of the metal foam sandwich beam are summarized in Tab.2.

    Tab.2 Parameters used in the verifying test of the theoretical model

    The dimensionless deflection of the MFSB in different impact numbers obtained from different methods is presented in Tab.3.

    Tab.3 Dimensionless deflection of MFSB in different impact numbers

    It can be seen from Fig.15 that when the impact number is below 8,the difference of deflection between the theoretical prediction and the real impact test is within 10%.While as the impact number increases,the elastic effect of the sandwich beam is enhanced,thus the difference increases rapidly.For example, when the impact number is 10, the difference would reach 17%, which is relatively large and cannot be accepted.Thus,it can be concluded that when the impact number is larger than a specific value,the elastic effect of the sandwich beam cannot be neglected.

    In order to enhance the accuracy of the results,the influence of elastic energy is considered in conjunction with the energy absorption coefficient obtained from impact tests.When considering the effect of rebound,the absorbed energy is calculated approximately as the difference between total energy and the stored elastic energy,then the plastically dissipated energy can be expressed as

    The correlation between energy absorption coefficient and impact number can be gained from repeated impact tests,which is illustrated in Eq.(2).

    Fig.15 Correlation between dimensionless deflection and impact number

    Fig.16 Correlation between dimensionless deflection and impact number considering rebound effect

    As depicted in Fig.16, regarding the dimensionless deflections, when considering the rebound effect, the theoretical prediction are very close to the real impact tests.The dimensionless deflections of impact tests lie between the results obtained from the inscribing yield surface and the circumscribing yield surface whilst the average value obtained from these two square yield surfaces almost coincides with the result of impact tests.It can be concluded that, the corrected theoretical model is accurate enough in predicting the permanent deflections of the metal foam sandwich beam suffering from repeated impacts with rigid mass.

    However, this theoretical model has made some assumptions, which would be responsible to the differences between the theoretical analysis and the experiments.One factor is the friction,which consumes energy in the impact tests, while the theoretical model does not take it into account.The second factor is the strain hardening, which the material of face sheet would experience during impact tests as the deflection increases, while in the theoretical model, the yield stress of face sheet is taken as the average of initial yield stress and ultimate strength.Thus,when the deflection is small, the yield stress of theoretical model would be larger than real one, but it would be smaller when the deflection is larger.

    Based on the aforementioned analysis and comparison, it is confirmed that the prediction of the theoretical model agrees well with those of experiments,verifying that the theoretical model proposed in this paper is sufficiently accurate in analyzing the large dynamic deflections of metal foam sandwich beams under repeated impacts.

    To be exact, the proposed theoretical method in this study also has its limitation.The rebound effect of the sandwich beam is obtained from the impact tests, while the elastic energy of the sandwich beam is related to the geometric and material parameters.That is to say, without performing appropriate repeated impact tests, the rebound effect cannot be predicated accurately.Thus, in future studies,in order to improve the accuracy of the theoretical predictions,the elastic energy of the beam can be evaluated by conducting a systematic numerical simulations[21].The equation to predict the rebound effect of the sandwich beam can be empirically derived by a regression analysis of the numerical results,in which the impact energy,geometric and material parameters can be taken into account.

    3 Conclusions

    The dynamic deformation behavior of a metal foam core sandwich beam suffering from repeated impacts was experimentally and theoretically investigated in this paper.The repeated impact tests of MFSB were conducted by using INSTRON 9350 drop tower,the time history of impact force and velocity were obtained and discussed, and the plastic energy absorption and rebound effect were examined.Then,a complete theoretical model was proposed based on the rigid plastic assumption, in which the rebound effect was considered, while the bounds of solutions were derived.Some conclusions can be drawn as follows:

    (1)When suffering from repeated low velocity impacts,the displacement of the sandwich beam is distributed in a linear form from the middle span to the two ends, and the deflection increases with the impact number, while the increment declines.The external impact energy is mainly consumed by plastic hinge rotation and axial elongation.As the impact number increases, the plastic energy dissipation in each impact decreases.By comparison, the rebound energy increases with the impact number, indicating the rebound effect gradually becomes more important during repeated impacts.

    (2) The influence of rebound effect can be determined by using the rebound coefficient obtained from impact tests to modify the results of the theoretical analysis.The permanent deflections predicted by the theoretical model agree well with the impact tests,indicating the theoretical model proposed can be used to predict the dynamic response with a good accuracy.Furthermore, to enhance the practical significance of the proposed method,further study should be conducted to evaluate the rebound effect of sandwich beams by numerical simulations in addition to impact tests.

