• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Si-Ge based vertical tunnel field-effect transistor of junction-less structure with improved sensitivity using dielectric modulation for biosensing applications

    2023-12-15 11:51:34LuckyAgarwalVarunMishraRaviPrakashDwivediVishalGoyalandShwetaTripathi
    Chinese Physics B 2023年12期

    Lucky Agarwal, Varun Mishra, Ravi Prakash Dwivedi,?, Vishal Goyal, and Shweta Tripathi

    1School of Electronics Engineering,Vellore Institute of Technology,Chennai 600127,India

    2Department of Electronics and Communication Engineering Graphic Era(deemed to be University),Dehradun,Uttarakhand 248002,India

    3Department of Electronics and Communication Engineering,GLA University,Mathura 281406,India

    4Department of Electronics and Communication Engineering,Motilal Nehru National Institute of Technology,Allahabad 211004,India

    Keywords: biomolecules,high-k dielectric,junction-less,vertical tunnel field effect transistor(TFET)

    1.Introduction

    Recently biosensors have become a focus of research as they are relatively cheap, highly sensitive and have a significant part to play in medicine, including in customized treatment and highly sensitive point-of-care disease marker detection.[1-3]Electrical detection of biomolecules using fieldeffect transistors (FETs) is particularly fascinating due to its label-free nature, scalability and on-chip integration of sensor and measurement systems.[4]Nanostructured FETs have gained importance due to their high electrostatic control and large surface-to-volume ratio.The basic idea is to add receptors to the oxide layer of the semiconductor to convert the FET into a biosensor.[5,6]These receptors act as destinations for the selected biomolecules,which produce effects on the semiconductor due to their charge,thus changing its electrical properties.

    The subthreshold region plays a vital role in getting the maximum changes in electrical properties, which puts conventional FETs at a greater disadvantage due to their minimum subthreshold swing (SS) of 60 mV·decade-1.[7-9]Such biosensors based on FET devices have less sensitivity and response time, and even when they are scaled these give rise to short-channel effects.This in turn leads to a low onstate/off-state current (ION/IOFF) ratio and high power consumption due to reverse leakage.These limitations have been somewhat alleviated through the introduction of tunnel FETs(TFETs),which are designed to have a similar assembly process, work even at low powers and have a lowerSS(below 60 mV·decade-1).[9-11]The better subthreshold behavior of TFETs can be leveraged to create extremely effective biosensors.This stands out because TFETs use a fundamentally distinct current injection process called band-to-band tunnelling(BTBT), which gives rise to protection from random dopant variations.[12-14]This tunnelling mechanism is preferred over diffusion as the barriers are thin enough over a large area for effective tunneling and provide a sufficient density of states on both the transmission and receiving sites to provide energetic locations for carriers.According to reports,FET-based biosensors are broadly applicable to the healthcare sector, pollution monitoring and biological pathogen management.[15-17]FETbased biosensors can inspect environmental biohazards and control viral infections economically.According to several researchers, TFET-based biosensors are a potential technology for achieving significantly enhanced sensitivity and response times compared with existing FET-based biosensors.[18-20]To increase the sensitivity of these devices in terms of highION,modified device structures such as dual metal gate, double or triple gate, pocket doping, etc.have been proposed in the literature.Metal oxide based TFET structures[1,17]are a major consideration of researchers,but heterojunction TFETs are no doubt a better alternative for modern integrated circuit technology.However, due to its ease of fabrication, the vertical TFET(V-TFET)structure has attracted more consideration than other reported TFET structures.[20-22]Furthermore,V-TFETs have fewer trapping difficulties,a lower buffer layer leakage current and are easier for building wrap-gated topologies.[23]Therefore, a device analysis of VTFETs as biosensors could be of great interest to many.

    Considering the structures reported in the literature, a junction-less VTFET(VJ-TFET)with a nanocavity embedded for biosensing is proposed in this paper.The sensitivity of the proposed structure is simulated on TCAD software and compared with TFET based biosensors.Analysis of the electrical simulation parameters of the proposed device includes looking at the energy band profile, transfer characteristics, drain current sensitivity,ION/IOFFratio andSS.In order to obtain the highestIONand lowestIOFF,the cavity’s thickness and length for biomolecule detection are also examined.Further,this research also looks at the effects of both neutral and charged biomarkers.To further comprehend the applicability of these biosensors, non-ideal circumstances such as steric hindrance and uneven probe placements have been researched.Lastly,the proposed VJ-TFET structure is benchmarked to previously published works.

    2.Device architecture and simulation methodology

    A cross-sectional view of the nanocavity entrenched proposed VJ-TFET structure along with its dimensions is shown in Fig.1.The width of the device is defined by thex-axis and its length by they-axis.The proposed VJ-TFET is a dual metal gate structure with a lower work function metal gate aroundφm1=4.7 eV near the source end andφm2=5.3 eV near the drain end.A SiO2/HfO2stacked oxide layer is inserted across the top and bottom ends of channel,replacing the conventional gate oxide.In the VJ-TFET,Si-Ge is used as the channel material.In Si-Ge, 30% Ge has been adopted throughout the analysis.Since,Si-Ge has lower bandgap than Si, tunnelling of electrons at the source channel increases,thereforeIONincreases.Moreover, due to the vertical structure, vertical tunnelling along with lateral tunnelling is observed, which may result in an increasedION.The band diagram of the VJ-TFET in the off and on states is shown in Figs.2(a) and 2(b) for a high-kdielectric material.It can be observed from the figure that the high-kmaterial (HfO2) shows more bending, resulting in higher tunnelling, therebyIONincreases, as shown in Fig.2(c).To make the proposed device structure junctionless a channel body of length 40 nm and thickness 10 nm is doped with an n-type impurity having a carrier concentration of 5×1019cm-3.To form p+pockets,platinum metal contacts with a work function of 5.93 eV are activated as source electrodes.This proves the versatility of the suggested structure and shows that there are no additional doping requirements,which solves the issue of random dopant fluctuation.The detailed parameters used in simulation of the VJ-TFET structure are given in Table 1.Further, to improve the confinement of the biomolecules, nanogaps are etched on both sides of the gate dielectric,as shown in Fig.1.The electrical characteristics of the device junction can be modulated by biomolecules trapped in the nanocavity.The biosensing process is simulated in an air environment so that better sensitivity can be achieved.

