• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    生物質基液化物制備納米纖維的研究進展*

    2021-12-04 11:23:50李興偉戚陽艷孫豐文
    關鍵詞:太爾林業大學林業局

    張 茜 高 婕 李興偉 戚陽艷 孫豐文

    (1.南京林業大學,江蘇 南京210037;2.廣東省林業科學研究院,廣東 廣州510520;3.江蘇省林業局,江蘇 南京210036;4.太爾化工(南京)有限公司,江蘇 南京210047)

    Biomass, as a renewable feedstock, is abundantly available, environment friendly, has good cycling stability and present lower cost. However, it has been demonstrated that the biomass-based material had lower mechanical strength compared to the synthetic polymer derived from fossil fuels. To overcome this limitation, it is a good idea to alter the morphology of biomass into one dimensional structure by transforming the biomass into nanofiber.

    Nanofibers have emerged as exciting one-dimensional(1D) nanomaterials for a wide range of research and commercial applications, which show several interesting features, such as a diameter 1000 times smaller than that of human hair, high surface area with tunable porosity, 3D topography, and better mechanical properties than any other commonly used base material[1-2]. Hence, Biomass-based nanofibers with these surface and bulk features are endowed with various functionalities, leading to potential applications.

    Fig.1 Typical electrospun nanofibers

    Traditional method to produce biomass fibers have been known as mechanical grinding and viscos techniques with the drawback of complicated process,environmental unfriendly and not being fully utilized which wastes a lot of resources[3-4]. Moreover, the obtained fibers by these ways are unable to reach nano scale. In order to produce biomass nanofibers, many researchers around the world have explored various fabrication techniques, including vapor deposition[5],solution blowing[6], centrifugal spinning[7], drawing techniques[8], template synthesis[9], self-assembly[10],phase separation[11], freeze-drying synthesis[12]. However, these methods usually have such disadvantages as harsh preparation conditions, complex equipment,limited fiber length-diameter ratio, and poor quality of the precursors, which hinders their application range greatly. While, in this case, the electrospun technology, demonstrated as an effective approach to prepare nano fibers[13], stands out and be a hotspot in academic researches and industry.

    Liquefaction technology is an effective way to utilize biological resources. Through liquefaction,solid bio-based macromolecules can be decomposed to small active molecules with certain fluidity, which make the insoluble biomass material to be spinnable.So, the integration of the liquefaction and electronspun will create new opportunities for improving the quality of biomass fiber and expanding its use for widespread application[14].

    To the best of authors’ knowledge, there is no review on liquefied biomass as a precursor for nanofibers by electrospun. Thus, it is thought useful to discuss the prospects of biomass-derived nanofiber by liquefaction and electrospun. This review briefly summarized the history and development of biomass liquefaction techniques, then described the characteristics and the main categories of electrospun. And the fabrication technique from liquefied biomass by electrospun and the properties of biomass nanofibers were also reviewed and discussed. Finally, several suggestions on technical issues, research work and potential applications were proposed to attract more interested in these fields by researchers and manufacturers.

    The history and development of biomass liquefaction techniques

    Biomass materials are hard to be utilized due to their difficult processing characteristics-insoluble and infusible. The traditional method through burning would cause serious pollution to the environment.Liquefaction is one of the most effective way to use biomass materials. By liquefaction, biomass materials are converted to active compounds with different chemical properties as a substitute of non-renewable petroleum resources or petrochemical materials.

    The technology of biomass liquefaction started with wood liquefaction and went by a developing process from high-temperature and high-pressure liquefaction,wood modified liquefaction to solvent liquefaction. Under high-temperature and high-pressure conditions, the reaction was intense, the gas H2and CO providing high pressure were not safe and wood component been seriously degraded was not conducive to prepare polymer materials. After chemical modification on wood, substituents were introduced to increase the free space in wood tissue. The intermolecular interaction of wood components was reduced so the liquefaction temperature was reduced. In addition,the solubility of modified wood in organic solvent was improved. However, the method was complicated and the cost was high. As the development of catalyst and solvent, the wood could be liquefied directly by new catalyst, suitable solvent with proper temperature and pressure. Subsequently liquefaction objects are extended to all kinds of biomass raw materials, such as wood sawdust (fir, poplar, pine, salix), bamboo, straw,shell (peanut shell, camellia shell, walnut shell) and other agricultural and forestry residues[16].