    久久香蕉国产精品| 欧美+亚洲+日韩+国产| 亚洲国产精品久久男人天堂| 国产日本99.免费观看| 麻豆一二三区av精品| 欧美精品啪啪一区二区三区| 国产精品一区二区精品视频观看| 欧美一级a爱片免费观看看 | 真人一进一出gif抽搐免费| x7x7x7水蜜桃| 国产激情久久老熟女| 在线国产一区二区在线| 天天一区二区日本电影三级| 久久香蕉精品热| 欧美精品啪啪一区二区三区| 欧美三级亚洲精品| 亚洲全国av大片| 午夜两性在线视频| 成人三级黄色视频| 丝袜在线中文字幕| 国产一区在线观看成人免费| 天堂√8在线中文| 亚洲精品色激情综合| 国产精品爽爽va在线观看网站 | 国产高清有码在线观看视频 | 黄色女人牲交| 啦啦啦免费观看视频1| 男人舔女人下体高潮全视频| 他把我摸到了高潮在线观看| 香蕉丝袜av| 好男人在线观看高清免费视频 | 亚洲专区国产一区二区| 国产亚洲av高清不卡| 亚洲成人久久性| 亚洲全国av大片| 国产午夜福利久久久久久| 成年版毛片免费区| 亚洲三区欧美一区| www.自偷自拍.com| 午夜福利欧美成人| 国产又色又爽无遮挡免费看| 一个人免费在线观看的高清视频| 女警被强在线播放| 久久国产亚洲av麻豆专区| 亚洲一区二区三区色噜噜| 国产精品免费一区二区三区在线| 人成视频在线观看免费观看| 亚洲一区高清亚洲精品| 91在线观看av| av中文乱码字幕在线| 精品久久久久久久毛片微露脸| 嫩草影院精品99| 国产伦人伦偷精品视频| 亚洲成a人片在线一区二区| 免费在线观看日本一区| 亚洲国产高清在线一区二区三 | 国产日本99.免费观看| 在线国产一区二区在线| 亚洲精品在线观看二区| 久久久久久久午夜电影| 别揉我奶头~嗯~啊~动态视频| 久久午夜综合久久蜜桃| 夜夜看夜夜爽夜夜摸| 91麻豆精品激情在线观看国产| 日韩高清综合在线| 国产又黄又爽又无遮挡在线| 亚洲成人免费电影在线观看| 亚洲男人天堂网一区| 国产色视频综合| 黄色a级毛片大全视频| 色哟哟哟哟哟哟| 国产av不卡久久| 久9热在线精品视频| 欧美最黄视频在线播放免费| 少妇粗大呻吟视频| 国产三级黄色录像| 美女 人体艺术 gogo| 一级毛片高清免费大全| 欧美+亚洲+日韩+国产| 国产一区二区三区在线臀色熟女| 亚洲成a人片在线一区二区| 亚洲专区字幕在线| 欧美av亚洲av综合av国产av| 中文字幕另类日韩欧美亚洲嫩草| 久久久久国产一级毛片高清牌| 免费在线观看视频国产中文字幕亚洲| 无遮挡黄片免费观看| 久久中文字幕人妻熟女| 99久久综合精品五月天人人| 成年版毛片免费区| 国产私拍福利视频在线观看| 男人操女人黄网站| 免费一级毛片在线播放高清视频| 神马国产精品三级电影在线观看 | 国产亚洲欧美98| 久久久久免费精品人妻一区二区 | 中文字幕人妻熟女乱码| 色综合婷婷激情| 99国产极品粉嫩在线观看| 免费看美女性在线毛片视频| 精品午夜福利视频在线观看一区| 亚洲一区中文字幕在线| 久热这里只有精品99| 18美女黄网站色大片免费观看| 精品久久久久久久久久久久久 | 色播亚洲综合网| 国产人伦9x9x在线观看| 亚洲三区欧美一区| 亚洲熟妇中文字幕五十中出| 国产精品美女特级片免费视频播放器 | 欧美性猛交黑人性爽| 夜夜夜夜夜久久久久| 亚洲最大成人中文| 在线观看一区二区三区| 亚洲国产中文字幕在线视频| 日日摸夜夜添夜夜添小说| 午夜视频精品福利| 亚洲无线在线观看| 欧美中文日本在线观看视频| 国语自产精品视频在线第100页| 国产精品久久久久久精品电影 | 亚洲 国产 