    Table 1.Structural parameters used in the simulations.

    Fig.1.Cross-sectional view of a VJ-TFET.

    The Silvaco ATLAS simulation tool was utilized to run the simulation; it uses the Laplace and Poisson equations to solve the device operation.The device dimensions and other parameters used to simulate the device structure are given in Table 1.Several physical models such as Fermi-Dirac,Shockley-Read-Hall recombination and field-dependent mobility are used to simulate the electrical characteristics of a device.[24]Further,non-local BTBT and quantum models are also advocated to incorporate BTBT and quantum confinement effects, respectively.The two-dimensional VJ-TFET has the same reproduction boundaries and model attributes as a standard VTFET, with the difference that the channel region is more heavily doped.The proposed structure is calibrated with the experimental data(obtained with the help of the Plot Digitizer tool) of the reported VTFET structure.All the dimensional parameters of the device are kept the same as reported,except for the number of gates.[14]The transfer characteristics calibrated are shown in Fig.2(d).The results are found to be in good agreement.Further, to make the proposed device work as a sensor,only one type of biomolecule is thought to be immobilized in the nanoedged cavities at any given moment.The permittivity of neutral charged biomolecules ranges from 1 to 10.The effect of varying charged biomolecules based on DNA values reported in the literature[26,27]is also explored at the nanoedged region to test the sensitivity of the proposed structure.

    Fig.2.Energy band diagram of the proposed structure: (a) off state and (b) on state.(c) Calibration of the proposed VTFET structure for dielectric material.(d)Comparison between simulated and experimental data.

    2.1.Principle of the proposed VJ-TFET structure

    For BTBT, the vertical dual metal double-gate architecture gives superior gate controllability to traditional topologies.The proposed VJ-TFET structure can be used for biosensing applications because of its highIONand lowSSof 33 mV·decade-1,compared with a conventional TFET structure, as observed from Fig.3.The highIONmay be due to the vertical tunnelling of carriers under a low electric field that reduces phonon scattering,thereby enhancing mobility.[28]An n-channel VJ-TFET structure with molybdenum and iridium as metal gate contacts is analyzed for biomolecule(dielectric constantk=1-10) sensing.Biosensors work by converting the concentrations of various biomolecules into conventional electrical signals utilizing specific physical and chemical reactions.When biomolecules react with the metal surface at the gate contact,a change in gate oxide capacitance occurs,which changes the overall threshold voltage of the device and hence the drain current.

    Fig.3.Comparison of simulated transfer characteristics of the proposed structure with a reference structure.

    3.Results and discussion

    The findings of simulations of the proposed VJ-TFET based biosensors using different dielectric constants(k=1,2,5,8,10)are discussed in this section.Further,the effect of diverse neutral,positively and negatively charged biomolecules on current is studied in depth.The value of dielectric constant for the sensing mechanism is selected based on the literature for TFET biosensors.[27,29-31]Lower dielectric constants up to 5 correspond to air, uricase, streptavidin, choline oxidase and (3-aminopropyl)triethoxysilane.Higher dielectric constants correspond to gluten,zein,egg-white lysozyme and acetylene tetrabromide(or 1,1,2,2-tetrabromoethane).

    3.1.Effect of neutral biomolecules on the sensitivity of the proposed structure

    The variation of the transfer characteristics of neutral biomolecules with different dielectric constants is presented in Fig.4(a).The drain current when the cavity is filled with air is shown byk=1 in Fig.4(a).It is clearly evident from the figure that on increasing the dielectric constant,IOFFreduces whileIONremains constant.A highkprovides better control over the channel as the oxide capacitance increases, thereby reducing the leakage of charge carriers and increasing the accumulation of charge carriers in the channel region,which enhancesION.Further, in addition to lateral tunnelling, there is a vertical BTBT in a perpendicular direction to the gate oxide due to the vertical structure that enhancedION.Moreover,the use of dual metal architecture in the proposed structure reducedIOFFdue to the gate with a higher work function towards the drain end.Therefore,the overallI-Vcharacteristics of the proposed structure are much better than the reported values.

    Fig.4.(a) The ID-VGS characteristics of biosensors for different dielectric constant values k.(b) Sensitivity of neutral biomolecules for different k.(c)Switching ratio and SS for different k.

