• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Comparison of Production-Triggering Strategies for Manufacturing Enterprises under Random Orders

    2021-11-26 03:43:42LongfeiZhouLinZhngYjunFng
    Engineering 2021年6期

    Longfei Zhou, Lin Zhng*, Yjun Fng

    a Computer Science and Artificial Intelligence Laboratory, Massachusetts Institute of Technology, Cambridge, MA 02139, USA

    b School of Automation Science and Electrical Engineering, Beihang University, Beijing 100191, China

    Keywords:

    ABSTRACT Although new technologies have been deeply applied in manufacturing systems, manufacturing enterprises are still encountering difficulties in maintaining efficient and flexible production due to the random arrivals of diverse customer requirements. Fast order delivery and low inventory cost are fundamentally contradictory to each other. How to make a suitable production-triggering strategy is a critical issue for an enterprise to maintain a high level of competitiveness in a dynamic environment.In this paper, we focus on production-triggering strategies for manufacturing enterprises to satisfy randomly arriving orders and reduce inventory costs. Unified theoretical models and simulation models of different production strategies are proposed, including time-triggered strategies, event-triggered strategies, and hybrid-triggered strategies. In each model, both part-production-triggering strategies and product-assembly-triggering strategies are considered and implemented. The time-triggered models and hybrid-triggered models also consider the impact of the period on system performance. The results show that hybrid-triggered and time-triggered strategies yield faster order delivery and lower inventory costs than event-triggered strategies if the period is set appropriately.

    1. Introduction

    The rapid development of sensor technologies and the Internet of Things enables manufacturing enterprises to perceive manufacturing resources and abilities more precisely by synchronizing their resource statuses with the data in their enterprise information systems [1–3]. From a global perspective, cloud-based technologies allow closer connections and easier collaborations between different manufacturing enterprises. Some cloud manufacturing service platforms have already been established to integrate and share the manufacturing resources from different enterprises in the form of manufacturing services [3]. Through these public platforms, enterprises are able to publish real-time information of their manufacturing resources and provide services as required by customers [4]. Meanwhile, more diverse customer requirements are collected on these platforms, which makes it more difficult for enterprises to create production plans to satisfy their diverse customers.

    The relationship between enterprises and customers is defined as the relationship between service providers and service demanders in a manufacturing service network consisting of a platform,a platform manager, service providers, and service demanders[5]. Any enterprises or individuals can be service demanders on the platform,as long as they are seeking suitable services to realize their manufacturing requirements. A company can become a service provider if its resources or services are allowed to be published on the platform and shared with other potential service demanders. The service manager on the platform is usually a big company that manages all the businesses on the whole platform.The service manager usually cares more about the outcomes and efficiency of the whole platform than about the production performance of a single company,whereas a single company cares more about its own production.The efficiency of the whole platform can often be measured by statistical metrics such as average production time,average service utilization rate,and average manufacturing costs.

    Some studies have focused on global optimization problems in a collaborative manufacturing service network, including service selection, service composition, and service scheduling problems in which optimization objectives, algorithms, and restrictions are considered[6].To organize and optimize manufacturing resources,a resource-selection strategy based on a distributed genetic algorithm has been proposed [7]. For three-dimensional (3D) printing services, a matching and selection strategy has been presented based on different attributes of 3D printing models in order to achieve a shorter service time [8]. A systematic method has been proposed to improve the energy efficiency of a multistage manufacturing system through production control [9]. In Ref. [10], a mathematical model and a method for logistics service selection were built to optimize the delivery time of products from manufacturers to demanders.Furthermore,a multi-level aggregate serviceplanning method has been proposed to deal with multi-granularity services and meet providers’requirements[11].In terms of service composition,Ref.[12]proposed a resource-service chain composition algorithm to cope with the temporal relationship.In Ref.[13],an empirical knowledge-oriented genetic algorithm is proposed to address the optimal service composition problem.The artificial bee colony algorithm was modified to handle conflicts between different objectives in service composition problems [14]. In terms of service scheduling, a scheduling method for 3D printing services was proposed in order to reduce the average task delivery time[15].A multi-task scheduling model was presented to consider task workload,service efficiency,and service quantity[16].In addition,scholars have studied the scheduling problems of logistics services[17] and dynamic service scheduling problems [18]. As real-time sensors and data assimilation technologies develop rapidly, an increasing amount of real-time data is available for discrete event simulation to achieve on-line simulation and decision-making[19,20]. A simulation model of a vehicle general assembly system was developed based on the event-scheduling simulation method[21]. The dynamic data-driven simulation method performs well in dealing with real-time manufacturing service scheduling problems[22,23].Few previous studies have explored different production strategies that allow a single enterprise to conduct suitable production planning in a collaborative manufacturing environment. However, each company always has its own goal, which is generally related to its own production performance.

    For manufacturing enterprises, it is an interesting problem to determine how to maintain a balance between low inventory cost and fast order delivery.It is valuable for manufacturing enterprises to find a better balance between their production time and inventory cost. On the one hand, if an enterprise wants to produce and deliver products as soon as possible, it needs to prepare enough parts and products in advance so that randomly arriving orders can be satisfied in time. But these prepared parts and products need to be stored in the inventory for days or even months,which inevitably leads to higher inventory costs.On the other hand,if an enterprise wants to reduce its inventory costs,a possible method is to start production only after receiving certain orders from the customers. However, this strategy may result in order delivery delay,which can decrease customer satisfaction. Just-in-time (JIT) and just-in-case(JIC)inventory management are two typical inventory management strategies.The core philosophy of JIT is for manufacturers to have a suitable inventory readily available to meet the current requirements,while reducing excess and thereby avoiding extra inventory costs[24].The JIT strategy requires manufacturers to predict demand accurately in order to reduce their inventory costs as much as possible [25]. In contrast, when using JIC strategies, manufacturers make sufficient parts and products and keep them in their inventories in order to meet as many customer orders as possible at any time.Therefore,JIT aims to reduce inventory costs while JIC aims to speed up order delivery.The problem of determining the amount and time of product purchase has been considered, while minimizing the sum of the logistics cost and material inventory cost [26].