在线| 美女高潮到喷水免费观看| 很黄的视频免费| 日本熟妇午夜| 日韩欧美一区二区三区在线观看| 制服诱惑二区| 午夜日韩欧美国产| 国产又爽黄色视频| 日韩大码丰满熟妇| 我的亚洲天堂| 久久久久亚洲av毛片大全| 国内毛片毛片毛片毛片毛片| 中出人妻视频一区二区| 亚洲自偷自拍图片 自拍| 欧美av亚洲av综合av国产av| 国产精品 国内视频| 国产精品一区二区免费欧美| 亚洲全国av大片| 少妇裸体淫交视频免费看高清 | 国产激情偷乱视频一区二区| 亚洲真实伦在线观看| 国产一区二区三区在线臀色熟女| 老司机午夜十八禁免费视频| 无限看片的www在线观看| 日韩精品免费视频一区二区三区| 欧美成人一区二区免费高清观看 | 制服人妻中文乱码| 亚洲精品在线美女| 亚洲男人天堂网一区| 91国产中文字幕| 高潮久久久久久久久久久不卡| 精品电影一区二区在线| 制服丝袜大香蕉在线| 国产精品亚洲av一区麻豆| 天天一区二区日本电影三级| 久久精品夜夜夜夜夜久久蜜豆 | 国产麻豆成人av免费视频| 不卡av一区二区三区| 国内揄拍国产精品人妻在线 | 在线观看66精品国产| 天堂√8在线中文| 最新在线观看一区二区三区| 侵犯人妻中文字幕一二三四区| 十八禁网站免费在线| 夜夜夜夜夜久久久久| 亚洲午夜精品一区,二区,三区| 国产一卡二卡三卡精品| 无人区码免费观看不卡| 手机成人av网站| 黄片小视频在线播放| 制服诱惑二区| 91九色精品人成在线观看| 久热这里只有精品99| 好男人在线观看高清免费视频 | 1024视频免费在线观看| 久久国产精品人妻蜜桃| 嫩草影视91久久| 欧美成人性av电影在线观看| 国内久久婷婷六月综合欲色啪| 身体一侧抽搐| 国产伦人伦偷精品视频| 亚洲人成网站高清观看| 2021天堂中文幕一二区在线观 | 成人国产一区最新在线观看| 成人午夜高清在线视频 | 精品国产乱码久久久久久男人| 午夜福利成人在线免费观看| 麻豆久久精品国产亚洲av| 丝袜美腿诱惑在线| 色尼玛亚洲综合影院| 日韩欧美 国产精品| 国产精品自产拍在线观看55亚洲| 成熟少妇高潮喷水视频| 久久国产精品影院| 国产精品九九99| 国产精品亚洲av一区麻豆| 在线观看66精品国产| 国产一区二区在线av高清观看| 国产亚洲欧美98| 欧美日韩瑟瑟在线播放| 一二三四社区在线视频社区8| 国产极品粉嫩免费观看在线| 又黄又爽又免费观看的视频| 亚洲久久久国产精品| 精品无人区乱码1区二区| 天天一区二区日本电影三级| 岛国视频午夜一区免费看| 亚洲一区高清亚洲精品| 亚洲国产高清在线一区二区三 | 99精品在免费线老司机午夜| 18禁黄网站禁片免费观看直播| 国产精华一区二区三区| 美国免费a级毛片| 香蕉av资源在线| 久久这里只有精品19| 亚洲国产精品合色在线| 亚洲精品美女久久久久99蜜臀| 欧美黄色淫秽网站| 老熟妇乱子伦视频在线观看| 久久精品影院6| 色av中文字幕| 黄色 视频免费看| 51午夜福利影视在线观看| 久久热在线av| 一级a爱片免费观看的视频| 久久久国产成人免费| 女性被躁到高潮视频| 欧美激情极品国产一区二区三区| 午夜福利成人在线免费观看| 久久久久久人人人人人| 麻豆av在线久日| 国产熟女xx| 国产精品二区激情视频| 成人三级做爰电影| 嫩草影视91久久| 日韩高清综合在线| 超碰成人久久| 国产亚洲欧美在线一区二区| 国产人伦9x9x在线观看| 亚洲国产毛片av蜜桃av| 麻豆成人午夜福利视频| 久热爱精品视频在线9| 欧美性猛交╳xxx乱大交人| 亚洲欧洲精品一区二区精品久久久| 