    To date, the main biomass liquefaction techniques can be classified as phenol liquefaction and polyols liquefaction according to the distinct catalyst and solvent. Phenol liquefaction is the intermediate-temperature reaction with acid as catalyst in the presence of phenol. The liquefaction has the similar properties of phenol, and can replace part or all the phenol to participate in the synthesis of phenolic resin.Polyols liquefaction is acid catalyzed liquefaction in the presence of polyols, which has the similar properties of polyols and can react with isocyanates to prepare polyurethane adhesives or foams[15-16].

    On account of the limited application of biomass liquefaction, few related researches have been reported since 2010. The emerging application for nanofiber by electrospun gives the liquefied biomass a new chance to reattract scholar’s attention as spinning fluid precursor[17-22].

    The characteristics and the main categories of electrospun

    Electrospinning employs electrostatic forces to produce fibers with a diameter up to 100 nm by manipulating charged threads of polymer solutions or melts, which has several advantages:

    Mass-production potential: this technology has wide applicability to raw materials. Almost all kinds of high-molecular polymers can produce nanofibers by electrospun, and the production rate is much faster than that of other nanofiber production methods such as self-assembly, template polymerization and phase separation[23]. Therefore, it has the potential for industrial production.

    Multiscale hierarchical structures: the electrospinning technology is already well developed with different polymer (Bi-component and multi-component) and various structural tunability (Coaxial and tri-axial ) that can formulate different fibers (fiber, film and 3D scaffold) with multiscale hierarchical structures (islands-in-the-sea[24], core-shell[25], side-by-side[26], split table pie[27],and eccentric sheath-core structures[25]).

    Fig.2 Electrospinning structure

    High maneuverability: Low staring cost for industrial production, the equipment is simple. Generally, the fiber diameter, morphology, alignment, and molecular orientation are influenced by the solvent,the collector, the applied voltage, the tip-to-collector distance, and the solution flow rate[28].

    There are mainly two types of electrospun: polymer solutions electrospun and polymer melt electrospun.

    Electrospinning techniques work with polymer solutions is the method that the polymer is dissolved in a volatile solvent (5%-30%) and placed in a syringe. The polymer solution is then pushed at a specific rate through the spinneret by external pumping using mechanical pistons. The quite high solvent concentration (up to 30%) gives sufficient viscoelastic properties. When the solution droplet is formed at the spinneret, an electric voltage bias (10-40 kV) is generated between the tip and the collector that is placed at a distance of 5-30cm. Due to the progressive increase of the applied voltage, the electric forces becomes higher than the surface tension. Consequently, a jet is produced, and the droplet is deformed into an apex(Taylor cone)[29-30]. Despite the widespread use and low starting costs of electro-spinning methods to fabricate nanofibers from polymer solutions, their mass production is still limited due to the low productivity and the large mass of the evaporating solvent (mainly organic solvents) which has a negative effect on the environment.

    Hot melt electrospinning, as a solvent-free electrospinning method, has a set-up with moving collectors to produce fibrous materials from polymer melts.However, melt electrospinning is not frequently used due to the difficulty to produce finer fibers, the complication of equipment with heating unit (not suitable for the raw material with poor thermal stability)., and the electrical discharge associated with the high voltage applied to the polymeric melt[31].

    Nanofiber fabrication technique with liquefied biomass by electrospun

    Recently, there have been dozens of reports on the beneficial attempt of fabricating nanofibers from liquefied biomass by electrostatic spinning, which can be categorized to the preparation method of spun precursor and fabrication method of electrospun.

    Fig.3 Nanofiber fabrication technique with liquefied biomass by electrospun

    Preparation method of spun precursor

    Solution electrospun precursor:

    Liquefied biomass was prepared by phenol liquefaction technique. Then, thermosetting resin was synthesized by formaldehyde and the liquefied biomass with NaOH as catalyst, an electronspun solution with concentration of 20%-30% was finally prepared with ethanol as solvent[19,32].

    Liquefied biomass was prepared by polyols liquefaction technique. Then, thermosetting resin was synthesized by isocyanate and the liquefied biomass,an electronspun solution with concentration of 20%-30% was finally prepared with Dimethyl Formamide(DMF) / Tetra Hydro Furan (THF) as solvent[17].

    Viscosity and conductivity are important indexes to evaluate spinnability of spinning solution.

    The solution must have a minimum concentration and viscosity to produce fibers by electrospinning.At very low concentration,the viscous force of the solution is also low, which is not enough to resist the force of electric field and the solution cannot be electrospun and is electrosprayed forming beads. When the viscous force increases, the electrostatic jet will not break, and the beads are gradually become Taylor cone. When the viscous force is large enough, the electrostatic force remains unchanged, resulting in the reduction of the tensile force, finally cause the increasing of fiber’s diameter[1].