    Sensitivity is measured in order to analyze the performance of the biosensor.Since it has the capacity to reflect the sensor’s response to the sensing targets,the state when the nanogap is empty or filled with air is chosen as a reference.In this work,sensitivity is evaluated with respect toIOFFat fixedVDSas expressed below:[3]

    whereIOFFairis the OFF drain current when the etch nanocavity is filled with air andIOFFksignifies the OFF drain current when the etched nanocavity is filled with biomolecules at fixedVDS.The sensitivity of the proposed structure with neutral biomolecules is shown in Fig.4(b).It is observed from Fig.4(a) thatIOFFreduces on increasingkdue to the generation of a large electric field, which improves the sensitivity of the proposed device.However,better sensitivity is obtained fork=10,whose order is of 104as presented in Fig.4(b).The increase in sensitivity is supported by the decrease inIOFF,because the p+source does not produce dominant charge carriers in a junction-less FET device.Further,the increase in sensitivity is supported by Fig.4(c),which shows the plot of switching ratio andSSagainstk.It is observed that the switching ratio(ION/IOFF) andSSimprove for higher values ofk, which improves the sensitivity of the device.

    3.2.Effect of charged biomolecules on sensitivity of the proposed structure

    In this section, the impact of positively and negatively charged biomolecules is analyzed in terms of transfer characteristics and sensitivity.Figures 5(a)and 5(b)show theID-VGSvariation fork=2,considering both positively and negatively charged biomolecules, respectively.The impact of charged biomolecules can be understood in terms of effective gate bias(VGSeff) and flat band voltage (VFB), which can be expressed as[31]

    whereVGSis applied gate bias,VFBis the flat band voltage when a charged biomolecule is present,V′FBis the flat band voltage when a charged biomolecule is absent,Nis a charged biomolecule andCeffis the effective capacitance.For a positively charged biomolecule,VFBreduces (as observed from Eq.(3), leading to an increase in effective gate bias voltage, which further increases the tunneling of charge carriers due to increase in the surface potential, thereby increasing the drain current.It is clearly evident from Fig.5(a).that drain current enhances with increase in the value of positively charged biomolecules.This may be due to the decrease in surface potential under the presence of positively charged biomolecules.The range of positively charged biomolecules is from 1×1011C·cm-2to 6×1012C·cm-2.For a fixedVGS,an increase in positively charged biomolecules increases the drain current.

    For negatively charged biomoleculesVFBincreases, suppressing the surface potential and effective gate bias due to which the tunnelling of charge carriers reduces, thereby reducing the drain current.Figure 5(b) shows the variation ofID-VGSof negatively charged biomolecules fork=2.It is observable from Fig.5(b) that on increasing the number of negatively charged biomolecules the drain current is suppressed.Consequently, the electrostatic field also reduces on increasing the number of negatively charged biomolecules due to suppression ofVGSeff.The range of negatively charged biomolecules is from-1×1011C·cm-2to-6×1012C·cm-2.Figures 5(c) and 5(d) present the variation ofID-VGSfork= 5 considering both positively and negatively charged biomolecules,respectively.For similar reasons to those stated above, the drain current increases with increase in positively charged biomolecules and reduces with negatively charged biomolecules.However, due to the increase ink,IOFFdecreases andIONincreases in contrast to the case fork=2.The reason for this can be understood from the expression forCeffin Eq.(3), which shows that for a fixed value ofVGSand interface charge,the increase inkwill increase or decrease the surface potential as per the polarity of the biomolecule.

    Fig.5.The ID-VGS characteristics of the proposed biosensor with positive interface charge biomolecules for different dielectric constants k:(a)k=2,(c)k=5,(e)k=8,(g)k=10;and with negative interface charge biomolecules for different k: (b)k=2,(d)k=5,(f)k=8,(h)k=10.

    Figures 5(e)-5(g)show the transfer characteristics of positively and negatively charged biomolecules fork= 8 andk=10,respectively.It is clearly observable thatIOFFreduces for higher values ofk.The VTFET based biosensor has a reduced ambipolarity effect due to the existence of a dual metal gate with a larger work function on the drain side,that further reducesIOFF.The minimumIOFFof 10-18A is observed in Fig.5(g)fork=10 andN=-6×1012.

    Fig.6.Threshold voltage variation for different dielectric constants: (a)positively charged biomolecule,(b)negatively charged biomolecule.Sensitivity variation for different dielectric constants: (c)positively charged biomolecule,(d)negatively charged biomolecule.

    Furthermore, threshold voltage is plotted with respect to positively and negatively charged biomolecules, as shown in Fig.6.It is clearly evident from Fig.6(a)that threshold voltage decreases as the number of positively charged biomolecules increases.The reason behind the decrease in threshold voltage is the reduction inVFBas mentioned in Eq.(3).However, for negatively charged biomolecules the opposite is the case, as observed from Fig.6(b); i.e., the threshold voltage increases with increase in the number of negatively charged biomolecules due to reduction in the effective gate bias voltage.With the inclusion of the term-qN/Ceffin Eq.(3), the effect of negatively charged biomolecules limits the depletion of the p-type channel.As a result, to deplete the channel, a gate voltage greater than the voltage of a neutral biomarker is required;this will increase the threshold voltage with increase inN.Thus, a reduced gate bias voltage would not be sufficient for charge inversion in the channel, thereby increasing the threshold voltage.

    Sensitivity is calculated using Eq.(1) and is plotted in Fig.6(c) with respect to positively and negatively charged biomolecules.It is observable from Fig.6(c) that sensitivity decreases with the number of positively charged biomolecules;the reason for this is the reduction inVFBwhich further increases the effective gate bias voltage that enhancesIOFF.However, for negatively charged biomolecules, as shown in Fig.6(d),sensitivity increases with increase in the number of negatively charged biomolecules due to an increase in the depletion width across the channel that increases the threshold voltage of the device.ThereforeIOFFdecreases, which improves the sensitivity of the device.Furthermore, the transfer characteristic plot for-8×1011cm-3negatively charged biomolecules are given in Fig.7, which shows a betterIOFF.This proves that the junction-less transistor is highly sensitive in terms ofIOFF.