午夜影院日韩av| 国产av又大| 欧美日韩精品网址| 露出奶头的视频| 国产片内射在线| 亚洲国产精品sss在线观看| 国产真实乱freesex| 又黄又爽又免费观看的视频| 亚洲狠狠婷婷综合久久图片| 国产aⅴ精品一区二区三区波| 91成人精品电影| 久久九九热精品免费| 手机成人av网站| 国产精品自产拍在线观看55亚洲| 大型av网站在线播放| 久久久久久久久中文| 99热只有精品国产| 国产激情久久老熟女| 亚洲av成人不卡在线观看播放网| 啦啦啦 在线观看视频| 69av精品久久久久久| 人人妻,人人澡人人爽秒播| 亚洲精品美女久久av网站| 国产精品久久视频播放| netflix在线观看网站| 亚洲精品国产区一区二| 久久精品国产清高在天天线| 最近最新免费中文字幕在线| 国产片内射在线| 欧美日韩黄片免| 女性生殖器流出的白浆| 日韩一卡2卡3卡4卡2021年| 又黄又粗又硬又大视频| 久久亚洲精品不卡| 亚洲五月婷婷丁香| 99国产精品99久久久久| 91成人精品电影| 亚洲国产精品成人综合色| 成人18禁高潮啪啪吃奶动态图| 日韩免费av在线播放| 久久中文字幕一级| 午夜久久久在线观看| 日本黄色视频三级网站网址| 久久久久久大精品| 亚洲男人的天堂狠狠| 国产视频一区二区在线看| 亚洲精品美女久久av网站| 国产片内射在线| 国产一区在线观看成人免费| 国产视频内射| 成人国产一区最新在线观看| 麻豆成人午夜福利视频| 国产视频一区二区在线看| 国产成人精品无人区| 国产熟女xx| 色综合站精品国产| 久久青草综合色| 国产精品久久久人人做人人爽| 91麻豆av在线| 亚洲国产毛片av蜜桃av| xxxwww97欧美| 亚洲av成人不卡在线观看播放网| av福利片在线| 麻豆久久精品国产亚洲av| 99riav亚洲国产免费| 免费无遮挡裸体视频| 一夜夜www| 亚洲国产日韩欧美精品在线观看 | 久久人妻av系列| 国产av一区二区精品久久| 欧美成人免费av一区二区三区| 男女午夜视频在线观看| 女警被强在线播放| 日韩欧美 国产精品| 国产亚洲av嫩草精品影院| 一级黄色大片毛片| av超薄肉色丝袜交足视频| 熟妇人妻久久中文字幕3abv| 成在线人永久免费视频| 色综合婷婷激情| 国产一区二区激情短视频| 怎么达到女性高潮| 亚洲熟妇中文字幕五十中出| 精品久久久久久久久久免费视频| 在线免费观看的www视频| 精品久久久久久久久久久久久 | 国产成人欧美在线观看| 人人妻人人澡欧美一区二区| 在线看三级毛片| ponron亚洲| 久久久国产成人免费| 亚洲精品国产区一区二| 午夜精品在线福利| 国产一区二区三区视频了| 在线观看免费日韩欧美大片| 成人特级黄色片久久久久久久| 欧美成人一区二区免费高清观看 | 国产亚洲精品一区二区www| 90打野战视频偷拍视频| 人人妻人人看人人澡| 久久久久久久午夜电影| 男男h啪啪无遮挡| 国产精品日韩av在线免费观看| 精品国产乱子伦一区二区三区| 亚洲男人天堂网一区| 最近最新中文字幕大全电影3 | 国产亚洲欧美精品永久| 日韩 欧美 亚洲 中文字幕| 精品久久蜜臀av无| 一级a爱片免费观看的视频| 性欧美人与动物交配| 亚洲成人精品中文字幕电影| 久久久国产成人精品二区| 亚洲自拍偷在线| 欧美黄色淫秽网站| 亚洲国产精品999在线| 在线av久久热| 亚洲第一av免费看| 欧美另类亚洲清纯唯美| 亚洲片人在线观看| 亚洲精品国产一区二区精华液| 美女免费视频网站| 欧美日韩亚洲国产一区二区在线观看| 国产精品香港三级国产av潘金莲| 亚洲国产中文字幕在线视频| 