    The surface tension is influenced by the solvent used. When the conductivity of the solution is too low,the electrostatic force cannot overcome the surface tension of the solution, so the fiber cannot be produced. With the increasing of conductivity, the surface charge density changes, which allows better control of the fiber diameter and morphology[29].

    Generally, the viscosity and conductivity can be regulated by adjusting the process of liquefaction and resinification. As the thermosetting resin always has low degree of polymerization, which is not enough to generate entanglement between molecular chains, no continuous jet can be obtained under the high electric field, only intermittent droplets being formed. In order to obtain a proper viscosity, Polyvinyl Alcohol (PVA)/Polyvinyl Butyral(PVB) were often used as a blending agent with phenol liquefication product as spun precursor[19,32-33],while 1,4 butanediol were used as chain extender in polyols liquefication product[19], but the resulting problems of fiber defects should also be paid attention to.

    Melt electrospun precursor:

    Liquefied biomass was prepared by phenol liquefaction technique. Then, thermoplasticity resin as an electronspun solution was synthesized by HMTA as a crosslinking agent with the liquefied biomass[18,20-22].

    Liquefied biomass was prepared by polyols liquefaction technique. Then, thermoplasticity resin as an electronspun solution was mixed by Thermoplastic Urethane( TPU) with the liquefied biomass[17].

    Rheological properties such as index, structural viscosity index, zero-shear viscosity and viscous flow activation energy are crucial factors to evaluate spinnability of spinning melt. It was demonstrated the melt temperature, concentration and crosslinking agent dosage have a major influence on the above rheological parameters. The non-newtonian index increases with the increase of melt temperature, but decreases with the increase of concentration and crosslinking agent dosage. The structural viscosity index decreases with the increase of melt temperature, but increases with the increase of concentration and crosslinking agent dosage. The viscous flow activation energy increases with the increase of the rigid components in the melt and is highly sensitive to temperature[34].

    Fabrication method of electrospun

    In recent years, great progress has been made in the research on the electrospun fabrication technique. Parameters of electrospun for different types of polymer compounds and their influences on the fiber properties have been carefully studied in many literatures. There exists certain degree of similarities on the structure and properties between liquefied biomass and polymer compounds, so it is feasible to study the electrospun fabrication method of liquefied biomass based on the study of polymer compounds. The scope of fabrication parameters for liquefied biomass nanofibers can be summarized as: electric field voltage 7-32.5 kV, tip-to-collector distance 10-25 cm, solution concentration 5%-46%, flow rate in the syringe 0.3 to 1.5 mL/h[14].

    Fig.4 Electrospinning apparatus

    Besides, some rules need to be mastered: If the solvent has lower boiling point, membrane will be formed as the solvent is more volatile in the electrospinning process[35]. With the further improvement of the solution concentration, the fiber will have better orientation to obtain cylindrical shape[36]. However,when the solution concentration is too high, it is necessary to gradually increase the voltage and reduce the solution surface tension, which is conducive to produce smooth surface fibers[28]. The solution concentration of polymer with high molecular weight should be lower than that of polymer with low molecular weight for electrospun. The strength of fibers can be improved by simply heating or curing with acid after spinning[18,21-22].

    Conclusion and prospects

    Using renewable biomass resources to prepare nanofibers can not only reduce the cost, increase the added value of products, but also bring more opportunities for the development of this technology for many different applications[37]:

    (1) Nanofibers have huge specific surface area,which give materials unique surface adsorbability,having great prospects in air purification, industrial wastewater treatment, hydrogen storage, supercapacitors and other aspects;

    (2) Nanofibers have extremely small size,which make gas diffuse quickly( thousands of times faster than that of traditional materials), can be well used in environmental protection fields such as filtration and seawater desalination;

    (3) After carbonizing, nanofibers become to carbon fibers, which are the lightweight and highstrength reinforced fibers, having a broad prospect.

    However, the research on preparation of nanofibers by electrospun from liquefied biomass is still in infancy, fibers obtained in current research have some shortcomings, such as larger fiber diameter (only obtaining micron fiber not nano fiber), poor fiber morphology, poor mechanical strength, etc. A lot of work needs to be developed as follows:

    1. In terms of the synthesis process of spun precursor, since fiber defects was easily caused by the existing blending process, the copolymerization process should be explored to improve the uniformity of the precursor.

    2. In terms of spinning equipment, aiming at the problem that the nozzle is easily blocked by the liquefied biomass, proper device for liquefied biomass should be design such as needle-free in nozzle and so on.

