• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Fluorinated TiO2 Hollow Photocatalysts for Photocatalytic Applications

    2021-07-13 09:56:32JiabiLiXiWuShengweiLiu
    物理化學(xué)學(xué)報(bào) 2021年6期

    Jiabi Li, Xi Wu, Shengwei Liu

    School of Environmental Science and Engineering, Guangdong Provincial Key Laboratory of Environmental Pollution Control and Remediation Technology, Sun Yat-sen University, Guangzhou 510006, China.

    Abstract: Recently, extensive studies have been carried out to synthesize spherical microassemblies with hollow interiors and specific surface functionalizations, which usually exhibit fascinating enhanced or emerging properties and have promising applications in catalysis, photocatalysis, energy conversion and storage, biomedical applications, etc. With particular emphasis on the results obtained mainly by the authors’ research group, this review provides a brief summary of the recent progress on the fabrication and potential photocatalytic applications of fluorinated TiO2 porous hollow microspheres (FTiO2 PHMs). The synthesis strategies for F-TiO2 PHMs include a simplified two-step templating method and template-free method based on the fluoride-mediated self-transformation (FMST) mechanism. Compared to the two-step templating method, the template formation, coating, and removal steps for the FMST method are programmatically proceeded in“black-box”-like one-pot reactions without additional manual steps. The four underlying steps involved in the fabrication of F-TiO2 PHMs through the FMST pathway, nucleation, self-assembly, surface recrystallization, and self-transformation, are presented. By controlling these four steps in the FMST pathway, F-TiO2 PHMs can be successfully fabricated with a high yield by a simple one-pot hydrothermal treatment. The multi-level microstructural characteristics (including the interior cavity and hierarchical porosity) and compositions of hollow TiO2 microspheres as well as the primary building blocks can be well tailored. The unique superstructures of the F-TiO2 PHM photocatalysts provide advantages for photocatalytic applications by improving the light harvesting, mass transfer, and membrane antifouling. In addition, the in situ-introduced surface fluorine species during the formation of F-TiO2 PHMs provide significant surface fluorination effects, which are not only favorable for the adsorption and activation of reactant molecules, but also beneficial for surface trapping and interfacial transfer of photo-excited electrons and holes. Moreover, the porous hollow superstructures exhibit considerably better compatibility and tolerance to guest modifications, and thus the photocatalytic performances of F-TiO2 PHMs can be increased by synergetic host and guest modifications, such as ion doping, group functionalization, and nanoparticle loading.The light-harvesting range and intensity can be increased, the charge recombination can be reduced, mass transfer and adsorption can be promoted, and the surface reactivity can be tuned by introducing specific surface functionalities or nanoparticular cocatalysts. Consequently, the entire photocatalytic process can be systematically modulated to optimize the overall photocatalytic performance. The as-prepared F-TiO2 PHMs typically integrate the merits of interior cavity,hierarchical porosity, and surface fluorination and are open to synergetic host-guest modifications, which provides abundant compositional/structural parameters and specific physicochemical properties for systematically modulating the interconnected photocatalytic processes and promising potential photocatalytic applications.

    Key Words: TiO2; Hollow; Microspheres; Hierarchical porosity; Surface fluorination

    1 Introduction

    Advanced photocatalytic technique is one of the most promising strategies in employing solar energy to solve increasingly serious energy crisis and environmental pollution1,2. To this end, exploiting advanced semiconductor photocatalysts is a primary step to develop practical and efficient photocatalytic techniques. Among various semiconductor photocatalysts, titania has proven to be one of the most suitable,due largely to its superior catalytic activity, long-term stability and low cost3. Unfortunately, most of the currently available titania photocatalysts are still characteristic of narrow lightresponse range and low quantum efficiency, which greatly restrict their practical applications3. In the past decades, various strategies, including bulk engineering and surface/interfacial modification of titania photocatalysts, have been developed with an attempt to modify the photocatalytic processes and to improve the photocatalytic efficiency3–22.