    Previous studies have mainly focused on the qualitative analysis or data statistics of different production and inventory management systems. In this paper, we propose unified theoretical models and simulation models of different production strategies, including time-triggered strategies, event-triggered strategies, and hybridtriggered strategies. In addition,simulations of various production strategies are conducted based on these multiple simulation models in order to determine the impact of production-triggering strategies on inventory costs and order delivery time. More specifically, we providea mathematicalmodel of the production-triggering problem and propose multiple production-triggering strategies (i.e., timetriggered, event-triggered, and hybrid-triggered strategies). For each type of production-triggering strategy, we build the process models and run simulations to test its performance in terms of production time and inventory costs.

    Let X and r represent the number of order arrivals and the arrival rate of orders during a certain time, respectively. Assume that X ~ Pois(r), which means that X obeys the Poisson distribution.The simulation results show that time-triggered strategies and hybrid-triggered strategies obtain faster order delivery time and lower inventory costs than event-triggered strategies when a suitable time period (1/r) is chosen.

    The rest of this paper is organized as follows. In Section 2, we analyze the production process and provide a mathematical description of the problem. In Section 3, we propose three types of production-triggering strategies and build their simulation models.In Section 4,simulations are conducted to compare the performance of various production-triggering strategies. Finally,conclusions and further work are discussed in Section 5.

    2. Problem formulation

    2.1. Manufacturing service network

    The relationship between service providers and service demanders in a collaborative manufacturing environment can be described through a complex network of manufacturing supply and demand.Enterprises usually act as service providers,providing multiple types of manufacturing services based on their manufacturing resources and capabilities. Manufacturing services can be described using the service granularity model to represent the different levels of manufacturing services. The simplest services are called unit services;these are always provided by single manufacturing machines or tools. Multiple-unit services can be combined to form a complex service that can execute more complex manufacturing functions.In this paper,we consider a higher-level model of manufacturing services in which enterprises are encapsulated as single services whose inputs and outputs are respectively the customers’ orders and the completed products. This paper aims to study the impact of different production strategies inside enterprises on the performance of outputs for random input situations.

    On the one hand, a manufacturing service can usually execute multiple types of subtasks due to the flexibility of manufacturing services. For example, an enterprise might provide a computer numerical control(CNC)machining service,which is a very typical manufacturing service. This CNC machining service might support multiple machining tasks such as column, cone, sphere, thread,plane, groove, gear, and bore tasks. On the other hand, a specific subtask type can be executed by different manufacturing services,as different companies may compete to provide the same kind of services. Based on the above analysis, the mapping relationship between manufacturing services and subtasks is a many-to-many relationship.

    There are also different kinds of uncertainties,such as randomly arriving orders and random service breakdowns. Usually, the number of order arrivals during a unit of time basically obeys the Poisson distribution, Pois(r), where r is the arrival rate of orders.When an order arrives at the manufacturing platform,it is matched to a certain type of manufacturing service in the platform according to the type of order.

    Fig. 1 shows a simple collaborative manufacturing service network with two service demanders and two service providers. It can be seen that demander D1submits an order O1to the manufacturing platform,and the platform allocates this task to provider P2.Thus, a supply–demand relationship between provider P2and demander D1is built based on this match. Provider P2delivers the product of order O1to demander D1after finishing the production process of order O1.Also,demander D2submits its order O2to the platform,and the platform distributes O2to provider P1.Hence,a supply–demand relationship between provider P1and demander D2is also built through the manufacturing platform. Provider PP1delivers the product of order O2to demander D2after finishing the production process of O2.

    2.2. Production processes

    A production process can be briefly divided into several main steps including material input, part production, part storage,product assembly, and product storage. For an enterprise, orders from customers can be considered as the information input of the manufacturing system, while materials can be considered as the physical input. Materials come from upstream suppliers in the supply chain, while orders come from downstream customers in the supply chain.Products are the output of a manufacturing system for an enterprise.After the production process is completed,including part production and product assembly,the products are stored in the product warehouse;finally,they are delivered to customers.

    Fig. 1. A manufacturing service network with two service demanders and two service providers.

    Fig. 2 briefly presents the production process of an electronic assembly manufacturing enterprise from the materials (left side)to the products (right side). There are different material pools in the material warehouse for different types of material.In the electronic assembly manufacturing industry,materials mainly include printed circuit boards and electronic components. Materials are automatically delivered to part production lines when the manufacturing system starts the production process.On the part production lines,the materials are processed into different kinds of parts.Particularly for the electronic assembly industry, electronic components are mounted on printed circuit boards through surfacemount technology lines to manufacture different types of parts.The produced parts are then transported to the part inventory for future usage.The product assembly lines take out a certain number of parts from the part inventory and assemble them into products.After being assembled, the products are stored in the product inventory. Finally, the products are delivered to customers via logistics to complete the order.

    2.3. Mathematical description

    Given randomly arriving orders in a dynamic environment,it is necessary to choose a certain period of time to analyze.Let tsand terepresent the start time and end time, respectively, of the whole time of duration under study. Let Oirepresent the ith arriving order,which arrives at time Ai.After order Oiarrives,the manufacturing system is triggered by a triggering strategy, and the manufacturing system immediately starts to execute the production process for Oi. The products of Oiare produced after the manufacturing system finishes its whole production process,including part production and product assembly.

    2.3.1. Optimization objectives

    In this research, we mainly consider two optimization objectives of this problem: the order delivery time and the inventory occupation.Let Cirepresent the completion time of order Oi; then,the optimization objective of the order delivery time can be given by Eq. (1).

    Fig. 2. The basic production process of manufacturing enterprises.

    where N is the number of all arriving orders at the manufacturing system during time[ts,te),and the definition of N is given by Eq.(2).

    Therefore,the optimization objective of the order delivery time can also be written as shown in Eq. (3).

    The optimization objective of the inventory occupation includes both the part inventory and the product inventory. Let Ipart(t) and Iprod(t) represent the part inventory occupation and the product inventory occupation at time t,respectively.The average inventory occupation is calculated by dividing the total inventory occupation between time tsand teby (te- ts). Eqs. (4) and (5) provide the expressions for the average part inventory occupation and the average product inventory occupation, respectively.

    In practice, the order delivery time and the inventory costs are contradictory to each other. It is necessary to reconcile them and find a suitable balance point for each situation.