    3. Based on the advantages of component designability of electrospun, liquefied-biomass with different intrinsic properties such as the rigid content of phenol liquefied resin and flexible content of polyols liquefied resin can be composited by spinning. And mixing inorganic functional nanoparticles with biomass nanofibers gives special photoelectric properties to composite nanofibers.

    4. According to the structural tunability of electrospun, multiscale architecture such as island structure, core-shell structure and side-by-side structure can be obtained by changing the syringe, and different dimensions such as fiber, membrane and scaffold also be obtained by changing the collector. Drawbacks in the performance of biomass fiber could be remedied by reasonable structure design.

    猜你喜歡
    太爾林業大學林業局
    《南京林業大學學報(自然科學版)》征稿簡則
    《南京林業大學學報(自然科學版)》征稿簡則
    《南京林業大學學報(自然科學版)》征稿簡則
    硝呋太爾中殘留溶劑測定
    云南化工(2021年11期)2022-01-12 06:06:18
    《南京林業大學學報(自然科學版)》征稿簡則
    省林業局舉行系列活動慶祝建黨100周年
    淺談大楊樹林業局森林防撲火工作的現狀及對策
    活力(2019年15期)2019-09-25 07:21:58
    黑棗樹周年管理歷
    河北果樹(2016年2期)2016-08-12 07:03:41
    云南省林業廳《種子法》實施十周年宣傳活動林木種苗法律法規知識競賽獲獎名單
    童話歌劇
    琴童(2009年7期)2009-07-20 10:06:42
    欧美国产日韩亚洲一区| 国产精品精品国产色婷婷| 香蕉av资源在线| 精品福利观看| 三级经典国产精品| 夜夜看夜夜爽夜夜摸| 老熟妇仑乱视频hdxx| 神马国产精品三级电影在线观看| 美女大奶头视频| 亚洲精品成人久久久久久| 亚洲美女视频黄频| 国产精品久久久久久精品电影| 国产私拍福利视频在线观看| 国产av不卡久久| 99九九线精品视频在线观看视频| 一夜夜www| 97热精品久久久久久| 简卡轻食公司| 性欧美人与动物交配| 久久久久久久久久久丰满| 精品久久久噜噜| 日韩成人伦理影院| 亚洲av五月六月丁香网| av.在线天堂| 亚洲精品亚洲一区二区| 在线观看一区二区三区| 99久久精品热视频| 变态另类丝袜制服| 日韩欧美免费精品| 97热精品久久久久久| 狂野欧美白嫩少妇大欣赏| aaaaa片日本免费| 我的女老师完整版在线观看| 中文字幕av成人在线电影| 亚洲,欧美,日韩| 长腿黑丝高跟| 中文字幕av成人在线电影| 不卡一级毛片| 伊人久久精品亚洲午夜| 青春草视频在线免费观看| 99久久精品国产国产毛片| 哪里可以看免费的av片| 99国产极品粉嫩在线观看| 亚洲中文字幕一区二区三区有码在线看| 久久久久久久久久成人| 久久久久久久久中文| 久久久国产成人精品二区| 给我免费播放毛片高清在线观看| 舔av片在线| 丰满乱子伦码专区| 欧美性猛交╳xxx乱大交人| 女人十人毛片免费观看3o分钟| 久久久精品欧美日韩精品| 久久久久久大精品| 一级毛片久久久久久久久女| 最近中文字幕高清免费大全6| 最后的刺客免费高清国语| 国产亚洲av嫩草精品影院| 亚洲四区av| 亚洲欧美中文字幕日韩二区| 一级黄片播放器| 免费黄网站久久成人精品| 免费观看精品视频网站| 日韩人妻高清精品专区| 国产精品精品国产色婷婷| 国产日本99.