    Fig.7.The ID-VGS characteristics for negatively charged biomolecules(-8×1011 cm-3).

    3.3.Effect of irregular fusion of biomolecules in the nanocavity of the proposed structure

    All the sensitivity calculations in the previous sections are predicated on the notion that the nanocavities of biosensors are entirely loaded with biomolecules.However,in practice,this assumption is not often fulfilled.When receptors or probes pierce the nanogaps,biomolecules may become immobilized and fuse.It is possible that this hybridization will not continue until all the nanogaps are filled, preventing further biomolecules from entering.This phenomenon is known as steric hindrance,and might lead to a non-uniform step profile of biomolecules inside the nanogaps.Figure 8 shows the proposed biosensor structure with five different biomolecule hybridization profiles: (a)decreasing steps,(b)increasing steps,(c) non-uniform steps (d) non-ideal hybridization case 1, (e)non-ideal hybridization case 2.For all these distinct nanogap step patterns comparisons are made of their sensitivities.

    Fig.8.Different profiles of hybridized nanogaps with(a)increasing step size,(b)decreasing step size,(c)nonuniform step size,(d)non-ideal hybridization case 1,(e)non-ideal hybridization case 2.

    To better comprehend how sensitivity is influenced by how much room the biomolecules take up inside the cavities,simulations have been done with fill factors of 40%and 60%for the first three profiles,withN=-6×1012cm-3,k=10,VGS=1.5 V,VDS=1 V.The simulation results for fill factors of 40% and 60% are listed in Table 2.Since the area of the etched nanocavity is 15 nm×5 nm,to maintain a fill factor of 40% the nanocavity is divided into seven equal parts with a cavity width for each cavity of 2.05 nm.[32]For the increasing steps hybridization profile, the step height is taken from 0.2 nm to 2.6 nm with a height difference of 0.4 nm.In the case of the decreasing steps profile, the converse is true.For the non-uniform profile, the step size is taken as 2.6 nm, 1.6 nm,0.6 nm,0.2 nm,0.6 nm,1.6 nm and 2.6 nm.To maintain a fill factor of 60%, the above same procedure is followed.For all profiles,the width of the steps inside the cavities is similar to the above analysis, while the height is varied from 4.5 nm to 1.5 nm for the increasing steps profile and vice versa for the decreasing steps profile.The height for non-uniform steps is kept at 5 nm,3.5 nm,1 nm,0.5 nm, 1 nm,3.5 nm and 5 nm.Table 2 shows that the decreasing steps profile has a superior response on average,but the increasing and non-uniform steps profiles have poor sensitivity.This may be due to the electron tunnelling current in the TFET structure at the source-channel junction,which is influenced by the dielectric constant of the gate oxide.Near the tunnelling junction,the decreasing profile has its biggest step,which raises the effective dielectric capacitance around it and hence enhances the sensitivity.Further it can be seen from the data in Table 2 that there is an increment of 8% to 10% in sensitivity when the fill factor is increased from 40%to 60%;this may be due to the increase in gate and channel coupling.

    The non-deal hybridization profile depends on the position of the probes.[33]The amount of fusion of biomolecules and probes depends on the position of the probes in the nanocavity,that will in turn influence the sensitivity of the proposed biosensors.Figures 8(d) and 8(e) depict the positions of probes inside cavities for the proposed biosensor structure.The yellow pillar area indicates the presence of biomolecules(k>1), whereas the unshaded area indicates the presence of air(k=1).Considering the position of the probes,two cases(case 1 and case 2) are considered for the study as shown in Figs.8(d) and 8(e).The data in Table 2 show that when biomolecules are present near the tunnelling junction(case 1)the sensitivity improves, but when biomolecules move away from the junction(case 2)the sensitivity begins to deteriorate,even though the fraction of the area occupied by biomolecules remains constant.

    Table 2.Sensitivity comparison for different biomolecule profiles.

    3.4.Standardization of proposed structure with reported work

    Dielectric modulated FET and TFET based biosensors have been the subject of several experimental, computersimulated and analytical modelling investigations.As a result,the sensitivities of other previously published sensors are contrasted with that of the proposed VJ-TFET based biosensor in this section to benchmark the proposed structure.

    Table 3 shows the status of the literature.The sensitivities were extracted from the published works and hence the term‘a(chǎn)pproximate’is used in the table.It is evident from Table 3 that the suggested VJ-TFET has superior sensitivity to the other FET based sensors due to the use of low bandgap material and vertical tunnelling,although the published works have different structural, doping and dielectric constant parameters.Numerous biosensor structures have been added to Table 3 in order to provide an overview of the various types of available biosensors.However, because of the differences in their current injection techniques, TFET-based biosensors have a far higher sensitivity than FET-based biosensors.

    Table 3.Comparison of different published FET structures.