    2.3.2. Order arrival time distribution

    The number of order arrivals X in each time period obeys the same Pois(r) in all simulation models. Therefore, X ~ Pois(r), as shown by Eq. (6).

    where r is the arrival rate in the models,and is actually the average number of orders per time period.Let Birepresent the interval time between the arrival of Oiand the arrival of Oi-1. Then, Biis defined by Eq. (7).

    where A0= 0 and i ≥1. Biobeys the same exponential distribution Exp(r)in the simulation models,which is defined as Bi~Exp(r).The cumulative distribution function of Biis given by Eq. (8).

    Fig. 3 shows the detailed structure of the arrival time function block. The input and output of the arrival time function are the arrival rate and the arrival time, respectively. Each order arrival triggers the arrival time function;then the model obtains the arrival time of this order.In the simulations,we set the arrival rate r as 0.5 in multiple simulation models. When we run the simulations,orders from customers are generated randomly based on the arrival time function.

    3. Production-triggering strategies

    In a manufacturing service network, service providers need to dynamically adjust their production strategies according to system statuses such as order arrivals and service availability. A production-triggering strategy is one of the most important production strategies for a manufacturing enterprise. In this section,three types of production-triggering strategies are presented:time-triggered, event-triggered, and hybrid-triggered strategies.Let Tpart(i) represent the triggering time of the ith part, and use Tprod(j) to represent the triggering time of the jth product. A production-triggering strategy can therefore be fully defined by Tpart(i) and Tprod(j).

    3.1. Time-triggered strategies

    In mass-production mode, companies usually produce batches of parts and products periodically, according to production plans.Mass-production mode is a kind of time-triggered production strategy.In time-triggered production strategies,both the part production and the product-assembly process are periodically triggered by a certain time. In a time-triggered model, enterprises execute production according to a specific time period and do not consider order arrivals.Let τpartand τprodrepresent the triggering period of part production and the triggering period of product assembly, respectively. Time-triggered strategies are defined by the part-triggering time Tpart(i) and the product triggering time Tprod(i), which are shown by Eqs. (9) and (10).

    Fig. 4 illustrates a model of a time-triggered production strategy.At the beginning of the left side of the figure,there is a part trigger that triggers part production lines to execute the part production process. After parts have been completed by the part production lines, they are transported to the part store. The part store is followed by product assembly lines,which execute product assembly processes after every time period. After products are assembled by the product assembly lines, they are stored in the product store. Once there is a product matching an order in the product store, the matched product will be delivered to the customer for that order. The product delivery part executes the order-matching process and the product delivery process.

    Fig. 3. The arrival time function block in the simulation models.

    Fig. 4. A model of a time-triggered production strategy. FIFO: first in first out; n: number; d: departure; a: arrival.

    It can be seen that part production and product assembly are both triggered by a certain time period in a time-triggered production model, and do not depend on order situations. The part production lines produce a certain number of different types of parts during each time period.Each batch of parts is immediately deposited into the part warehouse after being completed. The product assembly lines also produce a certain number of products during each time period.The completed products are immediately deposited into product warehouses.

    Note that the time periods of part production and product assembly are usually different from each other, even within the same enterprise. These two time periods are usually related to the specific industries,product types,and production beats.In this model, products are delivered from product warehouses to customers when orders are received.If there are not enough products for one order,delivery services will wait until enough products are produced.Therefore,the production processes are not impacted by order arrivals. The production processes continue according to a certain time period, even when there are enough products stored in the warehouses; they will not speed up, even when there are not enough products in the warehouses.

    3.2. Event-triggered strategies

    In the personalized customized production mode, enterprises set up their production plans normally, based on event-triggered strategies;that is,the product scales and types are based on orders received from customers. In event-triggered production modes,part production processes are triggered by order arrivals. Let Tpart(i) represent the part-triggering time, as shown in Eq. (11).

    The product assembly process of order Oiis triggered only if at least one of the product assembly lines is available and there are no other parts ahead of Oiin the part inventory.Let Spart(i)and Sprod(i)represent the part production time and product assembly time of Oi, respectively.

    When i=1,the triggering time of product assembly for O1is the arrival time of O1plus the part production time Spart(1), which is defined by Eq. (12).

    When i ≥2,the triggering time Tprod(i)of the product assembly for Oiis defined in a recursive function, which is defined by Eqs.(13), (14), and (15).

    A model of an event-triggered production strategy is shown in Fig. 5. Unlike time-triggered production strategies, both the part production activities and the product assembly activities are triggered by specific events in an event-triggered production model.In particular, when an order arrives, a production plan for both the part production and product assembly is developed, based on the type and quantity of the order.Then part production lines start to produce corresponding parts according to the production plan.After the parts have been completed by the part production lines,they are transported to the part store. The part store is followed by the product assembly lines, which execute product assembly processes. After the products have been assembled by the product assembly lines,they are stored in the product store.Once there is a product matching an order in the product store, the matched product will be delivered to the customer for that order. The product delivery part executes the order-matching process and the product delivery process. It can be seen that warehouses in the eventtriggered model are always used to temporarily store parts and products.Once the product assembly line receives the part,assembly begins. Each product will be delivered to its customer through logistics once it has arrived at the product warehouses.

    3.3. Hybrid-triggered strategies

    Fig. 5. A model of an event-triggered production strategy.

    Fig. 6. A model of a hybrid-triggered production strategy. REL: release.

    A production model of hybrid-triggered production strategies is shown in Fig. 6. Unlike time-triggered production strategies and event-triggered production strategies, the part production processes in a hybrid-triggered production model are time-triggered,while the product assembly processes are event-triggered. In this model,the part production lines produce certain numbers of parts during each time period.The time period of part production is represented by Tpart(i), as shown in Eq. (16).

    Each batch of parts is stored in the part warehouses after being produced. Product assembly lines are triggered only by arriving orders from customers.When an order arrives,the product assembly lines request the needed parts and start production if there are enough parts in the part store to produce the required products.If there are not enough parts, the product assembly lines will wait until enough parts have been produced by the part production lines. In a hybrid-triggered strategy, the triggering time Tprod(i) of the product assembly for Oiis defined by Eq. (17), below, where α and β are defined by Eqs. (14) and (15), respectively.

