• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Insights into the regulation mechanism of ring-shaped magnetoelectric energy harvesters via mechanical and magnetic conditions?

    2021-10-28 07:15:52YangShi師陽NiLi李妮andYongYang楊勇
    Chinese Physics B 2021年10期
    關鍵詞:楊勇

    Yang Shi(師陽) Ni Li(李妮) and Yong Yang(楊勇)

    1School of Mechano-Electronic Engineering,Xidian University,Xi’an 710071,China

    2Research Center for Applied Mechanics,Xidian University,Xi’an 710071,China

    Keywords: magnetoelectric effect,boundary conditions,magneto-elastic coupling,external stimuli

    1. Introduction

    The emerging industrial revolution involves the internet of things(IoT),which is the key technology for enabling smart cities.[1]However, although this technology would promote innovation in society, as we would create a network between everything and realize remote distance control of electronic devices,some challenges exist in bringing the IoT to fruition.For example,this concept assumes the very wide implementation of distributed electronic devices to capture data,[2,3]each of which will require energy to run. Batteries in various forms are currently the primary power source for operating these devices. Despite many advantages,batteries are not the ultimate solution because they require periodic replacement or recharging. One of the promising solutions to these issues is harvesting ambient forms of energy,much of which would otherwise be wasted, to power the sensors. Among the various sources of energy,magnetic field is an attractive alternative source because they are available in most of the locations where the wireless sensor networks will be used.

    Recently, laminate magnetoelectric (ME) composites,formed by elastically combining piezoelectric and magnetostrictive materials, have been demonstrated as a potential choice for harvesting magnetic signals due to strong strain-mediated ME coupling.[4–6]In the ME effect, an electric field or voltage through the piezoelectric effect is resulted from the mechanical strain induced by an external magnetic field. The strength of the ME coupling in laminated composites depends mainly on the intrinsic property of components,[7]interfacial mechanical coupling,[8–10]and the boundary conditions.[11]Up to date,various investigations have been performed to achieve higher ME coupling coefficient by selecting magnetostrictive and piezoelectric components with excellent properties.[12,13]On the other hand,a great deal of researches have been devoted to further enhance ME coefficient via varying the configuration of ME composites.[14,15]Among various configurations, the diskring, ring-shaped and cylindrical composites show considerable advantages due to improved interfacial mechanical coupling. Unlike the conventional laminated plate or beam, the ring-shaped or cylindrical structures can transfer normal stress instead of shear stress via interface and thus improve the interfacial mechanical coupling.[16]In addition,some advanced fabrication methods, such as electro or electroless depositions,have been successfully used in preparing the ring-shaped composites.[17]This can eliminate the use of epoxy bonding layer or electrodes, and is thereby believed to be advantageous. Wanget al.[8,18]theoretically revealed that ME effect can be substantially enhanced by increasing the curvature of a piezoelectric/piezomagnetic cylinder, and an imperfect interface can annul small unwanted resonance for better device operation. Gao and Zhang[19]modeled the nonlinear ME coupling of a giant magnetostrictive/piezoelectric composite cylinder based on a standard square constitutive model. Most recently, Kumar and Arockiarajan[20]presented an analytical ME model in a cylindrical coordinate system incorporating the temperature effects on the individual composite constituents.These theoretical models have significantly contributed to the theory of ME effect in ring-shaped structures.

    Nearly, all prior works on ring-shaped ME composites focused on studying ME coupling with consideration of an open-circuit condition, thus they can only apply for sensing applications rather than harvesters. For the energy harvester using ring-shaped composites,however,the power conversion performance has not got enough attention. There are still considerable difficulties and challenges in the practical application of the ring-shaped magnetic energy harvester. Initially,it has been indicated that available ME effect can be observed only when the intrinsic frequency of structure closes to the frequency of ambient magnetic field.[21–23]However,the magnetic fields from the wireless sensor networks always have random distributions of frequency components, which makes it difficult to match the frequencies of the harvester and ambient magnetic field. Therefore, exploring new regulation mechanism of ME performance becomes one of important issue to be addressed. Mechanical boundary conditions may directly influence the strain distribution in the ring-shaped composites,and improve the performance of energy harvester. The insight into the ME coupling under different mechanical boundary conditions is currently lacking in any of the above mentioned references nor available in the state-of-the-art literature.Moreover,the material parameters(i.e.,elasticity modulus and piezomagnetic coefficient) of magnetostrictive materials are very sensitive to the external stimuli like bias magnetic and stress loadings.[24–28]This enables a new theoretical mechanism for tunable or active manipulation of ME performance of the energy harvester.[29]However, the nonlinear coupled effects of such external stimuli on ME coupling of the ringshaped composites have not been well investigated since most of the theoretical models were established using linear constitutive relations of constituent materials.

    The objective of this paper is to model ring-shaped ME energy harvesters and to reveal regulation mechanism via mechanical and bias magnetic conditions. The theoretical model for the energy harvesters based on ring-shaped ME composites is established and the basic equations are introduced in Section 2. Then analytical solutions for the ME coupling in ring-shaped composites and nonlinear field-dependent material parameters are derived in Section 3. In Section 4,some results are presented for tuning the ME performance via boundary conditions and external stimuli. Finally,some conclusions are made in Section 5.

    2. Problem description

    Figure 1 shows a magnetic energy harvester based on a ring-shaped ME composite. The ME composite is presumed to be assembled from an outer piezoelectric ring concentric to an inner magnetostrictive cylinder. Taking into account the symmetry of the cylindrical structure,a cylindrical coordinate system(r,?,z)is adopted, in which the coordinate directionr,?andzwill be designated as 1,2 and 3,respectively,so that the tensor coefficients can keep the same values in a cylindrical coordinate system as those in a Cartesian system. The piezoelectric material is polarized alongzdirection and magnetostrictive material is magnetized along the same direction.Herea,bandcare radiuses as denoted in Fig.1. The ambient ac magnetic field alongzdirection could induce a mechanical strain from the magnetostrictive phase that transfers to the piezoelectric phase via interfacial coupling. Then a change in polarization of the piezoelectric phase results from piezoelectric effect, which is expected to be harvested by an external resistanceRl. Note that in practical applications, the postprocessing electric circuit is very crucial for ME harvesters.Adequate power management circuits have to be applied in electromagnetic energy harvesting to produce appropriate supply performance. In the current work we intend to study clearly how mechanical and magnetic conditions affects ME coupling. Thus,only one-load electric circuit[30,31]is considered,which,however,may not hinder us from evaluating and comparing ME performance under different stress and magnetic loadings. As the height of the cylindrical structure is assumed to be much less than its radius in the current analysis,the only nonzero components of the stress tensor areσrrandσ??. Since for the harmonic motion, all the fields have the same time dependence exp(jωt). This factor will be dropped in the analysis. For macro-scale magneto-electro-elastic media,both flexo-effect and surface effect can be neglected.[32,33]In a cylindrical coordinate system(r,?,z),when such media were operated under the conditions that the body force, free charge density and current density are absent, the mechanical governing equations for the dynamics of the axisymmetric cylindrical ring can be expressed as[34]whereuris radial displacement, andρis the effective mass density of the ring-shaped composites.