免费观看| 久久久久久久久中文| 国产三级中文精品| 日韩欧美免费精品| 欧美高清性xxxxhd video| 大香蕉久久网| 我的女老师完整版在线观看| 成人性生交大片免费视频hd| 亚洲精华国产精华液的使用体验 | 欧美日韩一区二区视频在线观看视频在线 | 久久鲁丝午夜福利片| 中文字幕av在线有码专区| 国产精品人妻久久久久久| 亚洲,欧美,日韩| 真人做人爱边吃奶动态| 国产精品野战在线观看| 真实男女啪啪啪动态图| 免费观看精品视频网站| 99精品在免费线老司机午夜| 国产亚洲精品av在线| 国产老妇女一区| 欧美一区二区精品小视频在线| 九九在线视频观看精品| 成人鲁丝片一二三区免费| 国产淫片久久久久久久久| 国产亚洲精品久久久com| 精品一区二区三区视频在线| 99在线视频只有这里精品首页| 欧美色视频一区免费| 免费看美女性在线毛片视频| 亚洲av.av天堂| 日本-黄色视频高清免费观看| 在线播放无遮挡| 欧美极品一区二区三区四区| 天天躁夜夜躁狠狠久久av| 国产aⅴ精品一区二区三区波| 国产美女午夜福利| 国产亚洲91精品色在线| 久久人人精品亚洲av| 色综合色国产| 国产亚洲精品久久久久久毛片| 精品久久久久久久人妻蜜臀av| 精品久久久久久久久久免费视频| 亚洲人成网站高清观看| 干丝袜人妻中文字幕| 亚洲国产色片| 麻豆成人午夜福利视频| 精品免费久久久久久久清纯| 国产黄a三级三级三级人| 久久人人爽人人爽人人片va| 综合色丁香网| 成人午夜高清在线视频| av在线观看视频网站免费| 插逼视频在线观看| 国产极品精品免费视频能看的| 成人高潮视频无遮挡免费网站| 寂寞人妻少妇视频99o| 午夜福利18| 黑人高潮一二区| 日本免费a在线| 久久久久久大精品| 长腿黑丝高跟| 国产成人a∨麻豆精品| 色综合站精品国产| 欧美性猛交黑人性爽| 免费电影在线观看免费观看| av在线天堂中文字幕| 91在线精品国自产拍蜜月| 精品久久久久久久末码| 国产麻豆成人av免费视频| 欧洲精品卡2卡3卡4卡5卡区| 丝袜喷水一区| 亚洲欧美精品综合久久99| 免费观看精品视频网站| 欧美高清成人免费视频www| 欧美日韩综合久久久久久| 亚洲成人久久性| 久久精品国产自在天天线| 亚洲精品粉嫩美女一区| 欧美zozozo另类| 亚洲精品影视一区二区三区av| av视频在线观看入口| 国产人妻一区二区三区在| 免费在线观看成人毛片| 久久精品国产亚洲网站| 色尼玛亚洲综合影院| 联通29元200g的流量卡| 欧美最黄视频在线播放免费| 色5月婷婷丁香| .国产精品久久| 亚洲激情五月婷婷啪啪| 午夜福利成人在线免费观看| 精品久久久久久成人av| 日本一本二区三区精品| 看片在线看免费视频| 又黄又爽又免费观看的视频| h日本视频在线播放| 波野结衣二区三区在线| 亚洲中文字幕一区二区三区有码在线看| 国产爱豆传媒在线观看| 欧美最新免费一区二区三区| 日本-黄色视频高清免费观看| av天堂在线播放| 亚洲精品日韩av片在线观看| 亚洲欧美成人综合另类久久久 | 国产真实伦视频高清在线观看| 嫩草影视91久久| 久久精品国产亚洲av香蕉五月| 国产男人的电影天堂91| 免费大片18禁| 美女内射精品一级片tv| 日韩欧美免费精品| 天美传媒精品一区二区| 日日摸夜夜添夜夜爱| 欧美色视频一区免费| 国产美女午夜福利| 中文在线观看免费www的网站| 亚洲中文日韩欧美视频| 国产精品1区2区在线观看.