    4.Conclusion

    The notion of a dual metal double gate VJ-TFET structure with nanogaps etched at both sides of a fixed dielectric as a highly sensitive biosensor has been presented in this paper.The proposed structure is junction-less with Si-Ge as a channel material; it shows its novelty in terms of ease of fabrication compared with other reported structures.An optimal sensitivity of 1.1×108is obtained for the proposed structure when fully filled with neutral biomolecules with a dielectric constant of 10.Due to the existence of both lateral and vertical tunnelling,the VJ-TFET has a higher sensitivity.The achieved rectification ratios highlight the proposed structure as a viable option.The effect of charged biomolecules on sensor performance has also been examined.The sensitivity of biosensors is observed to enhance and a value of 2×108was recorded as negatively charged biomolecules (6×1012C·cm-3) fill the etched nanogap.The utility of the sensor is further examined while accounting for steric impediments and unequal probe positions.The declining partially filled profile and the nonuniform steps profile both demonstrated the highest sensitivity.When the fill factor is increased from 40% to 60%, the sensitivity improves by 8%-10%,indicating that the proposed VJ-TFET is affected by the fill factor.When biomolecules are hybridized away from the tunnelling junction, the sensitivity is more negatively impacted, looking at two distinct possible probe sites.A comparison of the proposed biosensor is made with the MOSFET-based biosensor given in Ref.[35], and is benchmarked against established standards.Hence, the proposed biosensor is a promising candidate for label-free sensing due to its higher sensitivity and lower power consumption.

    Acknowledgement

    Authors greatly acknowledge MNNIT Allahabad for accessing the software facility.