    Fig.1. Schematic diagram of magnetic energy harvester based on ringshaped ME composites.

    The linear constitutive equations for the stress tensorpσi jand the electric displacementD3in the piezoelectric layer,and stress tensorsmσijin the magnetostrictive layer can be written in terms of displacement as follows:

    where the left superscriptspandmrepresent piezoelectric and magnetostrictive layers,respectively;ci jkl,eij,di j,anda33are elastic,piezoelectric,piezomagnetic,and dielectric constants,respectively;E3andH3are the components of electric field and magnetic field,respectively.

    3. ME coupling in ring-shaped composites

    3.1. General solutions for mechanical variables

    For solving mechanical variables,we substitute the above constitutive equations into Eq. (1), and rewrite the governing equation in the form of

    whereAiandBiare the integration constants determined from interfacial and boundary conditions.J1(·) andY1(·) are the first and second kind Bessel functions. The stresses and electric displacement in the composites are then obtained with combining the above solutions and constitutive relations.

    3.2. Mechanical interfacial and boundary conditions

    Since the thickness of the interfacial layer caused from adhesives may be very thin compared to the composites, the interface can be classified as a bonding layer-free interface.Thus, perfect interfacial conditions are considered in this study,given by

    Some conventional boundary conditions are listed in Table 1, which include stress-free and clamping (zero displacement) separately on the inner and outer radii of the magnetostrictive and piezoelectric layers,respectively. Note that one of the great advantages of the ring-shaped structure is that one can apply normal stress on the inner and outer boundaries,without the concern of interface failure caused by shear stress.In the current study,we propose new mechanical conditions by applying stressP0on the inner radii of magnetostrictive layer or the outer radii of piezoelectric layer. These mechanical conditions can be realized by assembling a concentric cylinder (annulus) with proper dimensions to the ME composites at inner(outer)boundary,since radical direction stress may be produced at boundaries via strong compression. As listed in Table 2, the proposed stress boundary conditions differ from those used in the overwhelming majority of existing analytical models.[19,35]The introduction of these conditions provides a utility for tuning the stress distribution in the composites,hence tuning the overall performance of the magnetic energy harvester. This highlights the first novelty of this study while accounting for possible practical operation issues.

    Table 1. List of stress-free and clamping boundary conditions and their mechanical interpretations.

    Table 2. List of applying stress boundary conditions and their mechanical interpretations.

    Substituting the expressions of the stress tensor and the displacements into the above mechanical interfacial and boundary conditions leads to eight equation sets with respect toAiandBi. These equation sets are then solved for unknown constants and the induced displacements in piezoelectric phase under different conditions can be determined.

    3.3. Analytical solutions for electrical variables

    In this section,the induced electrical variables are solved.It can be predicted from the above process that the displacement in piezoelectric phase has linear relations with the induced electric field, the applied magnetic field, and external stress applied at the boundaries. For convenience, the displacementpuris rewritten as

    The magnetic field harvester schematically displayed in Fig. 1 is operated under closed circuit with a resistanceRl.The induced ME voltage is denoted asVME.Combining Ohm’s law and the integral form of Gauss’s law, we can reach the following relation:

    Then using the expression of the electric displacement and considering the relation between the electric field and the voltage,we obtain the expression of the induced ME voltage under closed-circuit condition,given as

    Note that our solutions can also be used to predict the ME effect of ring-shaped composites used as magnetic sensors under open-circuit condition. In this case,the only change is setting the right part of Eq.(8)(i.e.,the induced current)to be zero. That is,Rl→∞yields equation that determines the open-circuit ME voltage as follows:

    Hence the ME voltage coefficientαMEand the output power densitypis obtained as

    whereIis the output current,and the operation Re is for taking the real part of a complex number.

    3.4. Nonlinear constitutive theory for magnetostrictive materials

    The solutions given in the above section is based on the linear constitutive relations of magnetostrictive materials.That is,material parameters of magnetostrictive materials,such as elastic tensor and piezomagnetic coefficient tensor,are considered as constants under fixed pre-stress and bias magnetic field. However, most magnetostrictive materials exhibit a complex nonlinear magneto-elastic coupling,[36–38]i.e., the material properties are significantly affected by the pre-stress and bias magnetic field. Considering the magneto-elastic coupled characteristic may result in some nonlinear ME behaviors,and set up new theoretical mechanism for tuning ME performance of the energy harvester. The nonlinear constitutive relations have been explored extensively and proposed on the basis of the Gibbs free energy function as follows:[39]

    wheresis the compliance coefficient tensor,Mis the magnetization tensors,Iis the second-rank unit tensor,λsandMsare the saturated magnetostriction and magnetization,kis relaxation factor,μ0is vacuum permeability, andf(x) is the Langevin function. The termε(σ,M) represents the magnetostriction related to magneto-elastic coupling. Readers can refer to Ref.[24]for the more detailed expressions ofs,ε(σ,M)and ˉσ.

    Let us consider now the ME energy harvester response to a combined magnetic fieldH=Hdc+h(f), whereHdcis the applied bias field andh(f)is ac magnetic field. Upon expanding the strains as a Taylor series in the vicinity of the applied biasHdc,we obtain

    Note here that the above linear-like form is fully magnetoelastic coupled since all the material parameters are strictly derived from the nonlinear magneto-elastic coupling constitutive relations. In order to unify the nonlinear and linear relations in form,the relation in Eq.(14)can be rearranged as

    Fig.2. (a)Elastic compliance coefficient and(b)piezomagnetic coefficient of Terfenol-D versus magnetic field under different pre-stresses.