| 久久精品91蜜桃| 男人舔奶头视频| 欧美bdsm另类| 国产精品一及| 91久久精品国产一区二区三区| 天天躁日日操中文字幕| 狂野欧美白嫩少妇大欣赏| 国产视频内射| 精品久久久久久久久久久久久| 成人二区视频| 69av精品久久久久久| 校园人妻丝袜中文字幕| 女人十人毛片免费观看3o分钟| 麻豆国产av国片精品| 亚洲久久久久久中文字幕| 天堂网av新在线| 国产精品国产高清国产av| 欧美一区二区精品小视频在线| 少妇丰满av| 国产黄a三级三级三级人| 国产黄a三级三级三级人| 亚洲性夜色夜夜综合| 最近视频中文字幕2019在线8| 亚洲精品粉嫩美女一区| 国模一区二区三区四区视频| 一级av片app| 九九爱精品视频在线观看| 少妇人妻精品综合一区二区 | 狠狠狠狠99中文字幕| 亚洲精品色激情综合| 一级a爱片免费观看的视频| 深夜a级毛片| 欧美一区二区精品小视频在线| 99久国产av精品| 五月玫瑰六月丁香| 色噜噜av男人的天堂激情| 亚洲精品成人久久久久久| 国内精品美女久久久久久| 日韩精品中文字幕看吧| 国产精品亚洲美女久久久| 大又大粗又爽又黄少妇毛片口| 亚洲图色成人| 啦啦啦啦在线视频资源| 少妇人妻精品综合一区二区 | 蜜桃亚洲精品一区二区三区| .国产精品久久| 欧美一区二区精品小视频在线| 精品福利观看| 精品人妻熟女av久视频| 亚洲av不卡在线观看| 麻豆一二三区av精品| 国产熟女欧美一区二区| 午夜影院日韩av| 欧美一区二区国产精品久久精品| 久久午夜亚洲精品久久| 又黄又爽又刺激的免费视频.| 亚洲精品一卡2卡三卡4卡5卡| 亚洲精品一区av在线观看| 亚洲国产欧洲综合997久久,| 日韩欧美精品免费久久| 欧美丝袜亚洲另类| 中文在线观看免费www的网站| 日韩国内少妇激情av| 亚洲真实伦在线观看| or卡值多少钱| 亚洲av免费高清在线观看| 级片在线观看| 国产精品乱码一区二三区的特点| ponron亚洲| 国产高清视频在线观看网站| 国产一区二区三区在线臀色熟女| 美女cb高潮喷水在线观看| 干丝袜人妻中文字幕| 国产又黄又爽又无遮挡在线| 国产毛片a区久久久久| 亚洲精品亚洲一区二区| 国产精品一及| 一本久久中文字幕| 中文字幕久久专区| 午夜影院日韩av| 一个人观看的视频www高清免费观看| 美女 人体艺术 gogo| 国产成人a区在线观看| 亚洲第一区二区三区不卡| 深夜精品福利| 亚洲欧美中文字幕日韩二区| 亚洲精华国产精华液的使用体验 | 国产伦在线观看视频一区| 日本-黄色视频高清免费观看| 亚洲综合色惰| 久久九九热精品免费| 亚洲国产精品国产精品| .国产精品久久| 国产精品免费一区二区三区在线| 欧美性猛交╳xxx乱大交人| 丝袜美腿在线中文| 最近手机中文字幕大全| 少妇人妻精品综合一区二区 | АⅤ资源中文在线天堂| 午夜免费激情av| 成熟少妇高潮喷水视频| 久久久久免费精品人妻一区二区| 国产熟女欧美一区二区| 久久久久久伊人网av| 久久人人爽人人爽人人片va| 在线观看午夜福利视频| 桃色一区二区三区在线观看| 春色校园在线视频观看| 亚洲av成人精品一区久久| 日韩欧美 国产精品| 亚洲无线在线观看| 男人狂女人下面高潮的视频| 白带黄色成豆腐渣| 黑人高潮一二区| 在线免费观看不下载黄p国产| 尾随美女入室| 日韩中字成人| 亚洲欧美清纯卡通| a级一级毛片免费在线观看| 婷婷精品国产亚洲av在线| 岛国在线免费视频观看| 久久精品国产鲁丝片午夜精品| 麻豆久久精品国产亚洲av| 听说在线观看完整版免费高清| 中出人妻视频一区二区| 女同久久另类99精品国产91| 哪里可以看免费的av片| 麻豆精品久久久久久蜜桃| 国内精品久久久久精免费| 亚洲精品456在线播放app| 99热这里只有是精品50| 国产精品久久久久久久电影| 日产精品乱码卡一卡2卡三| 亚洲人成网站在线播放欧美日韩| 婷婷色综合大香蕉| 嫩草影院入口| 欧洲精品卡2卡3卡4卡5卡区| 两性午夜刺激爽爽歪歪视频在线观看| 大型黄色视频在线免费观看| 天堂√8在线中文| 国产亚洲av嫩草精品影院| 欧美3d第一页| 亚洲人成网站在线观看播放| 国内精品一区二区在线观看| 老熟妇仑乱视频hdxx| 99久久精品热视频| 变态另类丝袜制服| 