    av在线app专区| 日韩视频在线欧美| 欧美日韩黄片免| 性色av一级| 亚洲国产欧美日韩在线播放| 亚洲中文字幕日韩| 大片免费播放器 马上看| 老司机深夜福利视频在线观看 | 交换朋友夫妻互换小说| 国产成人精品无人区| 男女下面插进去视频免费观看| 亚洲国产欧美一区二区综合| 亚洲国产精品一区二区三区在线| 曰老女人黄片| 伦理电影免费视频| 国产高清videossex| 亚洲国产欧美在线一区| 亚洲av电影在线观看一区二区三区| bbb黄色大片| 婷婷丁香在线五月| 熟女少妇亚洲综合色aaa.| 久久热在线av| 91老司机精品| 色播在线永久视频| 超碰成人久久| 久热爱精品视频在线9| 欧美日韩黄片免| 日本五十路高清| 欧美在线黄色| 亚洲国产精品999| 国产男女超爽视频在线观看| 满18在线观看网站| 香蕉国产在线看| 日韩制服骚丝袜av| 婷婷丁香在线五月| 50天的宝宝边吃奶边哭怎么回事| 国产亚洲欧美精品永久| 高清av免费在线| 人人妻人人添人人爽欧美一区卜| netflix在线观看网站| 亚洲自偷自拍图片 自拍| 侵犯人妻中文字幕一二三四区| 丝袜在线中文字幕| 午夜免费成人在线视频| 国产免费又黄又爽又色| 久久精品国产亚洲av涩爱| 日本a在线网址| 肉色欧美久久久久久久蜜桃| 大型av网站在线播放| 国产精品国产三级专区第一集| 国产精品国产三级专区第一集| 国产黄频视频在线观看| 亚洲精品久久久久久婷婷小说| 大香蕉久久成人网| 亚洲美女黄色视频免费看| 久9热在线精品视频| 欧美日韩福利视频一区二区| 欧美日韩福利视频一区二区| 日韩制服骚丝袜av| 熟女少妇亚洲综合色aaa.| 久久ye,这里只有精品| 欧美日韩视频高清一区二区三区二| 一区二区三区四区激情视频| 一本久久精品| 黄网站色视频无遮挡免费观看| 午夜免费成人在线视频| 熟女av电影| 五月开心婷婷网| 大陆偷拍与自拍| 婷婷色麻豆天堂久久| 日韩一卡2卡3卡4卡2021年| 国产一区二区 视频在线| 99国产精品一区二区三区| 欧美日韩亚洲高清精品| 亚洲av美国av| 9色porny在线观看| 亚洲午夜精品一区,二区,三区| 精品卡一卡二卡四卡免费| 精品国产超薄肉色丝袜足j| 国产在线观看jvid| 波野结衣二区三区在线| 嫁个100分男人电影在线观看 | 我的亚洲天堂| 五月天丁香电影| 黄色 视频免费看| 亚洲国产精品国产精品| 精品国产一区二区三区四区第35| 久久亚洲精品不卡| 欧美变态另类bdsm刘玥| 岛国毛片在线播放| 精品国产乱码久久久久久男人| cao死你这个sao货| 欧美亚洲 丝袜 人妻 在线| av福利片在线| 91麻豆av在线| 亚洲情色 制服丝袜| 亚洲av片天天在线观看| 99国产精品一区二区三区| 99热全是精品| 国产一区有黄有色的免费视频| 青春草视频在线免费观看| 欧美激情 高清一区二区三区| 国产三级黄色录像| 大型av网站在线播放| 18禁裸乳无遮挡动漫免费视频| 青春草亚洲视频在线观看| 亚洲欧美日韩另类电影网站| 九草在线视频观看| 操美女的视频在线观看| 日韩 亚洲 欧美在线| kizo精华| 精品国产一区二区久久| 中文乱码字字幕精品一区二区三区| 人妻 亚洲 视频| 丝袜人妻中文字幕| 热re99久久国产66热| 在线观看人妻少妇| 天堂中文最新版在线下载| 欧美中文综合在线视频| 午夜91福利影院| 中文字幕精品免费在线观看视频| 三上悠亚av全集在线观看| 亚洲国产欧美一区二区综合| 操出白浆在线播放| 两人在一起打扑克的视频| 日韩大片免费观看网站| 亚洲欧洲精品一区二区精品久久久| 午夜福利视频精品| 亚洲精品国产av成人精品| 黄网站色视频无遮挡免费观看| 男人舔女人的私密视频| 性色av乱码一区二区三区2| 久久天躁狠狠躁夜夜2o2o | 在现免费观看毛片| 久久精品亚洲熟妇少妇任你| 亚洲精品在线美女| 成年动漫av网址| 大型av网站在线播放| 国产精品 欧美亚洲| 少妇 在线观看| 国产91精品成人一区二区三区 | 精品一品国产午夜福利视频| 美女脱内裤让男人舔精品视频| 亚洲欧美一区二区三区黑人| 欧美日韩av久久| 午夜免费观看性视频| 成在线人永久免费视频| 亚洲色图 男人天堂 中文字幕| 国产日韩一区二区三区精品不卡| 精品福利观看| 亚洲三区欧美一区| 日本五十路高清| 1024香蕉在线观看| 免费观看人在逋| 99香蕉大伊视频| 国产精品一区二区免费欧美 | 亚洲五月色婷婷综合| 97在线人人人人妻| 叶爱在线成人免费视频播放| 国产国语露脸激情在线看| 高潮久久久久久久久久久不卡| 亚洲成人免费电影在线观看 | 久久青草综合色| 一级黄色大片毛片| 国产精品香港三级国产av潘金莲 | 女性被躁到高潮视频| 丝袜喷水一区| 国产免费福利视频在线观看| 婷婷丁香在线五月| 热99国产精品久久久久久7| 在线观看免费视频网站a站| 51午夜福利影视在线观看| www.精华液| 亚洲熟女毛片儿| 欧美黑人欧美精品刺激| 一区在线观看完整版| 国产成人a∨麻豆精品| 涩涩av久久男人的天堂| 一级毛片黄色毛片免费观看视频| 狂野欧美激情性xxxx| 午夜日韩欧美国产| 免费在线观看影片大全网站 | 美女脱内裤让男人舔精品视频| 国产97色在线日韩免费| av国产精品久久久久影院| 一区二区三区乱码不卡18| 亚洲五月色婷婷综合| 国产真人三级小视频在线观看| 国产免费现黄频在线看| 免费看十八禁软件| 亚洲伊人久久精品综合| 人人澡人人妻人| 亚洲一区中文字幕在线| av天堂在线播放| 十八禁网站网址无遮挡| 亚洲av欧美aⅴ国产| 人人妻人人澡人人看| 亚洲av电影在线观看一区二区三区| 99九九在线精品视频| 乱人伦中国视频| a级毛片在线看网站| 国精品久久久久久国模美| 久久国产精品男人的天堂亚洲| 免费人妻精品一区二区三区视频| 99国产精品一区二区三区| 一二三四社区在线视频社区8| 一级毛片 