    4. Results and discussions

    In this section, numerical calculations are performed for the ring-shaped composites and some significant predictions are presented based on our model. The piezoelectric material is chosen as BaTiO3, and the magnetostrictive materials for linear and nonlinear cases are chosen as CoFe2O4and Terfenol-D, respectively. The material parameters used for numerical calculations are listed in Tables 3 and 4.[44,45]The volume fraction of the piezoelectric phase is defined byv=(c?b)/(c?a). The inner and outer radii of the ring are fixed ata=9 mm andc=13 mm, respectively. The ac field isHac=1 Oe, the resistance isRl=50 k?, and the volume fraction isv=0.5. For studying the resonance ME coupling,a damping coefficientχis used to describe resonance loss.The damping coefficient is determined byχ=1/Q=?f/fr,whereQis the quality factor for the observed resonance,fris resonance frequency,and ?fis the bandwidth. Wanet al.[15]experimentally obtained the effective quality factor of~48 for the first bending resonance and~51 for the first longitudinal resonance, indicatingχ=0.02 may be believable in numerical calculation. Zhanget al.[46]and Zhaoet al.[47]also usedχ=0.02 to evaluate the resonance ME effects in multiferroic laminates plates and cylinders. In the current study,ω′=(1+0.02i)ωis taken into account in the numerical calculation.

    Table 3. Material parameters of BaTiO3 and CoFe2O4.

    Table 4. Material parameters of Terfenol-D.

    4.1. Model degeneration and validation

    It is noteworthy that the theoretical model in the above sections is established for ring-shaped structures,which,however, can be degenerated into the model for disk/ring structures. In the configurations of disk/ring structures, a piezoelectric disk is inserted into a magnetostrictive ring (denoted by P/M),or a magnetostrictive disk is inserted into a piezoelectric ring(denoted by M/P).Unlike the ring-shaped structures,the inner radiusaof the disk/ring structures is set to be zero,and the displacement at the center of disk should not be infinite,i.e.,one of the undetermined coefficients in Eq.(5)must be zero. Recently, the dynamic ME response of a Terfenol-D disk/PZT ring has been well reported experimentally by Li and Chen.[48]Here, we compare the predicted ME effects of Terfenol-D disk/PZT ring with experimental data in Ref.[48],and plot the open-circuit ME coefficient as a function of the driving frequency in Fig.3. Note that for the results presented in Fig.3,the inner diameter,the outer diameter,and the thickness are 10 mm,12 mm,and 0.95 mm,respectively. It may be observed that the proposed scheme is able to capture both the maximum ME coefficient and the resonance frequency. The two sets of results are in very close agreement,indicating that the theoretical model is sufficiently accurate for characterization of dynamic ME effect.

    Fig. 3. ME coefficient of Terfenol-D disk/PZT ring with varying the driving frequency.

    4.2. Regulation mechanism via mechanical boundary conditions

    The results presented in Fig. 4 report the ME voltage of ring-shaped energy harvester versus the driving frequency of magnetic field for both conventional and stress boundary conditions listed in Tables 1 and 2. The results for conventional boundary conditions are calculated by setting the applied stressP0in Eq. (9) to zero. Since the type of boundary conditions dictates the distribution of displacement field throughout the composite,the induced ME voltages under different boundary conditions change variously. For some of the conventional boundary conditions (i.e., F-F, F-C, and CF),two obvious resonance frequencies are obtained within the range of 0–1400 kHz,as shown in Fig.4(a). In addition,setting a stress-free condition makes it easy to induce a resonance response at low frequency, while setting a clamped condition is beneficial for tuning a larger resonance frequency. Thus,the condition F-F corresponds to the lowest resonance frequency,whereas the condition C-C to the largest one. Except for the type of boundary condition, the location at which a specific condition is applied may affect the transfer of displacement from one layer to the other, and therefore matters. It can be found that setting the outer boundary stress-free may result in notable ME coupling at a lower frequency. For example,the maximum ME voltages for F-F and C-F conditions are achieved at the fundamental frequency, while the F-C condition shows notable ME voltage at the second-order frequency.The expression in Eq.(9)indicates that ME voltage is significantly related to the displacements at the outer boundaryr=cand the interfacer=b. Thus,the effect of boundary condition on ME coupling is twofold. First, the type of boundary condition changes the radial displacement at the outer boundary.For example, the conditions F-C and C-C dictate a zero displacement at the outer boundary. Second,the solutions of the undetermined coefficients in Eq.(9),determined by the values and types of boundary conditions,will indirectly affect the displacement at the interface through the solutions of two Bessel differential equations. Based on these mechanisms, ME performance of the proposed ring-shaped energy harvester may be tuned by optimizing the prescribed value of the displacement on the boundaries.

    In the current theory,when the stress boundary conditions are applied,the only operation is to replace the zero stress by a nonzero one for a boundary. In other words, relaxing the conditions S-F or F-S from applied stress to stress-free results in the condition F-F. Similarly, the corresponding stress-free condition for S-C and C-S are F-C and C-F,respectively.Comparing Figs.4(a)and 4(b),we find that applying stress can improve ME voltage,without changing the resonance frequency of the corresponding conditions. The peak ME voltages and resonance frequencies under different boundary conditions are summarized in Fig.5. As can be seen, the peak ME voltages under conventional boundary conditions are significantly enhanced by applying stress at the free boundary. For example,the peak ME voltage under the condition F-F is increased from 0.63 to 1.80 V after applying a 6-kPa stress at the outer boundary. In essence, piezoelectric effect is improved by the additional mechanical strain when at least one of boundaries is subjected to applied stress,resulting in the enhanced output voltage.

    Fig.4. ME voltage of ring-shaped energy harvester versus the driving frequency of magnetic field for(a)conventional and(b)stress boundary conditions(P0=6 kPa).

    Figure 6 shows the ME voltage versus the driving frequency with varying the applied stress under different boundary conditions. For all the stress boundary conditions,the results with a zero stress reduce to those for the corresponding conventional conditions. It can be seen that as the stress increases,ME voltage is improved continually,demonstrating a monotonically increase. However, it should be noted that in actual operation the applied stress may be properly increased,always assuming that its valueP0should not exceed the allowable stress[σ]of constituent materials. The present model shows that the effect of stress boundary conditions on ME coupling is also twofold. First, once a stress is applied at inner or outer free boundary,it influences the solutions of displacement in Eq.(5)by changing the values of undetermined coefficientsAiandBi,In other words,stress boundary condition will change the strain distributions in the composites,and thus may improve both piezoelectric and piezomagnetic effects. Second,the applied stress increases the second term in the numerator of Eq. (9), and thereby additional voltage is directly obtained via the improved piezoelectric effect. Equation(9)also suggests that ME performance can be enhanced,only with the displacement related to stress boundary condition being of the same sign as that related to the applied magnetic field. This provides a theoretical guidance for a specific operation.

    Fig. 5. Maximum ME voltages and the corresponding response frequencies under different boundary conditions(P0=6 kPa).