    In the hybrid-triggered model, order arrivals do not impact the part production processes but do impact the product assembly processes. Product warehouses in the hybrid-triggered model are used to temporarily store products because all stored products are immediately delivered from the warehouses to the customers once they have been produced.

    4. Simulation

    To test the performance of these proposed strategies,we design different simulation experiments and investigate the impact of production-triggering strategies on the production performance under randomly arriving orders. We build simulation models for different triggering strategies and then run multiple simulations through SimEvents.

    4.1. Scenarios

    In this case study, there are five enterprises acting as different service providers in the manufacturing service network. We build five models for these five enterprises in order to run simulations.The simulation time for each model is set up to 1000 time periods.Some basic modules—such as part trigger, part production, part store, product assembly, product store, customers, order list, and product delivery—are included in each simulation model. The order arrival rates, part triggers, and product triggers for all simulation models are listed in Table 1.

    It is shown that Model-1, Model-2, and Model-3 are time triggered. However, the time periods of Model-1, Model-2, and Model-3 are different from each other,which is used to investigate the effect of time periods on production performance. Model-4 is hybrid triggered: The part production lines are triggered by time with a period of 2, while the product assembly lines are triggered by arrival orders. Model-5 is event triggered, so both the part production lines and the product assembly lines are triggered by arrival orders. There are two kinds of triggers in these simulation models: part triggers and product triggers. The part trigger is applied in the event-triggered model (Model-5), and the product trigger is applied in the hybrid-triggered model(Model-4).Product inventory capacities are set to 100 for all five production models.Part inventory capacities are set to ‘‘inf” (i.e., infinite) for all five production models.The number of arrival orders during the simulation is shown in Fig. 7.

    4.2. Results

    During the simulation, we count several kinds of data for each production model in order to compare the task delivery and inventory costs between different strategies. In terms of task delivery,we compare two indicators between these five production models:the number of orders in the waiting lists and the number of completed orders. In terms of inventory costs, we compare both the number of parts in the store and the number of products in the store between these five production models. Therefore, between the different production-triggering strategies, we compare four aspects: the number of orders in the waiting lists, the number of completed orders, the number of parts in the store, and the number of products in the store. The definitions of these evaluation metrics are given below:

    The number of orders in the waiting list is the number of orders in the order list in Figs. 4–6. The number of orders in the waiting list is actually the number of input orders(i.e.,the number of arriving orders submitted by customers) minus the number of completed orders (i.e., the number of completed products).

    The number of completed orders is the number of all orders that have been completed and delivered to the customers.This value is actually equal to the number of inputs of the terminator in Figs. 4–6. One order is considered to be completed only after a finished product has been matched with this order.

    The number of parts in the store is the number of parts in the part store in Figs. 4–6 at the current time. The number of parts in the store is equal to the number of produced parts from the partproduction lines minus the number of parts used for product assembly.

    Table 1 Parameter setting of the simulation models.

    Fig. 7. The number of submitted orders during the simulation.

    The number of products in the store is the number of products in the product store in Figs.4–6 at the current time.The number of products in the store is equal to the number of assembled products from the product production lines minus the number of products delivered to the customers according to orders.

    Fig. 8 shows a comparison of the results for the number of orders in the waiting lists over time between the five production-triggering models. It is shown that the numbers of orders in the waiting lists in the time-triggered (period = 1, period = 2) models and the hybrid-triggered model change much less than those in the time-triggered(period=3)model and the eventtriggered model during the simulation. The numbers of orders in the waiting lists in the time-triggered (period = 3) model and the event-triggered model reach 170 and 90, respectively, by the end of the simulation time (te= 1000 h). This result indicates that the numbers of orders in the waiting lists in the time-triggered (period = 1, period = 2) models and the hybrid-triggered model are convergent when the time is over, while those of the timetriggered (period = 3) model and the event-triggered model are not convergent.

    Fig. 8. A comparison of the numbers of orders in waiting lists between different productions modes.

    Fig. 9. A comparison of the numbers of completed orders between different production modes.

    Fig.9 shows a comparison of the results for the number of completed orders over time between the five production-triggering models.It is shown that the number of completed orders in all five production models increases continually from the beginning(ts= 0 h) to the end (te= 1000 h) of the whole simulation process.In terms of the number of completed orders, the shorter period time-triggered models (i.e., period = 1 and period = 2) and the hybrid-triggered model perform almost the same during the whole process.Sometimes(between t=500 h and t=600 h),the shortest time-triggered model(period=1)performs a little better than the time-triggered model(period=2)and the hybrid-triggered model.Both the longer period time-triggered model (period = 3) and the event-triggered model perform worse than the shorter period time-triggered models (period = 1, period = 2) and the hybridtriggered model in terms of the numbers of completed orders.

    Fig. 10 shows a comparison of the results for the number of parts in the inventory over time between the five productiontriggering models. It is shown that the numbers of parts in the inventory of all five models are almost always close to 0 from the beginning time (ts= 0 h) to time 600 (t = 600 h). From time 600(t=600 h)to the end time(te=1000 h),the time-triggered(period = 2, period = 3) models and the event-triggered model still keep close to a zero-part inventory.However,the number of parts in the inventory of the hybrid-triggered model exhibits waves after t=600 h.Furthermore,the number of parts in the inventory of the time-triggered(period=1)model increases rapidly after t=600 h.Hence, the time-triggered (period = 2, period = 3) models and the event-triggered model perform very well in terms of the performance of the part inventory, while the performance of the hybrid-triggered model is reasonable,although not ideal;however,the performance of the time-triggered (period = 1) model is very poor.

    Fig. 10. A comparison of the numbers of parts in the inventory between different production modes.

    Fig. 11 shows a comparison of the results for the number of products in the inventory over time between the five productiontriggering models. It is shown that the time-triggered (period = 2,period = 3) models, the hybrid-triggered model, and the eventtriggered model perform excellently, although the time-triggered(period = 2) model exhibits small waves from t = 650 h to t = 950 h. Compared with the other four models, the performance of the time-triggered(period=1)model is very poor in terms of the product inventory.The number of products in the inventory of the time-triggered (period=1) model reaches its maximum inventory capacity value of 100 (as defined in Section 4.1) at time t = 600.