在线播放| 亚洲专区国产一区二区| 中文字幕另类日韩欧美亚洲嫩草| 中文字幕av电影在线播放| 国产精品香港三级国产av潘金莲 | 国产又爽黄色视频| 国产成人av教育| 狂野欧美激情性bbbbbb| 黑丝袜美女国产一区| 青春草亚洲视频在线观看| 极品少妇高潮喷水抽搐| 久9热在线精品视频| www日本在线高清视频| 中文字幕人妻丝袜一区二区| 日韩av免费高清视频| 每晚都被弄得嗷嗷叫到高潮| 又大又爽又粗| 色婷婷久久久亚洲欧美| 最近中文字幕2019免费版| av天堂久久9| 国产亚洲精品第一综合不卡| 观看av在线不卡| www日本在线高清视频| 在线天堂中文资源库| 大片电影免费在线观看免费| 乱人伦中国视频| 国产精品国产三级专区第一集| 在线观看免费高清a一片| 一区二区日韩欧美中文字幕| 成人国语在线视频| 国产精品一区二区精品视频观看| 老熟女久久久| 亚洲色图 男人天堂 中文字幕| 国产一区二区在线观看av| av国产精品久久久久影院| 天天躁夜夜躁狠狠躁躁| videosex国产| 制服诱惑二区| 天天躁日日躁夜夜躁夜夜| 久久久久久人人人人人| 美女中出高潮动态图| 欧美精品一区二区免费开放| 少妇猛男粗大的猛烈进出视频| 国产在线一区二区三区精| 久久中文字幕一级| 成人黄色视频免费在线看| 丰满人妻熟妇乱又伦精品不卡| 久久久久国产精品人妻一区二区| 人妻 亚洲 视频| 国产免费福利视频在线观看| svipshipincom国产片| 国产精品国产三级国产专区5o| 国产xxxxx性猛交| 99re6热这里在线精品视频| 99精国产麻豆久久婷婷| 18禁裸乳无遮挡动漫免费视频| 亚洲专区国产一区二区| kizo精华| 又大又爽又粗| 黄色毛片三级朝国网站| 97在线人人人人妻| 国产免费现黄频在线看| 国产成人免费观看mmmm| 手机成人av网站| 97在线人人人人妻| 亚洲国产欧美一区二区综合| 精品国产乱码久久久久久小说| 欧美日韩亚洲国产一区二区在线观看 | 建设人人有责人人尽责人人享有的| 国产精品久久久人人做人人爽| 岛国毛片在线播放| 精品国产乱码久久久久久男人| 天天躁夜夜躁狠狠久久av| 亚洲精品久久久久久婷婷小说| 脱女人内裤的视频| 新久久久久国产一级毛片| 中文字幕人妻丝袜一区二区| 精品免费久久久久久久清纯 | 嫩草影视91久久| 久久精品国产亚洲av涩爱| av片东京热男人的天堂| 我要看黄色一级片免费的| 成人国产一区最新在线观看 | 人妻人人澡人人爽人人| 久久久久久人人人人人| 19禁男女啪啪无遮挡网站| 一区二区三区精品91| 人人澡人人妻人| 国产精品一二三区在线看| 久热这里只有精品99| 亚洲av日韩精品久久久久久密 | 欧美成人精品欧美一级黄| 丝袜美腿诱惑在线| 色网站视频免费| 免费久久久久久久精品成人欧美视频| 国产日韩欧美视频二区| 国产成人欧美| 夫妻性生交免费视频一级片| 精品熟女少妇八av免费久了| 久久青草综合色| 免费在线观看影片大全网站 | bbb黄色大片| 97精品久久久久久久久久精品| 日韩欧美一区视频在线观看| 搡老岳熟女国产| 最近中文字幕2019免费版| 精品熟女少妇八av免费久了| 美女扒开内裤让男人捅视频| 亚洲成人手机| 午夜福利乱码中文字幕| 欧美人与性动交α欧美精品济南到| 好男人视频免费观看在线| 久久精品国产a三级三级三级| 日本a在线网址| 久久青草综合色| 99久久人妻综合| 久久精品国产亚洲av高清一级| 首页视频小说图片口味搜索 | 在线精品无人区一区二区三| 一区二区av电影网| 99国产精品一区二区三区| 久久亚洲国产成人精品v| 成年人黄色毛片网站| 国产精品久久久久成人av| 午夜福利视频在线观看免费| 啦啦啦 在线观看视频| 熟女少妇亚洲综合色aaa.| 国产精品一二三区在线看| videosex国产| 亚洲精品乱久久久久久| 黄网站色视频无遮挡免费观看| 男人添女人高潮全过程视频| 久久九九热精品免费| 国产成人免费无遮挡视频| 免费少妇av软件| 男的添女的下面高潮视频| 2018国产大陆天天弄谢| 伊人久久大香线蕉亚洲五| 人成视频在线观看免费观看| 9色porny在线观看| 丁香六月天网| 男女免费视频国产| 国产精品欧美亚洲77777| 亚洲中文字幕日韩| 肉色欧美久久久久久久蜜桃| 欧美少妇被猛烈插入视频| 91字幕亚洲| 国产黄色免费在线视频| 啦啦啦在线免费观看视频4| 午夜两性在线视频| 国产免费又黄又爽又色| 欧美成狂野欧美在线观看| 亚洲国产最新在线播放| 在线观看一区二区三区激情| 欧美变态另类bdsm刘玥| 国产麻豆69| 建设人人有责人人尽责人人享有的| 成年美女黄网站色视频大全免费| 国产国语露脸激情在线看| 国产片特级美女逼逼视频| 人妻一区二区av| 成年女人毛片免费观看观看9 | 亚洲五月色婷婷综合| 满18在线观看网站| 美女福利国产在线| 考比视频在线观看| 亚洲成国产人片在线观看| 在线 av 中文字幕| 国产欧美日韩一区二区三 | 中文欧美无线码| 亚洲色图综合在线观看| 日韩视频在线欧美| 亚洲av成人精品一二三区| 男人爽女人下面视频在线观看| 久久亚洲国产成人精品v| 国产一区亚洲一区在线观看| 曰老女人黄片| 香蕉丝袜av| 欧美少妇被猛烈插入视频| 国产野战对白在线观看| 观看av在线不卡| 亚洲欧美激情在线| 久久天堂一区二区三区四区| 啦啦啦在线观看免费高清www| 晚上一个人看的免费电影| 免费看十八禁软件| 欧美 亚洲 国产 日韩一| 91精品三级在线观看| 别揉我奶头~嗯~啊~动态视频 | 久久 成人 亚洲| 亚洲国产成人一精品久久久| 男女边摸边吃奶| 亚洲中文日韩欧美视频| 亚洲国产精品999| 国产精品秋霞免费鲁丝片| 天堂俺去俺来也www色官网| 香蕉丝袜av| 操美女的视频在线观看| 日韩 亚洲 欧美在线| 岛国毛片在线播放| 免费av中文字幕在线| 亚洲av成人不卡在线观看播放网 | 