    Figure 7 shows the output power density versus resistance under different boundary conditions. For any boundary condition, a maximum power density is obtained at an optimal resistanceRo. The optimal resistances are different for different conventional conditions. As is expected,peak power densities for conventional conditions F-F,F-C,and C-F are enhanced by applying stress at the original stress-free boundaries. Interestingly,but not surprisingly,the optimal resistance is unchanged after setting the applied stress. The peak power densities,and the corresponding optimal resistances and resonance frequencies are summarized in Fig. 8. The C-C boundary condition,being the one that sets the displacements at both boundaries to zero,may give rise to the stress built up in the composite,and thus exhibits notable ME performance. In addition,when the composite is constrained at least on one side, the optimal resistance appears to be reduced and the resonance frequency be increased. Consequently,ME harvester under the C-C boundary condition exhibits the maximum power density with the minimum optimal resistance and highest resonance frequency.In comparison, a remarkable fact is that the C-S boundary condition reduces the resonance frequency for the C-C boundary condition by about 40%with almost unchanging the peak power density at a larger optimal resistanceRo=15 k?.In all,there is still much room for improvement in ME performance since the applied stress in Fig.8 is only 6 kPa,which is far less than the allowable stress of constituent materials.

    Fig.6. ME voltage versus the driving frequency for different boundary conditions: (a)C-S,(b)S-C,(c)F-S,and(d)S-F.

    Fig.7. Output power density versus resistance for different boundary conditions: (a)C-S,(b)S-C,(c)F-S,and(d)S-F.

    Fig.8.Maximum power densities and the corresponding optimal resistances for different boundary conditions(P0=6 kPa).

    4.3. Regulation mechanism via multi-field stimuli

    In this section, we intend to study the nonlinear multifiled coupled mechanisms of ME energy harvester and tune ME performance via external stimuli. Experiments have demonstrated that a typical giant magnetostrictive material Terfenol-D exhibits strong magnetostrictive effect and complex nonlinear coupling characteristics when it is subjected to combined stress and magnetic loadings. Therefore, we select Terfenol-D as the magnetostrictive phase of the ringshaped composites and expect to obtain some novel phenomena. The material parameters used for numerical calculations are listed in Table 4. Unless otherwise mentioned,the applied pre-stress is fixed atσ0=?10 MPa. Figure 9 displays the ME voltage versus the applied bias magnetic field for different frequencies. Note that the results presented in Fig. 8(a)include ME voltages of Terfenol-D/BaTiO3using nonlinear model and CoFe2O4/BaTiO3using linear model. It can be seen that the ME voltage predicted from linear model is independent of the applied bias field at any frequency. However,when the nonlinear multi-field coupling of Terfenol-D is taken into account in the nonlinear model,an interesting phenomenon happens. That is, the ME voltage firstly increases and then decreases with bias magnetic field, indicating that an optimal bias field may be used to tune ME performance of the ring-shaped composites. This highlights the second novelty of this study while accounting for active control of ME energy harvesters. Generally, ME composites need to be operated at an external bias magnetic field for available ME response since piezomagnetic effect vanishes at zero field. This,however,inevitably increases the excess energy consumption.Most of the conventional ME composites used a pair of electromagnets to produce bias magnetic fields,because it is convenient to adjust the magnitude of bias field. However, the electromagnets may cause an increase in the complexity of the device and a compromise in the performance. In the current study we present a simple and effective way to design a self-biased ME energy harvester. Four pieces of plate-shaped NdFeB magnets are arranged in the 0°, 90°, 180°, and 270°directions in a ring-shaped aluminum mold cavity of dimensions the same as the magnetostrictive ring so as to create a bias magnetic field. With the NdFeB magnets in place, the Terfenol-D short fibers are aligned and then the epoxy is transferred into the mold. Therefore, a magnetically biased magnetostrictive composite ring is successfully fabricated. Based on the proposed nonlinear theoretical model,the optimal bias fields for different application scenarios can be accurately predicted in advance. Then,the precise static magnetic field may be produced by choosing NdFeB magnets with proper dimensions.It can be seen from Fig.9(a)that at comparatively lower frequencies only one peak appears in the ME voltage versus bias field curve of Terfenol-D/BaTiO3. As the frequency increases, the peak position moves slightly toward higher bias field, and the ME coupling effect is enhanced considerably.According to the interfacial conditions in Eq.(6),the termuHin Eq.(7)is proportional to(equivalent)piezomagnetic coefficient. Thus, we can deduce from Eq. (7) that ME voltage should be also proportional to the(equivalent)piezomagnetic coefficient. The solutions for nonlinear material parameters in section 3.4 show that the equivalent piezomagnetic coefficient depends strongly on the applied bias field. That is why ME voltage is markedly affected by the bias field. Essentially,the peak position of ME voltage corresponds to the optimal bias filedHoptat which the maximum value of the equivalent piezomagnetic coefficient of Terfenol-D occurs. Figure 9(a)also indicates that low frequency has a slight effect on theHopt. At frequencies from 400 to 430 kHz, the curve of ME coefficient varying with bias field exhibits a dual-peak phenomenon,namely,two peaks appear with the increase of bias field. A similar dual-peak phenomenon was recently experimentally observed in laminated ME composites by Zhaoet al.[49]and our group.[50]With increasing the frequency, the first peak moves toward lower bias field while the second one toward higher bias field. For example,the first peak appears at 216 Oe forf=400 kHz,and 76 Oe forf=430 kHz,respectively; the second peak appears at 560 Oe forf=400 kHz,and 896 Oe forf=430 kHz,respectively. At the same time,both the first and second peaks are reduced by increasing frequency. Since the dual-peak phenomenon appears at larger frequency and the optimal field corresponding the second peak is changed, we deduce that the origin and mechanism of this phenomenon may be related to both the frequency of ac field and the magnitude of bias field. To validate this, ME voltage versus the driving frequency is plotted in Fig.10,with the bias field being set at previously specified ones,i.e.,560,680,788,and 896 Oe, which are the values of the optimal fields at frequencies of 400, 410, 420, and 430 kHz, respectively. When the bias field is fixed, the ME voltage maximizes at a certain frequency due to the mechanical resonance of the ring-shaped composites under ac magnetic field. This indicates a one-toone correspondence between the resonance frequency and the bias field we call it the required field. It should be noted that the resonance frequency and the required field in Fig. 10 coincide exactly with those in Fig.9(b). Meanwhile,the second peak of ME voltage in Fig.9(b)at a fixed bias field are exactly the same as the peak ME voltage in Fig. 10 at the same bias field. Therefore,it has been proved that the occurrence of the second peak is caused by the resonance under a certain value of magnetic field. Equation (16) reveals that variation of the equivalent elastic coefficient with external bias field,known as?Eeffect,[51,52]may lead to the resonance frequency change with the bias field. That is why the peak ME voltage and the resonance frequency in Fig. 10 changes with the bias field.Based on this mechanism,a much broader range of resonance frequencies is expected to be achieved.