    4.3. Discussion

    The simulation results illustrate that the production period is a key factor in the time-triggered production strategies. In such strategies, order arrivals are not considered when the enterprises make production plans. In this research, the order arrival rate r in the simulation models is set as 0.5. Hence, the expectation of the number of order arrivals per unit time is 1/r=2.When the periods τpartand τprodof the time-triggered strategies are set to 2(e.g.,Model-2), the model performs well in terms of both the order delivery time and the inventory occupancy,as shown in the simulation results.When τpart=1 and τprod=1(e.g.,Model-1),the timetriggered model performs well in terms of the order delivery time,but the part inventory occupancy and product inventory occupancy are much higher than those of the other strategies,as shown in Figs. 10 and 11. When τpart= 3 and τprod= 3, as in Model-3, the time-triggered model exhibits a good performance in terms of the inventory occupancy, but the number of delivered orders during the same time is much less than those of the other strategies, as shown in Figs. 8 and 9, meaning that the model exhibits a longer than average order delivery time.

    The event-triggered production strategy has the lowest inventory occupancy, which leads to the lowest inventory costs, as shown in Figs. 10 and 11. However, the event-triggered strategy has a much longer order delivery time than the time-triggered strategies (period = 1, period = 2) and the hybrid-triggered strategy, although it is slightly better than the time-triggered strategy (period = 3) as shown in Figs. 8 and 9.

    Fig. 11. A comparison of the numbers of products in the inventory between different production modes.

    The hybrid-triggered strategy yields satisfactory order delivery times.Although there are some local fluctuations,the strategy generally performs satisfactorily. Moreover, the hybrid-triggered strategy performs well in terms of both the part inventory occupancy and the product inventory occupancy. Especially in terms of the product inventory, the hybrid-triggered strategy exhibits the best performance, as shown by Fig. 11. Therefore, the hybrid-triggered production strategy is a wise choice for balancing the order delivery time and the inventory costs.

    In summary, if the order arrival times align with the Poisson distribution Pois(r), then manufacturing enterprises in a manufacturing service network should choose the hybrid-triggered strategy or a time-triggered strategy with a period τ=1/r because these two production strategies perform well in terms of both the order delivery time and the inventory costs. Applying either of these two strategies provides a good balance between the order delivery time and the production costs.Both time-triggered strategies with a period τ > 1/r and the event-triggered strategy yield low inventory costs but have a long order delivery time, which results in lower customer satisfaction. The time-triggered strategies with a period τ < 1/r show good performance in terms of short-order delivery time,but occupy a great deal of the inventory during production processes.

    5. Conclusions

    Focusing on the production-triggering problem in a dynamic collaborative manufacturing environment, we proposed three types of production-triggering strategies for manufacturing enterprises under randomly arriving orders: time-triggered, eventtriggered, and hybrid-triggered strategies. Simulation models of these three production-triggering strategies were built and simulated in order to investigate their performance in terms of order delivery time and inventory costs. In addition, for the timetriggered and hybrid-triggered strategies, we changed the period in order to study the effect of the period on system performance.The simulation results showed that:①The hybrid-triggered strategy and the time-triggered strategy with a period τ= 1/r show better performance in terms of both the order delivery time and the inventory costs than the other strategies; ②the time-triggered strategies with a period τ > 1/r and the event-triggered strategy have lower inventory costs but a longer order delivery time; and③the time-triggered strategies with a period τ<1/r exhibit better performance in terms of order delivery time but poor performance in terms of inventory costs.

    One possible future work is to design more detailed production models in terms of production processes and mapping relationships between part types and product types. Another direction is to study more complex manufacturing service networks, such as cloud manufacturing and social manufacturing environments.

    Acknowledgement

    This work is supported by the National Key R&D Program of China (2018YFB1701600), and the National Natural Science Foundation of China (61873014).

    Compliance with ethics guidelines

    Longfei Zhou,Lin Zhang,and Yajun Fang declare that they have no conflict of interest or financial conflicts to disclose.