    Especially, it has been demonstrated that the morphological and textural characteristics of titania photocatalysts strongly influence the light harvesting, transportation and transfer of photoexcited electrons and holes, diffusion and adsorption of reactant molecules, which are crucial factors determining the photocatalytic performances15–26. While various TiO2nanostructures have been synthesized and investigated in the previous studies, the controllable fabrication and photocatalytic applications of TiO2hollow structures merits special attention18.It is expected that higher photocatalytic reactivity and energy conversion efficiency could be achieved using TiO2hollow structures as photocatalysts, due to their flexibly designed multileveled micro-/nanostructures, readily available compatible and synergetic guest modification, porous frameworks and high specific surface area, larger substrateadsorption capacities as well as stronger light-harvesting intensities17,18. Up to now, a rich variety of methods has already been exploited for fabricating hollow TiO2nanostructures27–32.In particular, template-directed approaches, including the direct or inverse replication of preformed structures or organized reaction environments, have been used extensively to create hollow TiO2nanostructures. Typically, conventional templating methods involve three steps27, as shown in Fig. 1. Especially,the preformed specific template core with uniform size and specific surface functionalization is usually necessary, which directing the following coating step and determining the cavity size of final hollow products. Unfortunately, the cost for producing and consuming preformed templates is usually high,and the multiple steps may cause more complexity and less reproducibility. To overcome the drawbacks associated with conventional templating method, the authors developed three modified strategies to simplify the synthesis procedures of aforementioned templating methods, which will be elaborated later (Fig. 1). Notably, one common point is that all the three strategies developed by the authors to produce hollow TiO2nanostructures involve the participation of specific fluoride as either precursors or structure-controlling agents17,33–42. Due to the subtle interaction between fluoride and titania and versatile role of fluoride playing, the multi-level microstructural characteristics of hollow TiO2nanostructures can be well tailored, including the size, shape, cavity size, shell thickness and porosity of the hollow framework as well as the size, shape and surface chemistry of the primary nanobuilding blocks27.Moreover, the fluoride-mediated synthesis processes generally result in thein situsurface fluorination of synthesized hollow titania nanostructures34. Significantly, surface fluorination of titania photocatalysts are not only favorable for the adsorption and activation of reactant molecules, but are also beneficial for surface trapping and interfacial transfer of photoexcited electrons and holes, which together contribute to reducing the recombination probabilities of photoexcited electrons and holes and improving the surface photocatalytic redox reaction efficiencies30,36,37. Taken together, the attractive physicochemical properties of the hollow architectures in combination with the unique surface fluorination effects make fluorinated TiO2hollow nanostructures emerge as potential candidates for various photocatalytic applications. In addition,the porous framework of fluorinated TiO2hollow nanostructures endow them with diverse compatible guest modifications with further synergetic effects in modulating photocatalytic processes and performances. In this feature article, we briefly summarize recent progress regarding the fabrication and potential photocatalytic applications of fluorinated TiO2hollow nanostructures, with particular emphasis on the results obtained by the authors.

    Fig. 1 Four typical routes for general synthesis of hollow nanomaterials: (I) conventional templating; (II) in situ templating;(III) sacrificial templating; (IV) chemically induced self-assembly and transformation (CIST). The dashed boxes denote the combined steps.

    2 Synthetic strategies

    2.1 General strategies

    Until now, the most versatile approach for general preparation of hollow structures is still the conventional templating method(as illustrated in Fig. 1 (I)). The conventional templating methods usually involved the use of various hard templates,typically, monodispersed silica and polymer latex colloids.These templates are characteristic of narrow size distribution,ready availability in relatively large amounts, availability in a wide range of sizes from commercial sources, and simplicity of their synthesis using well-known procedures. In general,conventional templating methods involve the following three major steps27,28: (1) formation of monodispersed template; (2)uniform coating the templates with desired materials or their precursors; and (3) selective removal of the templates to obtain hollow structures. Note that, in most cases, in order to achieve uniform coating in step 2, modification of the template with specific functional groups and/or surface characteristics,including surface charges and porosity, are carried out in advance. The conventional templating method is versatile for the synthesis of a great variety of inorganic and composite hollow nanomaterials. Moreover, it is still the most effective approach in controlling the uniformity in morphology, cavity size, shell thickness and porosity of the resulting hollow creatures.Unfortunately, the rupture or even collapse of the hollow shells occurred commonly during the template removal process (step 3). Worse, the cost for producing and consuming preformed templates is usually high, and the multiple steps may cause more complexity and less reproducibility. To overcome the drawbacks associated with the aforementioned conventional templating method, three advanced strategies were continuously developed to simplify the synthesis procedures. Basically, the simplified synthesis protocols to generate hollow nanomaterials are referred to a combination of two or more consecutive steps mentioned in Fig. 1 (I). Afterwards, three simplified synthesis strategies developed by the authors to synthesize fluorinated hollow TiO2photocatalysts are illustrated in detail. A specific fluoride is usually present in the synthesis system as either precursor or structure-controlling agent to control the production of hollow TiO2nanostructures.