    Fig.9. ME voltage versus the applied bias magnetic field for different frequencies:(a)100,130,160,and 190 kHz,and(b)400,410,420,and 430 kHz(σ0=?10 MPa).

    Fig. 10. ME voltage versus the driving frequency at a bias magnetic field of 560,680,788,and 896 Oe.

    Figure 11 displays the ME voltage versus the applied bias magnetic field for different pre-stresses. As pre-stress increases,the first peak increases with the optimal field moving slightly toward right, while the second peak reduces with the required field moving toward right. Thereby, available ME coupling may be realized within a wide bias field. By way of example,the ME voltage withσ0=?10 MPa reaches 70%of the second peak when the bias field is in the range from 156 to 560 Oe. The variation of the optimal(required)fields and the peaks are plotted in Fig. 12. It can be seen that each keeps a linear relation with the external pre-stress,offering much convenience for tuning ME performance of the proposed energy harvester.

    Fig.11. ME voltage versus the applied bias magnetic field for different pre-stresses(f =400 kHz).

    Fig.12. The peak values and the corresponding optimal bias fields versus pre-stress:(a)the first peak,and(b)the second peak(f =400 kHz).

    Lastly,we study the effects of pre-stress on the resonance of the composites. Figure 13 shows the ME voltage versus the driving frequency for different pre-stresses. At a lower bias field(100 Oe),ME voltage is enhanced by increasing tensile stress, with the resonance frequency being reduced. On the contrary,the ME voltage is weakened by increasing compressive stress,with the resonance frequency being increased.However,at a high bias field(500 Oe),the ME voltage is improved via reducing tensile stress or increasing compressive stress, with the resonance frequency being reduced. This indicates that a critical bias field may occur, below and above which the effects of pre-stress on the peak ME voltage and the resonance frequency are completely opposite. This critical bias field is actually the same as the optimal field corresponding to extreme point of the equivalent coefficient of Terfenol-D.

    Fig. 13. ME voltage versus the driving frequency for different prestresses: (a)Hdc=100 Oe,and(b)Hdc=500 Oe.

    Figure 14 shows the contour plots of the peakME v oltage and resonance frequency as functions of pre-stress and bias field. The results presented further validate the different change laws of peak ME voltage and resonance frequency with the pre-stress at different bias magnetic fields. When the bias field is lower than 200 Oe,the peak ME voltage is reduced as pre-stress increases from?60 to 0 MPa. However, a nonmonotone variation is observed when the bias field exceeds 200 Oe. As a consequence, the maximum peak occurs in the region of (?30 MPa<σ0240 Oe). Figure 14(b)indicates that a broad range of resonance frequencies is obtained to be 385–425 kHz by coordinately control external pre-stress and magnetic stimuli.It is expected that the range of resonance frequencies can be further broadened by adjusting bias magnetic field. The critical bias filed for resonance frequency is about 275 Oe,below which the latter monotonically increases with pre-stress, or above which firstly reduces and then increases. Therefore, the predicted nonlinear behaviors under external stimuli build a new theoretical mechanism for tunable control of ME energy harvesters.

    Fig.14. Contour plots of(a)the peak ME voltage and(b)the resonance frequency as functions of pre-stress and bias field.

    5. Conclusions

    In summary, we have proposed a theoretical model for studying ME coupling of energy harvesters using ring-shaped composites, with introducing a new type of boundary conditions as well as considering the multi-field coupled material’s properties. This model can be applied to predict output ME voltage, resonance frequency and power density of applications including energy harvesting and sensing under external stimuli. By utilizing the theoretical model, some important conclusions can be drawn as follows:

    (1)Setting a stress-free condition at any boundary is beneficial for inducing mechanical resonance,and thereby the F-F boundary condition corresponds to the lowest resonance frequency and more harmonics within the range of frequencies(0–1400 kHz)investigated.

    (2)Clamped conditions on the inner and outer boundaries may give rise to the stress built up in the composite,and thus improve the maximum power density. Once the composite is constrained at least on one side,the optimal resistance reduces and the resonance frequency increases.

    (3)Stress boundary conditions strengthen strain distribution, and enhance ME coupling significantly, without changing the corresponding resonance frequency and optimal resistance. The applied stress in actual operation may be properly increased on the premise that its valuePshould not exceed the allowable stresses of constituent materials.

    (4) A theoretically revealed dual-peak phenomenon around resonance frequencies demonstrates the occurrence of two optimal bias fields corresponding to the strong ME coupling. The linear relation between pre-stress and the optimal bias field offering much convenience for tuning ME performance within a wide field range.

    (5) The peak ME voltage is increased from 1.4 to 3.2 V with applying proper pre-stress and bias field. A broad range of resonance frequencies can be obtained from 385 to 425 kHz by tuning pre-stress from 0 to 60 MPa and bias field from 100 to 400 Oe. It is expected that the mutual coordination of the applied bias magnetic field and pre-stress promotes commonly the improvement of ME performance.

    The present theoretical model provides more options for optimizing ME performance of ring-shaped composites via mechanical and magnetic conditions. Nonlinear coupling properties revealed in this paper may result in an emerging revolution for tunable, active, or even smart control of ME harvesters. In addition,the current modeling idea may be applied to solve nonlinear multi-field coupling problem of other smart materials and structures.