    五月伊人婷婷丁香| 国产成人a区在线观看| 亚洲美女搞黄在线观看 | 精品久久久噜噜| 美女被艹到高潮喷水动态| 欧美潮喷喷水| 三级国产精品欧美在线观看| 免费电影在线观看免费观看| 国产亚洲精品久久久com| 免费看日本二区| 亚洲无线观看免费| 2021天堂中文幕一二区在线观| 精品人妻视频免费看| 欧美精品国产亚洲| 午夜福利视频1000在线观看| 日韩欧美国产在线观看| 老熟妇乱子伦视频在线观看| 国产av在哪里看| 有码 亚洲区| 精品欧美国产一区二区三| 久久久久久久久久久丰满| 亚洲欧美日韩东京热| 日本五十路高清| 国产一区二区激情短视频| 国内精品宾馆在线| 中文字幕久久专区| 国产伦在线观看视频一区| 欧美最新免费一区二区三区| 丰满的人妻完整版| 中文字幕av成人在线电影| 国产不卡一卡二| 国产私拍福利视频在线观看| 国产一区亚洲一区在线观看| 亚洲内射少妇av| 欧美性猛交╳xxx乱大交人| 色播亚洲综合网| 高清毛片免费观看视频网站| 国产片特级美女逼逼视频| 最新在线观看一区二区三区| 午夜福利成人在线免费观看| 亚洲欧美日韩高清在线视频| 久久亚洲国产成人精品v| 国语自产精品视频在线第100页| 亚洲,欧美,日韩| 中文亚洲av片在线观看爽| eeuss影院久久| 国产黄色小视频在线观看| 亚洲一区高清亚洲精品| 亚洲色图av天堂| 欧美bdsm另类| 国产精品久久视频播放| 国产色婷婷99| 久久久午夜欧美精品| 97在线视频观看| 三级毛片av免费| 天堂av国产一区二区熟女人妻| 日本成人三级电影网站| 亚洲av成人av| 99热6这里只有精品| 麻豆一二三区av精品| 国产爱豆传媒在线观看| 超碰av人人做人人爽久久| 久久99热6这里只有精品| 欧美日韩国产亚洲二区| 91av网一区二区| 一个人免费在线观看电影| 免费看av在线观看网站| 亚洲av二区三区四区| 成人国产麻豆网| 免费人成视频x8x8入口观看| 中文字幕免费在线视频6| 少妇熟女aⅴ在线视频| 亚洲欧美日韩无卡精品| 在线观看午夜福利视频| 黄色欧美视频在线观看| 嫩草影视91久久| 久久久久久大精品| 亚洲欧美日韩高清专用| 天天躁日日操中文字幕| 国产不卡一卡二| 高清日韩中文字幕在线| 国产一区二区三区在线臀色熟女| 国产乱人视频| 日韩制服骚丝袜av| 国产淫片久久久久久久久| 日日摸夜夜添夜夜添小说| 精品一区二区三区视频在线观看免费| av免费在线看不卡| 最后的刺客免费高清国语| 国产在线精品亚洲第一网站| 一区二区三区高清视频在线| 美女xxoo啪啪120秒动态图| 最近的中文字幕免费完整| 99精品在免费线老司机午夜| 村上凉子中文字幕在线| 亚洲高清免费不卡视频| 人妻丰满熟妇av一区二区三区| 高清午夜精品一区二区三区 | 亚洲精品粉嫩美女一区| 国产真实乱freesex| 联通29元200g的流量卡| 亚洲成人精品中文字幕电影| 插阴视频在线观看视频| 啦啦啦观看免费观看视频高清| 日日摸夜夜添夜夜添av毛片| 精品国产三级普通话版| 给我免费播放毛片高清在线观看| 小蜜桃在线观看免费完整版高清| 女同久久另类99精品国产91| 国产一区二区亚洲精品在线观看| 欧美丝袜亚洲另类| 国内精品一区二区在线观看| 国产精品久久久久久精品电影| 波多野结衣高清作品| 久久久国产成人免费| 午夜免费男女啪啪视频观看 | 国产视频内射| 亚洲色图av天堂| 久久中文看片网| 一本一本综合久久| 国产成人freesex在线 | 中文字幕av在线有码专区| 亚洲第一区二区三区不卡| 国产成人福利小说| 91精品国产九色| 国产免费男女视频| 久久久成人免费电影| 亚洲av免费高清在线观看| 天堂av国产一区二区熟女人妻| 国产免费男女视频| 亚洲av成人精品一区久久| 22中文网久久字幕| 日韩成人av中文字幕在线观看 | 99热网站在线观看| 丝袜美腿在线中文| 桃色一区二区三区在线观看| 国产 一区 欧美 日韩| 99久久九九国产精品国产免费| 国产成人精品久久久久久| 美女大奶头视频| 日本精品一区二区三区蜜桃| 午夜亚洲福利在线播放| 国产黄色视频一区二区在线观看 | 91久久精品国产一区二区三区| 久久午夜福利片| 成年女人毛片免费观看观看9| 国产高清三级在线| 国语自产精品视频在线第100页| 午夜福利在线在线| 69人妻影院| 国产麻豆成人av免费视频| 久久精品国产亚洲网站| 亚洲精品成人久久久久久| 97超视频在线观看视频| 搡老妇女老女人老熟妇| 久久精品国产亚洲网站| 美女被艹到高潮喷水动态| av在线蜜桃| 九九热线精品视视频播放| 久久精品国产亚洲网站| 欧美潮喷喷水| 永久网站在线| 国产精品一及| 亚洲婷婷狠狠爱综合网| 国产单亲对白刺激| 真实男女啪啪啪动态图| 日本成人三级电影网站| 久久久久久伊人网av| 日韩av在线大香蕉| 99热这里只有精品一区| 日本熟妇午夜| 免费看光身美女| 国产一级毛片七仙女欲春2| 久久久成人免费电影| 一个人免费在线观看电影| 午夜激情福利司机影院| 国产av一区在线观看免费| 天天一区二区日本电影三级| 日韩精品青青久久久久久| 国产男人的电影天堂91| 免费观看的影片在线观看| 色尼玛亚洲综合影院| 伦理电影大哥的女人| avwww免费| 国产黄色小视频在线观看| 日本黄色片子视频| 中国美白少妇内射xxxbb| 日韩av不卡免费在线播放| 国国产精品蜜臀av免费| 亚洲国产色片| 国产色婷婷99| 麻豆久久精品国产亚洲av| 日韩欧美一区二区三区在线观看| 淫秽高清视频在线观看| 最近的中文字幕免费完整| 老女人水多毛片| 女人被狂操c到高潮| 国产熟女欧美一区二区| 中国国产av一级| 亚洲不卡免费看| 精品人妻偷拍中文字幕| 久久久久九九精品影院| 精品少妇黑人巨大在线播放 | 你懂的网址亚洲精品在线观看 | 99久久精品热视频| 干丝袜人妻中文字幕| av.