    2.2 Simplified strategies

    2.2.1 Self-templating method

    The first one is termed as ‘in situtemplating’ method (Fig. 1(II)), in which the involved templates arein situformed in the synthesis system and are coupled together with the following coating step. In other words, on the basis of the different reaction activity, the core template and the shell materials are formed sequentially in a homogeneous solution in one-pot reaction system, and the first step for preformed template core is avoided.Most of the soft template arein situformed, and thus most soft template-based strategies can be also regarded asin situtempalting methods. For examples, gas bubble is a typical soft template formedin situin the reaction systems, which is stabilized by the shell materials (or their precursors) and directs the assembly the shell materials around the gas bubble27,28. In addition to a variety of soft templates, hard templates can also bein situintroduced into the synthesis system. A typical example is the versatile carbonaceous polysaccharide sphere template that isin situtransformed from saccharide starting materials43. This case is demonstrated by using (NH4)2TiF6as titania precursor together with glucose as precursors forin situformation of Cbased template (Fig. 2a)44. Hydrothermal treatment of their mixed solution at 180 °C for 12 h results in composite solid microspheres consisting of amorphous TiO2nanoparticles intercalating among the skeleton of porous carbonaceous polysaccharide microspheres. Subsequent calcination of these composite solid microspheres in air above 400 °C gives rise to multi-shelled F-TiO2PHMs with a drastic shrinkage in particle size. Note that the combustion of plentiful carbonaceous polysaccharide within the solid microspheres in air induced phase transition from anatase to rutile as below as 400 °C44. This is less common for fluorinated TiO2particles that are normally thermally stable against phase transition from anatase to rutile even above 600 °C3. Another notable feature of the present FTiO2PHMs is the formation of multi-shells, which is possibly due to the heterogeneous contraction as a consequence of nonequilibrium sintering processes45.

    Fig. 2 Simplified two-step templating method for fluorinated TiO2 porous hollow microspheres. (a) Self-templating: Coupled templatesynthesis with shell-coating, Adapted from J. Phys Chem. Solids.,Elsevier publisher 44. (b) Sacrificial templating: Coupled shell-coating with template-removal (Note: The black dots denote preformed SiO2 microspheres), Adapted from Cryst. Growth Des., ACS publisher 38.

    2.2.2 Sacrificial templating method

    The second one is termed as ‘sacrificial templating’ method(Fig. 1 (III)), in which the coating step occurs accompanied by the simultaneous removal of the template core, that is, preformed template is automatically removed during the coating step, and step 3 are saved. A classical sacrificial templating method is selftemplating (including hollowing process based on interfacial reactions driven by Kirkendall diffusion, galvanic replacement,ion exchangeetc.), in which the preformed templates are not only the scaffolds directing the formation of shell materials, but are also the precursors towards shell materials27,28. The sacrificial templating method for fabricating F-TiO2PHMs is demonstrated by using preformed SiO2microspheres as templates and TiF4as titania precursor (Fig. 2b)38. After keeping the mixture at 60 °C for 12 h, uniform F-TiO2PHMs are readily formed. The cavity size, shell thickness and particle size of aspreparedF-TiO2PHMs can be adjusted to some extent by controlling the experimental parameters, including the size of the SiO2template, the concentration of the TiF4precursor, reaction temperature and time,etc. For example, by tuning the concentration of the TiF4precursor, the wall thickness of F-TiO2PHMs can be easily tuned. At a low TiF4concentration (0.01 mol·L?1), due to the limited TiO2deposited and low HF generated, the surface of the SiO2spherical template cannot be completely coated and the SiO2template still partially remain in the products. With an increase of the TiF4concentration (0.02–0.06 mol·L?1), the shell of TiO2hollow spheres become thicker.However, further increase to 0.10 mol·L?1, many ill-defined aggregates are generated because of a high supersaturation.Time-dependent evolution experiments clearly indicated the progressive increase in shell thickness of TiO2layer along with the decrease in diameter of SiO2template core, suggesting the concurrent template-directed TiO2deposition andin situSiO2template-sacrificial dissolution. This is understandable taking account of the etching effect of HF byproduct towards SiO2core,during the template directed deposition of TiO2from hydrolysis of TiF4precursor as shown in the equation38:

    Similar strategy was also successfully extended to get porous TiO2nanotubes using preformed VOxnanobelts as templates and TiF4as titania precursor39.