    猜你喜歡
    楊勇
    楊勇
    Activated dissociation of H2 on the Cu(001)surface:The role of quantum tunneling
    楊勇書法作品
    大型房企違約對金融部門的影響
    楊勇:我們是人民的勤務兵,不是官老爺
    Angular dependence of vertical force and torque when magnetic dipole moves vertically above flat high-temperature superconductor?
    Quantum nature of proton transferring across one-dimensional potential fields?
    凡人光陰
    牡丹(2021年5期)2021-03-19 13:28:03
    故鄉
    牡丹(2020年3期)2020-03-02 02:20:17
    家庭百事通(2017年9期)2017-09-11 07:28:52
    久久99精品国语久久久| 亚洲av熟女| 欧美最黄视频在线播放免费| 中文欧美无线码| 亚洲成av人片在线播放无| 日本在线视频免费播放| 国产一级毛片在线| 校园春色视频在线观看| 国产精品久久久久久久久免| 特大巨黑吊av在线直播| 秋霞在线观看毛片| 插阴视频在线观看视频| 少妇裸体淫交视频免费看高清| 欧美日韩乱码在线| 国模一区二区三区四区视频| 欧美成人a在线观看| videossex国产| 岛国在线免费视频观看| 欧美xxxx黑人xx丫x性爽| 狠狠狠狠99中文字幕| 一级二级三级毛片免费看| 国产精品国产三级国产av玫瑰| 黄片wwwwww| 99久久精品热视频| 精品久久久久久久久亚洲| 最好的美女福利视频网| 神马国产精品三级电影在线观看| 女同久久另类99精品国产91| 久久亚洲国产成人精品v| 女人被狂操c到高潮| 麻豆精品久久久久久蜜桃| 色综合站精品国产| 亚洲一级一片aⅴ在线观看| 免费观看a级毛片全部| 久久久久国产网址| 成人永久免费在线观看视频| 国产精品蜜桃在线观看 | 国产午夜精品久久久久久一区二区三区| 91久久精品电影网| av天堂中文字幕网| 亚洲国产日韩欧美精品在线观看| 午夜精品一区二区三区免费看| 国产大屁股一区二区在线视频| 国产色婷婷99| 在线国产一区二区在线| 国产午夜福利久久久久久| 亚洲成人精品中文字幕电影| 久久精品国产亚洲av香蕉五月| 国产伦精品一区二区三区视频9| 婷婷色综合大香蕉| 久久久久久伊人网av| 丰满人妻一区二区三区视频av| 少妇被粗大猛烈的视频| 久久精品人妻少妇| 夜夜看夜夜爽夜夜摸| 在线天堂最新版资源| 亚洲av二区三区四区| 少妇熟女aⅴ在线视频| 国产伦在线观看视频一区| 精品少妇黑人巨大在线播放 | 国产午夜精品论理片| h日本视频在线播放| 免费看av在线观看网站| 欧美极品一区二区三区四区| 天堂影院成人在线观看| 在线播放国产精品三级| 国产大屁股一区二区在线视频| 国产精品永久免费网站| 午夜福利成人在线免费观看| 久久精品夜色国产| 国产在视频线在精品| 中文字幕免费在线视频6| 色尼玛亚洲综合影院| 真实男女啪啪啪动态图| 十八禁国产超污无遮挡网站| 国产综合懂色| 国产又黄又爽又无遮挡在线| 欧美高清性xxxxhd video| 国产av一区在线观看免费| 最近最新中文字幕大全电影3| 99热精品在线国产| 日韩在线高清观看一区二区三区| 午夜视频国产福利| 日日摸夜夜添夜夜添av毛片| 国产精品一区二区三区四区免费观看| 亚洲经典国产精华液单| 国产探花极品一区二区| 色尼玛亚洲综合影院| 麻豆乱淫一区二区| 99热这里只有是精品在线观看| 麻豆精品久久久久久蜜桃| 成人二区视频| 中文字幕人妻熟人妻熟丝袜美| 大又大粗又爽又黄少妇毛片口| 看黄色毛片网站| 成人永久免费在线观看视频| 国产精品国产高清国产av| 99久久九九国产精品国产免费| 国产成人精品一,二区 | 人妻制服诱惑在线中文字幕| 亚洲国产日韩欧美精品在线观看| 国产色婷婷99| 日本一本二区三区精品| 精品久久久久久久久久久久久| 亚洲国产精品国产精品| 亚洲人成网站在线播| 国产精品电影一区二区三区| 久久久久国产网址| 国产精品一区二区三区四区免费观看| 日本成人三级电影网站| 国产黄片美女视频| 变态另类成人亚洲欧美熟女| 国产精品久久久久久久电影| 日韩人妻高清精品专区| 国产 一区精品| 婷婷色综合大香蕉| 日日撸夜夜添| 精品午夜福利在线看| 久久久久久大精品| 欧美性感艳星| 给我免费播放毛片高清在线观看| 亚洲人与动物交配视频| 夜夜夜夜夜久久久久| 热99re8久久精品国产| 色视频www国产| 91精品国产九色| 国产在视频线在精品| 亚洲欧美成人精品一区二区| 国产老妇女一区| 久久久午夜欧美精品| 免费av毛片视频| 我要搜黄色片| 久久精品国产亚洲网站| 亚洲图色成人| 国产亚洲av片在线观看秒播厂 | 亚洲国产精品sss在线观看| 国产一区亚洲一区在线观看| 淫秽高清视频在线观看| 性插视频无遮挡在线免费观看| 国产老妇伦熟女老妇高清| 中文字幕制服av| 91狼人影院| 精品一区二区三区人妻视频| 国产成年人精品一区二区| 成人午夜高清在线视频| 91精品国产九色| kizo精华| 久久精品人妻少妇| 日韩三级伦理在线观看| 精品免费久久久久久久清纯| 简卡轻食公司| 高清在线视频一区二区三区 | 成人亚洲精品av一区二区| 欧美日韩国产亚洲二区| 国产成人精品久久久久久| 国产伦精品一区二区三区视频9| 我要搜黄色片| 在线免费十八禁| 老师上课跳d突然被开到最大视频| 亚洲无线观看免费| 国产乱人视频| 淫秽高清视频在线观看| 非洲黑人性xxxx精品又粗又长| 国产日韩欧美在线精品| 成人特级黄色片久久久久久久| 精品午夜福利在线看| 嫩草影院入口| 婷婷色av中文字幕| 波多野结衣巨乳人妻| 亚洲一区二区三区色噜噜| 少妇丰满av| 少妇裸体淫交视频免费看高清| 久久精品夜色国产| 亚洲在线观看片| 一个人看的www免费观看视频| 国产片特级美女逼逼视频| 国模一区二区三区四区视频| 