在线天堂| 18禁在线播放成人免费| 可以在线观看毛片的网站| 欧美日韩精品成人综合77777| 亚洲高清免费不卡视频| 精品少妇黑人巨大在线播放 | 亚洲成人中文字幕在线播放| 精品人妻熟女av久视频| 波野结衣二区三区在线| 听说在线观看完整版免费高清| 国产91av在线免费观看| 97碰自拍视频| 久久国内精品自在自线图片| 久久亚洲国产成人精品v| 3wmmmm亚洲av在线观看| 两个人视频免费观看高清| 午夜激情欧美在线| 亚洲中文日韩欧美视频| 蜜臀久久99精品久久宅男| 18禁在线播放成人免费| 欧美色视频一区免费| 欧美bdsm另类| 日韩av在线大香蕉| 又爽又黄a免费视频| 不卡一级毛片| 久久精品久久久久久噜噜老黄 | 人人妻人人看人人澡| 麻豆久久精品国产亚洲av| 天堂√8在线中文| 免费人成视频x8x8入口观看| 亚洲欧美精品综合久久99| 欧美人与善性xxx| 男女啪啪激烈高潮av片| 丰满乱子伦码专区| 久久久久性生活片| 日本熟妇午夜| 国产高清激情床上av| 日韩欧美精品免费久久| 乱码一卡2卡4卡精品| 国产亚洲精品久久久久久毛片| 搡女人真爽免费视频火全软件 | 久久精品国产鲁丝片午夜精品| 久久久久国产精品人妻aⅴ院| 婷婷色综合大香蕉| 性色avwww在线观看| 啦啦啦韩国在线观看视频| 国产精品综合久久久久久久免费| 黑人高潮一二区| 三级毛片av免费| 亚洲最大成人中文| 国产一区二区三区在线臀色熟女| 国产大屁股一区二区在线视频| 人人妻,人人澡人人爽秒播| 成人无遮挡网站| 欧美人与善性xxx| 有码 亚洲区| 一级av片app| 亚洲国产精品合色在线| 亚洲真实伦在线观看| 在线观看美女被高潮喷水网站| 日本黄色片子视频| 亚洲国产精品合色在线| 黄片wwwwww| 在线观看美女被高潮喷水网站| 婷婷精品国产亚洲av在线| 丰满人妻一区二区三区视频av| 亚洲av免费高清在线观看| 日韩欧美国产在线观看| 国产三级中文精品| 国产美女午夜福利| 亚洲,欧美,日韩| 国产精品免费一区二区三区在线| 校园人妻丝袜中文字幕| 日本三级黄在线观看| av.在线天堂| 最近视频中文字幕2019在线8| 麻豆乱淫一区二区| 国产探花极品一区二区| 亚洲精品日韩av片在线观看| 久久综合国产亚洲精品| 如何舔出高潮| 在线a可以看的网站| АⅤ资源中文在线天堂| 桃色一区二区三区在线观看| 黄色一级大片看看| 亚洲一级一片aⅴ在线观看| 最近的中文字幕免费完整| 免费看光身美女| 我的女老师完整版在线观看| 在线免费十八禁| 久久久久久久久久成人| 久久精品国产自在天天线| 高清毛片免费观看视频网站| 精品久久久久久久人妻蜜臀av| 午夜福利在线在线| 卡戴珊不雅视频在线播放| 久久久a久久爽久久v久久| 欧美又色又爽又黄视频| 卡戴珊不雅视频在线播放| 国内精品久久久久精免费| 欧美日本亚洲视频在线播放| 日日摸夜夜添夜夜爱| 日韩大尺度精品在线看网址| 亚洲欧美日韩无卡精品| 一本久久中文字幕| 午夜视频国产福利| 亚洲欧美成人综合另类久久久 | 成人漫画全彩无遮挡| 成人鲁丝片一二三区免费| 在现免费观看毛片| 久久久久久久久久久丰满| 亚洲欧美精品自产自拍| 国产国拍精品亚洲av在线观看| 欧美成人一区二区免费高清观看| 国产色爽女视频免费观看| 午夜福利在线在线| 天天躁日日操中文字幕| 成人一区二区视频在线观看| 亚洲av中文av极速乱| 亚洲精品影视一区二区三区av| 亚洲精品乱码久久久v下载方式| 小说图片视频综合网站| a级毛片a级免费在线| 极品教师在线视频| 夜夜看夜夜爽夜夜摸| 欧美一区二区亚洲| 国产 一区 欧美 日韩| 亚洲精品一区av在线观看| 中国美女看黄片| 少妇的逼水好多| 久久久成人免费电影| 国产中年淑女户外野战色| av天堂中文字幕网| 有码 亚洲区| 日韩大尺度精品在线看网址| 天堂动漫精品| 久久人妻av系列| 亚洲av.av天堂| 亚洲第一电影网av| www.色视频.com| 国产精品永久免费网站| 高清日韩中文字幕在线| 亚洲人成网站高清观看| 亚洲精品色激情综合| 99热这里只有精品一区| 日韩人妻高清精品专区| 天天躁日日操中文字幕| 赤兔流量卡办理| 国产男靠女视频免费网站| 亚洲av一区综合| 又爽又黄a免费视频| 人人妻,人人澡人人爽秒播| 一区二区三区免费毛片| 波多野结衣巨乳人妻| 免费av毛片视频| 最新在线观看一区二区三区| 久久精品91蜜桃| 亚洲欧美日韩卡通动漫| 久久久精品大字幕| 国产一区二区在线观看日韩| 精品人妻熟女av久视频| 亚洲精品一卡2卡三卡4卡5卡| 亚州av有码| 成熟少妇高潮喷水视频| 国产高清视频在线播放一区| 亚洲精品影视一区二区三区av| 国产欧美日韩精品一区二区| 久久亚洲精品不卡| 午夜激情福利司机影院| 日本黄色视频三级网站网址| 亚洲aⅴ乱码一区二区在线播放| 99精品在免费线老司机午夜| 菩萨蛮人人尽说江南好唐韦庄 | 中文资源天堂在线| 日韩成人av中文字幕在线观看 | 亚洲高清免费不卡视频| 高清午夜精品一区二区三区 | 午夜久久久久精精品| 草草在线视频免费看| 欧洲精品卡2卡3卡4卡5卡区| 高清日韩中文字幕在线| 欧美一级a爱片免费观看看| 长腿黑丝高跟| 国产伦精品一区二区三区四那| 哪里可以看免费的av片| 亚洲精华国产精华液的使用体验 | 少妇熟女欧美另类| 欧美日韩在线观看h| 韩国av在线不卡| 午夜影院日韩av| 99热全是精品| 欧美日韩精品成人综合77777| 又爽又黄无遮挡网站| 搡老岳熟女国产| 亚洲av电影不卡..