    2.2.3 Template-free method: fluoride-mediated selftransformation (FMST)

    The last one, Template-free Method, is proposed by the authors as “chemically induced self-assembly and transformation” (CIST, Fig. 1 (IV))33, in which the template formation, coating and removal are programmatically proceeded in “blackbox”-like one-pot reactions without any additional manual steps taken part in conventional templating procedures.The CIST methods towards formation of hollow structures are also often referred as template-free method, although in which all the three steps 1–3 are indeed existed and are recorded.Needless to say, the CIST methods are highly desirable, which shall significantly simplify the synthesis procedures and reduce the production cost, making the scale-up of synthesis feasible and cost-effective. Taking account of the central roles of fluoride in the formation of fluorinated TiO2hollow microspheres, the synthesis protocols are also usually named as fluoride mediated self-transformation (FMST) pathway.

    Fig. 3 (a) Fluoride-mediated self-transformation (FMST) pathway to fluorinated TiO2 porous hollow microspheres, Adapted from Nanostructured Photocatalysts (Book), Springer publisher 46. (b–d) TEM images of TiO2 microspheres prepared with RF = 1 at 200 °C for varying hydrothermal time: (b) 30 min; (c) 9 h; (d) 36 h during FMST pathway. Inset in (b) shows the corresponding XRD pattern, Adapted from J. Catal., Elsevier publisher 17.

    Fabrication of F-TiO2PHMs by FMST pathway is one-pot template-free method. The basic formation processes are illustrated in Fig. 3a34,35,46. Typically, four underlying steps are involved. Step 1, nucleation: rapid production of mass metastable TiO2nanoclusters. Step 2, self-assembly:spontaneous assembly of the incipient TiO2nanoclusters into amorphous solid aggregates. Step 3, surface recrystallization:heterogeneous nucleation and crystallization on the surface of amorphous microspheres. Step 4, self-transformation:preferential dissolution of the amorphous interior and concurrent thickening the porous crystalline external shell to produce hollow microspheres. By controlling the four steps in FMST pathway, the multi-level microstructural characteristics of hollow TiO2nanostructures can be flexibly tailored, including the size, shape, cavity size, shell thickness and porosity of the hollow framework as well as the size, shape and surface chemistry of the primary nanobuilding blocks17,38(Fig. 3b–d).

    Based on this FMST strategy, we have successfully fabricated F-TiO2PHMs in high yield by simple hydrothermal treatment of TiOSO4or Ti(SO4)2aqueous solution containing certain fluoride(e.g. NH4F, NH4HF2, CF3COOH)17,33–37. The cavity size, shell thickness and particle size can be easily tuned to great extent by changing experimental parameters, including reactant sources(titanium precursors and fluoride), molar ratio of fluorine to titanium (RF), hydrothermal temperature and time, and dopant,etc. Fig. 4a shows the typical scanning electron microscopy(SEM) image of the F-TiO2PHMs obtained by hydrothermal hydrolysis of Ti(SO4)2in the presence of NH4F (RF= 1) at 200°C for 9 h17. The particles were relatively uniform in diameter (900± 100 nm). Some of the hollow architectures are broken with open mouth. The porous shell walls are composed of closely packed nanoparticles with a roughened exterior. Transmission electron microscopy (TEM) images (Fig. 4b) confirmed the presence of the hollow structure and indicated a shell wall thickness of 100–200 nm. The selected area electron diffraction(SAED) indicated that the shell wall consisted of a polycrystalline aggregate of anatase nanoparticles (Fig. 4b, inset;d-spacings and {hkl} values: 0.351 (101), 0.238 (004), 0.189(200), 0.169 (105), and 0.166 nm (211); space group:I41/amd(141);a= 0.3785 nm,c= 0.9514 nm, JCPDS No. 21-1272).