国产中年淑女户外野战色| 蜜桃久久精品国产亚洲av| 99久久九九国产精品国产免费| 人人妻人人澡欧美一区二区| 久久久精品欧美日韩精品| 国产精品一区www在线观看| 中文字幕久久专区| 国产免费一级a男人的天堂| 国产亚洲91精品色在线| 亚洲四区av| 精品人妻一区二区三区麻豆| 美女脱内裤让男人舔精品视频 | 国产一区二区在线av高清观看| 亚洲av免费高清在线观看| 国产日韩欧美在线精品| 国产伦精品一区二区三区四那| 黄色配什么色好看| 2021天堂中文幕一二区在线观| 91麻豆精品激情在线观看国产| 久久久久久伊人网av| 青青草视频在线视频观看| 国产黄色小视频在线观看| 国产黄色视频一区二区在线观看 | 午夜久久久久精精品| 白带黄色成豆腐渣| 婷婷色综合大香蕉| 亚洲熟妇中文字幕五十中出| 精品一区二区三区视频在线| 又爽又黄a免费视频| av福利片在线观看| 五月伊人婷婷丁香| 成人高潮视频无遮挡免费网站| 国产精品综合久久久久久久免费| 国产成人精品婷婷| 一边摸一边抽搐一进一小说| 亚洲图色成人| 国语自产精品视频在线第100页| 国产一区二区在线观看日韩| 黄色视频,在线免费观看| 成人鲁丝片一二三区免费| 久久久久免费精品人妻一区二区| 亚洲精品亚洲一区二区| 99九九线精品视频在线观看视频| 桃色一区二区三区在线观看| 亚洲精华国产精华液的使用体验 | 日日摸夜夜添夜夜爱| 午夜久久久久精精品| av在线蜜桃| 91麻豆精品激情在线观看国产| 嫩草影院新地址| 美女 人体艺术 gogo| 中文字幕av在线有码专区| 天堂中文最新版在线下载 | 国产精品电影一区二区三区| 国产精品一区二区性色av| 黑人高潮一二区| 狠狠狠狠99中文字幕| 蜜桃亚洲精品一区二区三区| 免费一级毛片在线播放高清视频| 1000部很黄的大片| 久久久久久伊人网av| 青青草视频在线视频观看| 男女视频在线观看网站免费| 国产亚洲精品久久久com| 亚洲一区高清亚洲精品| av在线老鸭窝| 少妇高潮的动态图| 亚洲成人久久性| 草草在线视频免费看| 波多野结衣高清作品| av视频在线观看入口| 可以在线观看的亚洲视频| 国产在视频线在精品| 成人美女网站在线观看视频| 国产免费男女视频| 美女脱内裤让男人舔精品视频 | 亚洲自偷自拍三级| 国产亚洲91精品色在线| 美女 人体艺术 gogo| 亚洲最大成人中文| 国产高清激情床上av| 岛国在线免费视频观看| 国内久久婷婷六月综合欲色啪| 国内精品美女久久久久久| АⅤ资源中文在线天堂| a级毛色黄片| 亚洲最大成人中文| 搡女人真爽免费视频火全软件| 少妇猛男粗大的猛烈进出视频 | 国产欧美日韩精品一区二区| 午夜福利高清视频| 国产av不卡久久| 午夜免费激情av| 高清在线视频一区二区三区 | 日本一本二区三区精品| 欧美区成人在线视频| 久久精品久久久久久噜噜老黄 | 国产爱豆传媒在线观看| www日本黄色视频网| 91av网一区二区| 国产精品无大码| 精品一区二区免费观看| 深夜精品福利| 国产精品爽爽va在线观看网站| 女人十人毛片免费观看3o分钟| 毛片一级片免费看久久久久| 一边摸一边抽搐一进一小说| 麻豆国产av国片精品| 99国产精品一区二区蜜桃av| 美女黄网站色视频| 免费av毛片视频| 嫩草影院精品99| 久久久色成人| 精品久久久噜噜| 欧美又色又爽又黄视频| 国产精品人妻久久久影院| 国产成人影院久久av| 国产精品野战在线观看| 在线观看av片永久免费下载| 久久精品国产清高在天天线| 麻豆成人午夜福利视频| 日本三级黄在线观看| 久久久久免费精品人妻一区二区| 亚洲一区二区三区色噜噜| 国产不卡一卡二| 亚洲最大成人av| 国产精品嫩草影院av在线观看| 国内久久婷婷六月综合欲色啪| 亚洲性久久影院| 身体一侧抽搐| 色综合亚洲欧美另类图片| 免费大片18禁| 国产美女午夜福利| kizo精华| 国产女主播在线喷水免费视频网站 | 啦啦啦韩国在线观看视频| 特级一级黄色大片| 国产亚洲5aaaaa淫片| 97在线视频观看| 夜夜夜夜夜久久久久| 在线a可以看的网站| 97超视频在线观看视频| 国产成人影院久久av| 天堂影院成人在线观看| 久久久久久久久久久免费av| 亚洲av男天堂| 国产亚洲精品久久久com| 精品久久久久久成人av| 夜夜看夜夜爽夜夜摸| 久久久久久国产a免费观看| 国产视频内射| 99久久精品一区二区三区| 三级国产精品欧美在线观看| or卡值多少钱| 晚上一个人看的免费电影| 亚洲人成网站在线观看播放| 少妇人妻一区二区三区视频| 国模一区二区三区四区视频| 亚洲久久久久久中文字幕| 国产毛片a区久久久久| 国产真实伦视频高清在线观看| 久久久久久大精品| 免费在线观看成人毛片| 国产色婷婷99| 22中文网久久字幕| 乱人视频在线观看| 能在线免费观看的黄片| 99精品在免费线老司机午夜| 又粗又爽又猛毛片免费看| 国产精品精品国产色婷婷| 亚洲av免费高清在线观看| 欧美最黄视频在线播放免费| av在线观看视频网站免费| 美女国产视频在线观看| 淫秽高清视频在线观看| 国产片特级美女逼逼视频| 国产在线男女| 22中文网久久字幕| 97在线视频观看| 久久人人爽人人片av| 亚洲欧美成人精品一区二区| 只有这里有精品99| 国产成人a∨麻豆精品| 亚洲精品乱码久久久v下载方式| 成年女人看的毛片在线观看| 色哟哟·www| 亚洲人成网站在线播| 1000部很黄的大片| 听说在线观看完整版免费高清| 中文字幕制服av| 熟女电影av网| 丰满人妻一区二区三区视频av| 99riav亚洲国产免费| 99久久人妻综合| h日本视频在线播放| 国产精品,欧美在线| 嫩草影院入口| 国产乱人偷精品视频| 亚洲欧美精品自产自拍| 有码 亚洲区| 夜夜夜夜夜久久久久| 日韩,欧美,国产一区二区三区 | 少妇高潮的动态图| 久久精品夜夜夜夜夜久久蜜豆| 嫩草影院入口| 一级毛片aaaaaa免费看小| 中文字幕av成人在线电影| 久久久久久国产a免费观看| 亚洲人与动物交配视频| 日韩欧美在线乱码| 国产三级在线视频| av卡一久久| 天堂网av新在线| 只有这里有精品99| 久久午夜福利片| 亚洲人成网站在线观看播放| av免费观看日本| 男人和女人高潮做爰伦理| 