国产av一区二区精品久久| 国产精品永久免费网站| 久久精品国产清高在天天线| 男女那种视频在线观看| 免费高清视频大片| 一级毛片精品| 午夜福利免费观看在线| 女人爽到高潮嗷嗷叫在线视频| 国产精品av久久久久免费| 国产伦在线观看视频一区| 99国产综合亚洲精品| 国产亚洲精品av在线| 久久中文字幕一级| 欧美精品啪啪一区二区三区| 一个人观看的视频www高清免费观看 | 这个男人来自地球电影免费观看| 午夜两性在线视频| 真人一进一出gif抽搐免费| 亚洲国产欧美日韩在线播放| 国产国语露脸激情在线看| 此物有八面人人有两片| 老司机午夜十八禁免费视频| 日韩成人在线观看一区二区三区| 成熟少妇高潮喷水视频| 国产av一区二区精品久久| 亚洲欧洲精品一区二区精品久久久| 国产私拍福利视频在线观看| 亚洲欧美日韩高清在线视频| av有码第一页| 搡老熟女国产l中国老女人| 日本免费a在线| 久久久久国产精品人妻aⅴ院| 成人午夜高清在线视频 | 久99久视频精品免费| ponron亚洲| 免费在线观看亚洲国产| 国产在线观看jvid| 色尼玛亚洲综合影院| 国产91精品成人一区二区三区| 亚洲人成网站高清观看| 国产精品九九99| 亚洲国产欧美网| 制服丝袜大香蕉在线| 欧美激情久久久久久爽电影| av超薄肉色丝袜交足视频| 亚洲熟女毛片儿| 国产色视频综合| 老熟妇仑乱视频hdxx| 免费在线观看成人毛片| 97人妻精品一区二区三区麻豆 | 免费看a级黄色片| 久久草成人影院| 亚洲精品久久成人aⅴ小说| 伦理电影免费视频| 中文字幕人妻丝袜一区二区| 国产成人精品久久二区二区免费| 男女之事视频高清在线观看| 国语自产精品视频在线第100页| 十八禁人妻一区二区| 免费在线观看影片大全网站| 日本撒尿小便嘘嘘汇集6| 波多野结衣av一区二区av| 熟女少妇亚洲综合色aaa.| 91麻豆精品激情在线观看国产| 美女高潮到喷水免费观看| 窝窝影院91人妻| 听说在线观看完整版免费高清| 老鸭窝网址在线观看| 亚洲午夜精品一区,二区,三区| av超薄肉色丝袜交足视频| 日本黄色视频三级网站网址| 无人区码免费观看不卡| 精华霜和精华液先用哪个| 国产精品久久电影中文字幕| 国产精品二区激情视频| 久久精品国产综合久久久| 国产黄色小视频在线观看| 亚洲一区中文字幕在线| 两性夫妻黄色片| 国产精品久久久久久亚洲av鲁大| 亚洲av电影不卡..在线观看| 亚洲男人天堂网一区| 怎么达到女性高潮| 国产精品精品国产色婷婷| 色老头精品视频在线观看| 久久久久九九精品影院| 此物有八面人人有两片| 欧美另类亚洲清纯唯美| www.999成人在线观看| 亚洲午夜理论影院| 国产成人精品无人区| 一区二区三区激情视频| 免费在线观看亚洲国产| 欧美黑人精品巨大| 国产激情欧美一区二区| 91av网站免费观看| 一二三四在线观看免费中文在| 桃红色精品国产亚洲av| 国产精品影院久久| 日本三级黄在线观看| 长腿黑丝高跟| 欧美 亚洲 国产 日韩一| 这个男人来自地球电影免费观看| 男人舔女人的私密视频| 欧美另类亚洲清纯唯美| 老汉色av国产亚洲站长工具| 熟妇人妻久久中文字幕3abv| 高清毛片免费观看视频网站| 久久久久亚洲av毛片大全| 亚洲avbb在线观看| 免费高清视频大片| 老司机深夜福利视频在线观看| 欧美成人一区二区免费高清观看 | 动漫黄色视频在线观看| 国产视频内射| 国产欧美日韩一区二区三| 国产99久久九九免费精品| 中文字幕另类日韩欧美亚洲嫩草| 国产亚洲精品久久久久久毛片| 国产国语露脸激情在线看| 