在线观看| 日日撸夜夜添| 男女那种视频在线观看| 97在线视频观看| 免费av观看视频| 我要搜黄色片| 亚洲av二区三区四区| 午夜老司机福利剧场| 国产一级毛片七仙女欲春2| 简卡轻食公司| 久久人人精品亚洲av| 中出人妻视频一区二区| avwww免费| 又爽又黄a免费视频| 亚州av有码| 日韩一区二区视频免费看| 亚洲内射少妇av| 国产精品人妻久久久久久| 国产精品女同一区二区软件| 久久鲁丝午夜福利片| 六月丁香七月| 麻豆久久精品国产亚洲av| 三级毛片av免费| 国产精品无大码| 乱系列少妇在线播放| 国产高清不卡午夜福利| 人妻制服诱惑在线中文字幕| 搞女人的毛片| 亚州av有码| 直男gayav资源| 午夜福利在线在线| 久久九九热精品免费| 黄色一级大片看看| 嫩草影院精品99| 亚洲七黄色美女视频| 午夜视频国产福利| 国产亚洲91精品色在线| 尤物成人国产欧美一区二区三区| 网址你懂的国产日韩在线| 欧美一区二区亚洲| 99热精品在线国产| 精品乱码久久久久久99久播| 中文字幕免费在线视频6| 亚洲欧美日韩无卡精品| 久久精品国产亚洲网站| 久久热精品热| 亚洲国产色片| 不卡一级毛片| 99riav亚洲国产免费| 欧美不卡视频在线免费观看| 免费看美女性在线毛片视频| 在线国产一区二区在线| 成人特级av手机在线观看| 免费观看精品视频网站| 丰满人妻一区二区三区视频av| 老司机福利观看| 亚洲国产精品sss在线观看| 国产亚洲欧美98| 亚洲自拍偷在线| 老司机午夜福利在线观看视频| 熟女电影av网| 国产亚洲av嫩草精品影院| 你懂的网址亚洲精品在线观看 | 69人妻影院| 九九爱精品视频在线观看| 日韩av不卡免费在线播放| 99久国产av精品国产电影| 亚洲成人av在线免费| 欧美激情在线99| 亚洲天堂国产精品一区在线| 成人综合一区亚洲| 看非洲黑人一级黄片| 久久久久性生活片| 22中文网久久字幕| 最近手机中文字幕大全| av福利片在线观看| 毛片一级片免费看久久久久| 日韩精品中文字幕看吧| 欧美性猛交黑人性爽| 免费观看精品视频网站| 黑人高潮一二区| 99热这里只有是精品50| 亚洲一级一片aⅴ在线观看| 真实男女啪啪啪动态图| 99久久中文字幕三级久久日本| 精品久久久久久成人av| ponron亚洲| 精品人妻熟女av久视频| 成人毛片a级毛片在线播放| 插阴视频在线观看视频| 成人特级黄色片久久久久久久| 亚洲av熟女| 少妇熟女aⅴ在线视频| 嫩草影院新地址| 人人妻人人看人人澡| 国产精品三级大全| 青春草视频在线免费观看| 国产高清视频在线观看网站| 老女人水多毛片| 国产精品一及| 十八禁国产超污无遮挡网站| 丰满人妻一区二区三区视频av| 欧美极品一区二区三区四区| 婷婷色综合大香蕉| 国产精品永久免费网站| 国产精品国产三级国产av玫瑰| 最近最新中文字幕大全电影3| 99久久中文字幕三级久久日本| 国产综合懂色| 久久人人爽人人爽人人片va| 赤兔流量卡办理| 观看美女的网站| 国产白丝娇喘喷水9色精品| 一级毛片我不卡| 身体一侧抽搐| 午夜激情福利司机影院| 国产真实伦视频高清在线观看| 国产v大片淫在线免费观看| 久久99热这里只有精品18| 黄色欧美视频在线观看| 淫秽高清视频在线观看| 日韩在线高清观看一区二区三区| 深爱激情五月婷婷| 色综合色国产| 最近手机中文字幕大全| 日韩人妻高清精品专区| 欧美中文日本在线观看视频| 午夜影院日韩av| 亚洲精品乱码久久久v下载方式| 色综合亚洲欧美另类图片| 啦啦啦观看免费观看视频高清| 国产国拍精品亚洲av在线观看| 国产精品一区www在线观看| 亚洲美女黄片视频| 国产精品久久电影中文字幕| 高清日韩中文字幕在线| 欧美潮喷喷水| 综合色丁香网| 精品不卡国产一区二区三区| 好男人在线观看高清免费视频| 国产爱豆传媒在线观看| 女人被狂操c到高潮| 日韩精品有码人妻一区| 色尼玛亚洲综合影院| www.色视频.com| av在线老鸭窝| АⅤ资源中文在线天堂| 久久久欧美国产精品| 日韩成人av中文字幕在线观看 | 久久精品国产亚洲av香蕉五月| 女的被弄到高潮叫床怎么办| 国产 一区精品| 一卡2卡三卡四卡精品乱码亚洲| 精华霜和精华液先用哪个| 日本在线视频免费播放| 一进一出好大好爽视频| 天堂网av新在线| a级毛片a级免费在线| 久久久欧美国产精品| 一夜夜www| 亚洲av五月六月丁香网| 一本久久中文字幕| 国产乱人视频| 成人二区视频| avwww免费| 久久久久久久亚洲中文字幕| 国产一区二区激情短视频| 国产亚洲精品av在线| 欧美激情在线99| 全区人妻精品视频| 久久午夜亚洲精品久久| 中文字幕av成人在线电影| 性欧美人与动物交配| 国产一区二区在线观看日韩| 国产大屁股一区二区在线视频| 国产精品,欧美在线| 国产探花在线观看一区二区| 综合色丁香网| 成人特级黄色片久久久久久久| 亚洲欧美中文字幕日韩二区| 免费看a级黄色片| 久久国内精品自在自线图片| 精品人妻偷拍中文字幕| 久久精品国产清高在天天线| 天堂影院成人在线观看| 久久中文看片网| 免费一级毛片在线播放高清视频| 精品一区二区免费观看| 十八禁国产超污无遮挡网站| 国产成人福利小说| 伦精品一区二区三区| 免费人成视频x8x8入口观看| 精品不卡国产一区二区三区| 亚洲国产色片| 美女免费视频网站| 亚洲人成网站高清观看| 黄色视频,在线免费观看| 少妇熟女aⅴ在线视频| 国产成人影院久久av| 99久久久亚洲精品蜜臀av| 国产日本99.免费观看| 22中文网久久字幕| 国产亚洲欧美98| www日本黄色视频网| 久久久久久久久久久丰满| 日韩三级伦理在线观看| 真人做人爱边吃奶动态| 最近中文字幕高清免费大全6| 欧美高清成人免费视频www| 欧美zozozo另类| 麻豆久久精品国产亚洲av| 少妇人妻精品综合一区二区 | 国产色爽女视频免费观看| 久久久精品94久久精品| 看免费成人av毛片|