基于系統偏差的車門玻璃升降阻力計算模型

何劍

摘 要：以某車型為例，討論系統偏差情況下的玻璃升降阻力計算模型。先建立玻璃的幾何模型，通過分析玻璃的偏轉量計算玻璃力矩，當力矩平衡時，玻璃處于偏差位置下的動態平衡，再進行升降阻力計算，最終與升降器進行匹配分析。

關鍵詞：玻璃偏差 平衡系數 升降阻力 升降器匹配

Calculation Model of Lifting Resistance of Car Door Glass Based on System Deviation

He Jian

Abstract：Taking a certain vehicle model as an example， the calculation model of glass lifting resistance under the condition of system deviation is discussed. The geometric model of the glass is first established， and the glass torque is calculated by analyzing the deflection of the glass. When the torque is balanced， the glass is in the dynamic balance at the deviated position， then the lifting resistance is calculated， and finally the matching analysis with the lifter is performed.

Key words：glass deviation， balance coefficient， lift resistance， lifter matching