一级毛片aaaaaa免费看小| 日本免费一区二区三区高清不卡| 天美传媒精品一区二区| 观看免费一级毛片| 日本五十路高清| 国产成人a∨麻豆精品| 免费人成在线观看视频色| 国产精品福利在线免费观看| 亚洲精品久久国产高清桃花| 人人妻人人看人人澡| 国产不卡一卡二| 亚洲最大成人手机在线| 色5月婷婷丁香| 亚洲av.av天堂| 非洲黑人性xxxx精品又粗又长| 国产黄片美女视频| 国产一区二区激情短视频| 特大巨黑吊av在线直播| 亚洲电影在线观看av| 欧美性猛交╳xxx乱大交人| 国产av一区在线观看免费| 欧美+亚洲+日韩+国产| 91在线精品国自产拍蜜月| 国产色爽女视频免费观看| 99热6这里只有精品| 日韩在线高清观看一区二区三区| av中文乱码字幕在线| 成人特级av手机在线观看| or卡值多少钱| 乱人视频在线观看| 高清毛片免费看| 欧美三级亚洲精品| 香蕉av资源在线| 一级毛片我不卡| 亚洲av成人精品一区久久| 亚洲电影在线观看av| 精品午夜福利在线看| 亚洲人与动物交配视频| 一级毛片aaaaaa免费看小| 精品一区二区三区人妻视频| 在线免费观看的www视频| 一夜夜www| 午夜福利成人在线免费观看| 成年版毛片免费区| 美女黄网站色视频| 99久国产av精品国产电影| 国产精品电影一区二区三区| 亚洲中文字幕日韩| 男人舔女人下体高潮全视频| 性色avwww在线观看| 国产精品电影一区二区三区| 欧美一区二区精品小视频在线| 国产蜜桃级精品一区二区三区| 卡戴珊不雅视频在线播放| 九九爱精品视频在线观看| 免费看光身美女| 99久久中文字幕三级久久日本| 精品久久久久久久末码| 99热这里只有精品一区| 国产视频一区二区在线看| 91久久精品国产一区二区三区| 午夜精品国产一区二区电影 | 夜夜看夜夜爽夜夜摸| 美女大奶头视频| 午夜影院日韩av| 免费搜索国产男女视频| 一本精品99久久精品77| 悠悠久久av| 日韩成人av中文字幕在线观看 | 国产精品人妻久久久久久| 成人三级黄色视频| 色播亚洲综合网| 美女 人体艺术 gogo| 美女被艹到高潮喷水动态| 一进一出抽搐gif免费好疼| 搡老熟女国产l中国老女人| 我的老师免费观看完整版| 男女边吃奶边做爰视频| 极品教师在线视频| 亚洲一区二区三区色噜噜| 深爱激情五月婷婷| 老司机福利观看| av在线蜜桃| a级毛片免费高清观看在线播放| 最新在线观看一区二区三区| 伊人久久精品亚洲午夜| 免费电影在线观看免费观看| 能在线免费观看的黄片| 中文字幕久久专区| 亚洲激情五月婷婷啪啪| 成人特级av手机在线观看| 简卡轻食公司| 日韩一区二区视频免费看| 国产成人精品久久久久久| 日韩三级伦理在线观看| 久久九九热精品免费| 一本精品99久久精品77| 国产精品亚洲一级av第二区| 草草在线视频免费看| 综合色丁香网| 99久久成人亚洲精品观看| 你懂的网址亚洲精品在线观看 | 国产黄色视频一区二区在线观看 | 国产精品综合久久久久久久免费| 国产精品女同一区二区软件| 人妻久久中文字幕网| 精品不卡国产一区二区三区| 亚洲自偷自拍三级| 乱系列少妇在线播放| 日韩成人伦理影院| 自拍偷自拍亚洲精品老妇| 欧美zozozo另类| 日韩欧美国产在线观看| 亚洲欧美精品自产自拍| 中国国产av一级| 国产精品一二三区在线看| 国产熟女欧美一区二区| 成人美女网站在线观看视频| 精品福利观看| 国产精品无大码| 综合色av麻豆| 韩国av在线不卡| 国产免费男女视频| 亚洲精品日韩在线中文字幕 | 精品久久久久久久久久久久久| 国产伦在线观看视频一区| 国产免费一级a男人的天堂| 久久人人精品亚洲av| 免费高清视频大片| 夜夜爽天天搞| 99久国产av精品| 精品国内亚洲2022精品成人| 国产伦在线观看视频一区| 女同久久另类99精品国产91| 亚洲精品日韩在线中文字幕 | 午夜精品国产一区二区电影 | av天堂在线播放| av免费在线看不卡| 国产一区二区亚洲精品在线观看| 免费看美女性在线毛片视频| 别揉我奶头 嗯啊视频| 国产三级在线视频| 国产亚洲精品久久久com| 国产探花极品一区二区| 亚洲av成人av| 国产乱人偷精品视频| 神马国产精品三级电影在线观看| 一级毛片我不卡| 欧美激情国产日韩精品一区| 女生性感内裤真人,穿戴方法视频| 日本一本二区三区精品| 又黄又爽又刺激的免费视频.