精品国产一区二区三区四区第35| 亚洲欧美日韩高清在线视频| 国产亚洲精品久久久久5区| 亚洲欧美精品综合一区二区三区| 久99久视频精品免费| 搡老岳熟女国产| 男女那种视频在线观看| 亚洲九九香蕉| 日韩中文字幕欧美一区二区| 99热6这里只有精品| 国产高清激情床上av| 成人一区二区视频在线观看| av视频在线观看入口| 国产一区二区三区视频了| 欧美丝袜亚洲另类 | 美女免费视频网站| 人人澡人人妻人| 久久人妻福利社区极品人妻图片| 亚洲中文字幕日韩| 很黄的视频免费| 午夜福利一区二区在线看| 久久国产亚洲av麻豆专区| 人成视频在线观看免费观看| 老熟妇仑乱视频hdxx| 色av中文字幕| 黄色视频不卡| 成年版毛片免费区| 18禁黄网站禁片午夜丰满| 一区福利在线观看| 麻豆一二三区av精品| 国产精品久久久久久人妻精品电影| 12—13女人毛片做爰片一| 亚洲欧美精品综合久久99| 亚洲熟妇中文字幕五十中出| 少妇熟女aⅴ在线视频| 午夜精品在线福利| 亚洲第一av免费看| 日日夜夜操网爽| 欧美在线一区亚洲| 男人舔女人的私密视频| svipshipincom国产片| 亚洲av日韩精品久久久久久密| 国产乱人伦免费视频| 国产麻豆成人av免费视频| 婷婷六月久久综合丁香| 看片在线看免费视频| 欧美黑人巨大hd| 久久精品人妻少妇| 欧洲精品卡2卡3卡4卡5卡区| 久久久久久大精品| 国产视频一区二区在线看| 桃色一区二区三区在线观看| 亚洲av美国av| 亚洲最大成人中文| 欧美日韩福利视频一区二区| 午夜福利欧美成人| 精品久久久久久久人妻蜜臀av| av超薄肉色丝袜交足视频| 此物有八面人人有两片| 久久午夜综合久久蜜桃| 中文字幕另类日韩欧美亚洲嫩草| 999久久久精品免费观看国产| 老司机午夜福利在线观看视频| 亚洲精品美女久久久久99蜜臀| 欧美精品啪啪一区二区三区| av福利片在线| 久久婷婷人人爽人人干人人爱| 久久久久久久久中文| www.www免费av| 久久国产乱子伦精品免费另类| 淫妇啪啪啪对白视频| 最近最新中文字幕大全免费视频| ponron亚洲| 成人18禁在线播放| 丝袜美腿诱惑在线| 国产成人欧美| 午夜成年电影在线免费观看| 日韩视频一区二区在线观看| 久久久久久免费高清国产稀缺| 精品欧美一区二区三区在线| 久久久久久国产a免费观看| 少妇 在线观看| 欧美黄色淫秽网站| 变态另类丝袜制服| 亚洲欧美精品综合一区二区三区| 国产视频内射| 亚洲av成人av| 欧美精品亚洲一区二区| 两人在一起打扑克的视频| 天堂动漫精品| 精品福利观看| e午夜精品久久久久久久| 天堂动漫精品| 欧美精品亚洲一区二区| e午夜精品久久久久久久| 一二三四社区在线视频社区8| 老熟妇乱子伦视频在线观看| 免费在线观看成人毛片| 99精品欧美一区二区三区四区| 美女国产高潮福利片在线看| 国内精品久久久久久久电影| 国产一卡二卡三卡精品| 两性午夜刺激爽爽歪歪视频在线观看 | 成年免费大片在线观看| 亚洲av成人av| 一二三四在线观看免费中文在| 欧美黄色淫秽网站| 国产午夜精品久久久久久| 亚洲五月色婷婷综合| 老司机午夜福利在线观看视频| 久久久久久久午夜电影| 一区二区三区激情视频| 亚洲精品国产一区二区精华液| 黑丝袜美女国产一区| 老汉色∧v一级毛片| 亚洲第一电影网av| 搡老妇女老女人老熟妇| 精品电影一区二区在线| 观看免费一级毛片| 亚洲一码二码三码区别大吗| av天堂在线播放| 久久青草综合色| 99riav亚洲国产免费| 精品国产一区二区三区四区第35| 精品国产国语对白av|