91狼人影院| 99久久中文字幕三级久久日本| 可以在线观看的亚洲视频| 看片在线看免费视频| 国产极品天堂在线| 日本免费a在线| 成人亚洲精品av一区二区| 久久精品91蜜桃| 国产一区亚洲一区在线观看| 成人av在线播放网站| 99精品在免费线老司机午夜| 亚洲真实伦在线观看| 久久久精品欧美日韩精品| 亚洲av不卡在线观看| 成人高潮视频无遮挡免费网站| 男人舔女人下体高潮全视频| 日韩欧美精品免费久久| 亚洲人成网站高清观看| 亚洲激情五月婷婷啪啪| 色吧在线观看| 久99久视频精品免费| 久久精品国产亚洲av涩爱 | 99热全是精品| 99久久九九国产精品国产免费| 国产私拍福利视频在线观看| 成人av在线播放网站| 特级一级黄色大片| 免费av毛片视频| 亚洲成人久久爱视频| 特级一级黄色大片| 美女黄网站色视频| 嘟嘟电影网在线观看| 三级国产精品欧美在线观看| 免费观看人在逋| 成人午夜精彩视频在线观看| 美女国产视频在线观看| 秋霞在线观看毛片| 在线天堂最新版资源| 国产精品精品国产色婷婷| 亚洲精品乱码久久久v下载方式| 国产爱豆传媒在线观看| 亚洲aⅴ乱码一区二区在线播放| 真实男女啪啪啪动态图| 2021天堂中文幕一二区在线观| 午夜免费激情av| 久久久久久久久久成人| 99热只有精品国产| 久久久久性生活片| 两性午夜刺激爽爽歪歪视频在线观看| 国产精品国产三级国产av玫瑰| 成人鲁丝片一二三区免费| 夫妻性生交免费视频一级片| 国产一区亚洲一区在线观看| 久久人人爽人人片av| 97人妻精品一区二区三区麻豆| 两性午夜刺激爽爽歪歪视频在线观看| 日韩强制内射视频| 国产精品电影一区二区三区| 我的女老师完整版在线观看| 国产精品久久久久久久久免| 久久精品人妻少妇| 最近手机中文字幕大全| 天天一区二区日本电影三级| 精品久久国产蜜桃| 级片在线观看| 五月伊人婷婷丁香| 秋霞在线观看毛片| 亚洲欧美精品自产自拍| 欧美zozozo另类| 小蜜桃在线观看免费完整版高清| 国产成人91sexporn| 免费看日本二区| 亚洲精品乱码久久久久久按摩| 毛片女人毛片| av.在线天堂| av卡一久久| 日韩欧美国产在线观看| av在线观看视频网站免费| 久99久视频精品免费| 欧美区成人在线视频| 亚洲aⅴ乱码一区二区在线播放| 免费看光身美女| 听说在线观看完整版免费高清| 国产伦精品一区二区三区四那| 爱豆传媒免费全集在线观看| 99久国产av精品| 蜜臀久久99精品久久宅男| 给我免费播放毛片高清在线观看| 99久久九九国产精品国产免费| 亚洲最大成人av| 99热精品在线国产| 国产精品,欧美在线| 国产成人aa在线观看| 内射极品少妇av片p| 99热网站在线观看| 国产精品久久久久久精品电影小说 | 91狼人影院| 久久精品影院6| 级片在线观看| 精品久久久久久久久亚洲| 欧美xxxx性猛交bbbb| 国产午夜福利久久久久久| videossex国产| 人人妻人人澡人人爽人人夜夜 | av女优亚洲男人天堂| 少妇高潮的动态图| 亚洲精品国产成人久久av| 黄色欧美视频在线观看| 搡女人真爽免费视频火全软件| 久久精品夜色国产| 欧美日韩一区二区视频在线观看视频在线 | 国内精品一区二区在线观看| 国产精品人妻久久久影院| 极品教师在线视频| 午夜福利高清视频| 一本久久精品| 国产精品一区二区三区四区免费观看| 有码 亚洲区| 精品久久久久久久久久久久久| 最新中文字幕久久久久| 非洲黑人性xxxx精品又粗又长| 亚洲国产高清在线一区二区三| av卡一久久| 久久久久久久久久成人| 久久久久久大精品| 日韩大尺度精品在线看网址| 亚洲美女视频黄频| 国产精品伦人一区二区| 亚洲真实伦在线观看| 日本一二三区视频观看| 日本成人三级电影网站| 91久久精品国产一区二区成人| 亚洲,欧美,日韩| 色哟哟·www| 国产精品野战在线观看| 国产精品人妻久久久影院| 亚洲精品乱码久久久v下载方式| 精品久久久久久久久亚洲| 99热6这里只有精品| 日本黄大片高清| 男女视频在线观看网站免费| 国产毛片a区久久久久| 校园人妻丝袜中文字幕| 日韩成人伦理影院| 国产精品三级大全| 亚洲在线观看片| 97超视频在线观看视频| 久久精品国产亚洲av天美| av黄色大香蕉| 搡女人真爽免费视频火全软件| 欧美成人精品欧美一级黄| 深夜a级毛片| 久久精品久久久久久久性| 国产三级中文精品| 能在线免费观看的黄片| 麻豆久久精品国产亚洲av| 插阴视频在线观看视频| 三级男女做爰猛烈吃奶摸视频| 久久午夜福利片| 夫妻性生交免费视频一级片| 精品久久久久久久末码| 免费av不卡在线播放| 成人无遮挡网站| 欧美日韩综合久久久久久| 男女视频在线观看网站免费| 久久久久国产网址| 综合色丁香网| 国产白丝娇喘喷水9色精品| 久久韩国三级中文字幕| 夫妻性生交免费视频一级片| 一本一本综合久久| 国内少妇人妻偷人精品xxx网站| 日韩 亚洲 欧美在线| 蜜臀久久99精品久久宅男| 免费看日本二区| 久久99精品国语久久久| 最近的中文字幕免费完整| 在线观看av片永久免费下载| 精品人妻熟女av久视频| 一进一出抽搐gif免费好疼| 毛片女人毛片| 人妻夜夜爽99麻豆av| 少妇裸体淫交视频免费看高清| 伦精品一区二区三区| 欧美日韩乱码在线| 国产伦一二天堂av在线观看| 亚洲最大成人av| 日韩欧美在线乱码| 我要看日韩黄色一级片| 麻豆成人av视频| 欧美一区二区亚洲| 大香蕉久久网| 免费搜索国产男女视频| 免费看光身美女| 免费人成视频x8x8入口观看| 免费无遮挡裸体视频| 少妇猛男粗大的猛烈进出视频 | 欧美潮喷喷水| 九色成人免费人妻av| 亚洲av中文字字幕乱码综合| 国产精品精品国产色婷婷| 欧美日韩国产亚洲二区| 超碰av人人做人人爽久久| 亚洲,欧美,日韩| 日日摸夜夜添夜夜爱| 国产白丝娇喘喷水9色精品| 午夜老司机福利剧场| 日韩一本色道免费dvd| 啦啦啦啦在线视频资源| 91aial.com中文字幕在线观看| 美女高潮的动态| 日韩精品有码人妻一区| 丝袜喷水一区| 国产成人福利小说| 看黄色毛片网站| 欧美性猛交╳xxx乱大交人| 国产探花极品一区二区| 一级毛片我不卡| 欧美一区二区精品小视频在线| 久久精品久久久久久久性|