    Unfortunately, during the formation of F-TiO2PHMs, a large fraction of dispersed nanoparticles is commonly produced simultaneously, and the spherical products were usually illshaped and fragile. To overcome this major drawback and from well-defined hollow TiO2microspheres, urea was introduced as a base catalyst to optimize Step 2 (self-assembly, Fig. 3a) in the synthetic protocols35. Clearly, the pH value of the reaction system greatly affects the progress of the hydrolysis and condensation process. Since urea is thermally decomposed during the reaction, and the pH value of reaction system will be fine-tuned in real-time, which is beneficial for tuning nucleation and self-assembly processes. First, by urea modulation, the pH value of reaction system is increased to some extent, the nucleation rate is faster, providing sufficient metastable TiO2nanoclusters for subsequent aggregation. Second, by urea modulation, the pH value of reaction system is closer to the isoelectric point of TiO2, electrostatic repulsion between primary TiO2nanoparticles is weakening, favoring for aggregation.Besides, the TiO2condensation reaction is promoted in a basecatalyzed synthetic system. Therefore, urea tunes the nucleation dynamics and surface states of the elementary TiO2building blocks, which together promote the formation of uniform metastable solid spherical micro-aggregates. Subsequently, their transformation into hollow microspheres accompany with less randomly dispersed nanoparticles (Fig. 4c).

    As to the mass flow in the Step 4 (self-transformation, Fig.3a), the hollowing process can also be classified into two different types47,48. The first type, “outward ripening”, refers to the mass transport starting from the center of starting aggregate;the second type, “inward ripening”, where the mass relocation starts from the surface region of starting aggregate. The inward versus outward hollowing process can be controlled by the solvent composition49. Normally, in pure water system, outward hollowing process occurred with a gradual and progressive decrease in the shell thickness17. In contrast, in a mixed ethanolwater solvent, an inward hollowing process occursviaa spherein-shell intermediate49. The ethanol added seems to affect the diffusion and adsorption of active fluorine species, being responsible for the varied dissolution behaviors of the interior and the different formation processes and structures of F-TiO2PHMs. Furthermore, the shape of shell-building nanoparticles can be tuned into faceted polyhedra exposing high percentage of{001} facets (Fig. 4d)49. The added ethanol probably contributes to facilitating the selective surface fluorination, accordingly,reducing the surface energy and increasing the percentage of exposed {001} facets.

    Fig. 4 (a) SEM and (b) TEM images of fluorinated TiO2 porous hollow microspheres based on FMST mechanism. Inset in (b)shows the corresponding SAED pattern, Adapted from J. Catal.,Elsevier publisher 17. (c) Urea-modified synthesis with consequence of less randomly dispersed nanoparticles, Adapted from Nanotechnology,IOP Science publisher 35. (d) Ethanol-modified synthesis with consequence of shell-building nanoparticles evolving into faceted polyhedra. Inset in (d) shows enlarged polyhedral nanobuilding units exposing high percentage of {001} facets, Adapted from J. Am. Chem. Soc., ACS publisher 49.

    One may note that the present FMST mechanism for F-TiO2PHM is somewhat similar to the “Ostwald ripening” mechanism proposed by Zenget al.36,47,48. Nonetheless, two undervalued aspects shall be at least highlighted for the hollowing process:first, the existence of amorphous stage; second, the critical role of fluoride. The ‘Ostwald ripening’ mechanism assumed that there are inhomogeneous size and distribution of crystallites within the starting aggregates36,47,48. During hollowing processes, large crystallites are essentially immobile while the smaller ones are undergoing mass relocation through dissolving and re-growing. Nonetheless, up to now, there is lacking evidence regarding such a radial size and distribution inhomogeneity, which is somewhat hard to be directly recorded by available experimental tools. A further cross section analysis by TEM after cutting of the starting aggregates shall be helpful.Besides such a plausible localized Ostwald ripening, we note that the phase transition from amorphous to anatase TiO2provides additional driving force for the matter redistribution and hollowing process of the starting aggregates17. In fact, this existence of amorphous intermediate and phase transition process is common and crucial for the hollowing process of many inorganic hollow structures33,50–53. However, in the absence of fluoride added, amorphous solid TiO2microspheres only evolved into the crystalline counterpart without a hollowing process17. In contrast, hollowing processes are readily proceeded after adding fluoride in the synthetic system,highlighting the crucial roles of fluoride in the hollowing processes. Moreover, the hollowing rate was related toRF, with higherRFresulting in a greater hollowing rate17. As for the specific role of fluoride added on the hollowing processes,however, there are two viewpoints regarding the underlying mechanism. One viewpoint highlights the etching effect of HF on the solid starting aggregates. In this regard, a strong acid environment is typically involved to promote HF etching.Alternatively, another viewpoint highlights the promoting effects of F?ions on the dissolution and re-crystallization process of metastable TiO2intermediates (Step 4, selftransformation, Fig. 3a). Two reactions may occur34,35:

    Fig. 5 Typical photocatalytic applications of fluorinated TiO2 porous hollow microspheres: (a) environmental photocatalysis,(b) energy photocatalysis.