| 亚洲真实伦在线观看| 久久久色成人| 黄色一级大片看看| 久久人人爽人人爽人人片va| 最新在线观看一区二区三区| 插逼视频在线观看| 淫秽高清视频在线观看| 久久久久久久亚洲中文字幕| 婷婷色综合大香蕉| 久久精品国产亚洲网站| 国产极品精品免费视频能看的| av在线天堂中文字幕| av黄色大香蕉| 18禁黄网站禁片免费观看直播| 亚洲最大成人手机在线| 国产精品亚洲美女久久久| 长腿黑丝高跟| 亚洲天堂国产精品一区在线| 国产一区二区三区av在线 | 亚洲av美国av| 免费av毛片视频| 久久精品夜色国产| 精品一区二区三区视频在线观看免费| 亚洲七黄色美女视频| 中文字幕久久专区| 日本 av在线| 麻豆乱淫一区二区| 12—13女人毛片做爰片一| 一夜夜www| 久久人妻av系列| 久久欧美精品欧美久久欧美| 欧美zozozo另类| 国产精品人妻久久久久久| 男女做爰动态图高潮gif福利片| 欧美3d第一页| 亚洲av二区三区四区| 色综合站精品国产| 级片在线观看| 少妇人妻一区二区三区视频| 亚洲欧美清纯卡通| 国产白丝娇喘喷水9色精品| 成年女人永久免费观看视频| 99热这里只有是精品在线观看| 国产毛片a区久久久久| 欧美性猛交黑人性爽| 亚洲在线自拍视频| 一区福利在线观看| 一区福利在线观看| 毛片一级片免费看久久久久| 国产精品野战在线观看| 国产蜜桃级精品一区二区三区| 国产精品美女特级片免费视频播放器| 国产精品一区二区三区四区免费观看 | 精华霜和精华液先用哪个| 中文字幕熟女人妻在线| 在线看三级毛片| 国产白丝娇喘喷水9色精品| 日韩欧美一区二区三区在线观看| 人妻人人澡人人爽人人| 成人综合一区亚洲| 91aial.com中文字幕在线观看| 91在线精品国自产拍蜜月| 九九爱精品视频在线观看| 国产有黄有色有爽视频| 狂野欧美激情性xxxx在线观看| 人妻系列 视频| 一个人看视频在线观看www免费| 丰满人妻一区二区三区视频av| 狂野欧美激情性bbbbbb| 亚洲久久久国产精品| www.色视频.com| av女优亚洲男人天堂| 欧美日本中文国产一区发布| 日本wwww免费看| 熟女人妻精品中文字幕| 中国美白少妇内射xxxbb| 一级毛片 在线播放| 狂野欧美白嫩少妇大欣赏| 女性生殖器流出的白浆| 精品久久久久久久久av| 久久久久久久久久久丰满| 日韩不卡一区二区三区视频在线| 美女视频免费永久观看网站| 日本av免费视频播放| 免费看av在线观看网站| 日产精品乱码卡一卡2卡三| 亚洲国产色片| 男的添女的下面高潮视频| 水蜜桃什么品种好| 国产精品久久久久久久久免| 看十八女毛片水多多多| 黄色毛片三级朝国网站 | 街头女战士在线观看网站| 狂野欧美激情性bbbbbb| 午夜日本视频在线| 国产中年淑女户外野战色| 色网站视频免费| 毛片一级片免费看久久久久| 国产精品一区二区三区四区免费观看| 国产精品一区二区在线不卡| av专区在线播放| 九色成人免费人妻av| 久久久久久久亚洲中文字幕| 黑人高潮一二区| 99热这里只有是精品50| 国产男人的电影天堂91| 午夜免费观看性视频| 国产日韩一区二区三区精品不卡 | 一级黄片播放器| 国产亚洲5aaaaa淫片| 欧美 日韩 精品 国产| 极品人妻少妇av视频| 欧美97在线视频| 亚洲精品国产色婷婷电影| 久久精品国产亚洲av涩爱| 久久韩国三级中文字幕| av天堂中文字幕网| 少妇猛男粗大的猛烈进出视频| 女人久久www免费人成看片| 国产黄片视频在线免费观看| 97超碰精品成人国产| 欧美少妇被猛烈插入视频| 久久久精品免费免费高清| 夫妻午夜视频| 国产毛片在线视频| 91久久精品国产一区二区成人| 插逼视频在线观看| 女性被躁到高潮视频| 高清黄色对白视频在线免费看 | 欧美日本中文国产一区发布| 日本爱情动作片www.在线观看| 国产成人一区二区在线|