麻豆国产av国片精品| 国产精品99久久99久久久不卡| 99精国产麻豆久久婷婷| 看免费av毛片| kizo精华| 一级片'在线观看视频| av线在线观看网站| 后天国语完整版免费观看| 欧美精品亚洲一区二区| 天天添夜夜摸| 亚洲情色 制服丝袜| 午夜免费观看性视频| 国产精品亚洲av一区麻豆| 少妇粗大呻吟视频| 亚洲av欧美aⅴ国产| 婷婷色综合www| 国产精品九九99| 制服人妻中文乱码| 一区二区日韩欧美中文字幕| 久久久久视频综合| 老熟女久久久| 别揉我奶头~嗯~啊~动态视频 | 丁香六月天网| 视频区图区小说| 久久久精品区二区三区| 一级,二级,三级黄色视频| 97人妻天天添夜夜摸| 国产精品免费视频内射| 日韩一区二区三区影片| 丝袜人妻中文字幕| 亚洲欧美日韩另类电影网站| av视频免费观看在线观看| 国产精品人妻久久久影院| 免费黄频网站在线观看国产| av片东京热男人的天堂| 亚洲国产精品国产精品| 国产黄频视频在线观看| 麻豆乱淫一区二区| 亚洲一码二码三码区别大吗| 91九色精品人成在线观看| 国产男女超爽视频在线观看| 久久99热这里只频精品6学生| 精品一品国产午夜福利视频| 日韩制服骚丝袜av| 悠悠久久av| 日韩大码丰满熟妇| 亚洲精品日本国产第一区| 叶爱在线成人免费视频播放| 男男h啪啪无遮挡| 欧美老熟妇乱子伦牲交| svipshipincom国产片| 欧美97在线视频| 久久久久久亚洲精品国产蜜桃av| 日韩制服丝袜自拍偷拍| 波多野结衣一区麻豆| 亚洲av综合色区一区| 大香蕉久久成人网| 一边摸一边做爽爽视频免费| 满18在线观看网站| 2021少妇久久久久久久久久久| 精品国产超薄肉色丝袜足j| 久久久亚洲精品成人影院| 午夜两性在线视频| 国产麻豆69| 男人添女人高潮全过程视频| 国产一区二区 视频在线| 视频区欧美日本亚洲| 在现免费观看毛片| 欧美成狂野欧美在线观看| 午夜免费成人在线视频| 黑人猛操日本美女一级片| 捣出白浆h1v1| 99国产精品一区二区三区| 国产精品国产三级专区第一集| 999久久久国产精品视频| 国产精品人妻久久久影院| 亚洲成人国产一区在线观看 | 中文字幕人妻丝袜一区二区| 欧美乱码精品一区二区三区| 久久久亚洲精品成人影院| 午夜视频精品福利| 成人三级做爰电影| 久久久久精品人妻al黑| 无限看片的www在线观看| 丝袜人妻中文字幕| 亚洲精品一区蜜桃| 国产片内射在线| 性高湖久久久久久久久免费观看| 亚洲午夜精品一区,二区,三区| 国产一区二区三区av在线| 丁香六月天网| 精品第一国产精品| 色网站视频免费| 亚洲欧美日韩另类电影网站| 国产精品秋霞免费鲁丝片| 久久亚洲精品不卡| 国产1区2区3区精品| 亚洲欧美精品自产自拍| 蜜桃国产av成人99| 一本—道久久a久久精品蜜桃钙片| 免费看不卡的av| 真人做人爱边吃奶动态| 国产精品 国内视频| 狠狠精品人妻久久久久久综合| 久久久久国产一级毛片高清牌| 国产成人免费无遮挡视频| 永久免费av网站大全| 超碰97精品在线观看| 亚洲精品乱久久久久久| 人人妻人人爽人人添夜夜欢视频| 天天躁日日躁夜夜躁夜夜| 丝袜人妻中文字幕| 精品人妻1区二区| 亚洲欧洲精品一区二区精品久久久| 国产在线免费精品| 午夜激情av网站| 99精品久久久久人妻精品| 精品国产一区二区三区四区第35| 亚洲 欧美一区二区三区| 亚洲一码二码三码区别大吗| 久久久久久久大尺度免费视频| 啦啦啦在线观看免费高清www| 一二三四社区在线视频社区8| 热99国产精品久久久久久7| 国产一区二区三区av在线| 国产一区有黄有色的免费视频| 天堂8中文在线网| 一级毛片黄色毛片免费观看视频| 热re99久久精品国产66热6| 爱豆传媒免费全集在线观看| 91精品三级在线观看| 色婷婷久久久亚洲欧美| 欧美日韩福利视频一区二区| h视频一区二区三区| 日日爽夜夜爽网站| 日韩人妻精品一区2区三区| 999久久久国产精品视频| √禁漫天堂资源中文www| av有码第一页| 水蜜桃什么品种好| 性少妇av在线| kizo精华| 亚洲自偷自拍图片 自拍| 亚洲色图 男人天堂 中文字幕| 久久国产精品男人的天堂亚洲| 国产99久久九九免费精品| 欧美精品一区二区大全| 在线亚洲精品国产二区图片欧美| 国产成人啪精品午夜网站| 波野结衣二区三区在线| 亚洲熟女毛片儿| 中文字幕色久视频| www.av在线官网国产| 国产精品久久久久久精品电影小说| 女警被强在线播放| 蜜桃在线观看..| 欧美人与性动交α欧美软件| 69精品国产乱码久久久| 国产淫语在线视频| 久久国产亚洲av麻豆专区| 亚洲黑人精品在线| av线在线观看网站| 9色porny在线观看| 国产福利在线免费观看视频| 亚洲 国产 在线| www.熟女人妻精品国产| 大陆偷拍与自拍| 欧美日韩黄片免| 美女扒开内裤让男人捅视频| 波野结衣二区三区在线| 亚洲精品在线美女| 高清av免费在线| 女人久久www免费人成看片| 久热爱精品视频在线9| 99久久精品国产亚洲精品| 男女床上黄色一级片免费看| 下体分泌物呈黄色| 免费不卡黄色视频| 91精品三级在线观看| 下体分泌物呈黄色| 国产成人91sexporn| 91精品三级在线观看| 午夜激情av网站| 七月丁香在线播放| 99国产精品免费福利视频| 老司机在亚洲福利影院| 七月丁香在线播放| 啦啦啦 在线观看视频| 亚洲精品成人av观看孕妇| 日韩中文字幕视频在线看片| 性高湖久久久久久久久免费观看| 亚洲中文字幕日韩| 大片电影免费在线观看免费| 夫妻性生交免费视频一级片| 婷婷色av中文字幕| 黑人猛操日本美女一级片| 99国产综合亚洲精品| 婷婷色av中文字幕| 黑人猛操日本美女一级片| 国产伦人伦偷精品视频| 老汉色∧v一级毛片| 男女国产视频网站| 大话2 男鬼变身卡| 欧美+亚洲+日韩+国产| 久久国产精品人妻蜜桃| 交换朋友夫妻互换小说| 丁香六月天网|