    The strong complexing ability of active F ions facilitates the dissolution of metastable TiO2(Eq. 3). Such a complexingmediated dissolution process avoids the dependence on the strong acid environment, which is supported by urea-modified synthetic protocols35. Also, the re-crystallization process is promoted by fluorination (Eq. 4), affecting the reaction dynamics and linking modes during hydrolysis and condensation reactions. In fact, this promoting effect of fluoride on the crystallization process is readily confirmed by comparing the degree of crystallinity and crystallite size of anatase crystallites obtained in the presence relative to absence of fluoride (XRD results)17.

    3 Photocatalytic applications

    Environmental photocatalytic technology is intensively developed as one of the most promising advanced oxidation processes (AOPs) for diverse environmental remediation, which possesses a series of advantages in comparison with conventional AOP techniques. Significantly, the oxidants involved in environmental photocatalytic reactions/processes can be simply the widely available water or oxygen molecules,which would be activated by photogenerated charge carriers to generate the highly active reactive oxidative species (ROSs),such as hydroxyl radicals (·OH) and superoxide radicals (·O2?)(Fig. 5a). Thesein situgenerated ROSs are highly reactive,which are able to completely decompose most organic pollutants into CO2and H2O, avoiding secondary pollution. Up to now, the environmental photocatalytic technologies have been widely exploited for complete removal of volatile organic compounds(VOCs) in air and for deep decomposition of diverse organic pollutants (such as dye molecules) in water54–58. Nevertheless,the produced CO2itself is the major greenhouse gas in the atmosphere, and increasing emission of the CO2overloads the self-purification capacity of the environment based on natural carbon cycling. It is ideal that the CO2produced from the treatment of organic pollutants can be further converted into valuable organic chemicals (such as solar fuels). In this regard,the photocatalytic reduction of CO2with H2O towards valueadded solar fuels (Fig. 5b), named, artificial photosynthesis, is emerged as an important process of energy photocatalytic technology59. Artificial photosynthesis can not only reduce the content of CO2in the atmosphere, inhibit greenhouse effect and relieve the environmental pressure, but also produce renewable resources and convert the hard-to-store solar energy into chemical energy which is easy to store and use. Evidently.advanced photocatalysts with much higher photocatalytic efficiency is crucial for developing practical photocatalytic techniques. Unfortunately, up to now, the apparent photocatalytic efficiency of most available photocatalyst systems is still quite low, which cannot meet the demands for large scale treatments of waste water/gas in high flux and/or high concentration.

    The whole photocatalytic processes for either environmental or energy-related applications are complex. Generally speaking,four basic interconnected processes are involved for various photocatalytic redox reactions (including photocatalytic organic pollutant decomposition and CO2reduction) over TiO2or other photocatalysts. First (light absorption, charge generation): light absorption and excitation produces photogenerated charge carriers (holes and electrons). Second (charge separation and transport), those charges are separated against recombination,and transporting from bulk toward the catalyst surface. Third(reactant adsorption and activation), reactants are adsorbed and activated by interfacial charge transfer from catalyst surface to targeted reactants. Fourth (surface reactions), the surface redox reactions occur with targeted pathway and kinetics. Accordingly,a photocatalytic material system is generally consisting of four cooperative functional modules, that is, light-active centers,charge transportation channel, adsorption centers and the catalysis-active centers, which are closely interconnected and working cooperatively in dominating the whole photocatalytic processes. Essentially, modifying photocatalytic processes could be primarily achieved by engineering the multilevel structures of photocatalytic material system, including electronic,crystallographic, surface, and textural structures. However,simply modifying a specific structural parameter, modulating a single functional module, and tuning a single photocatalytic step will usually be hard to significantly improve the overall photocatalytic efficiency, not to mention that the associated possible negative effects on other correlated processes. For example, because of introduced impurities and defects associated localized electronic states, doping would usually enhance visible light absorption but impair the charge transportation. All the photocatalytic modules shall be modified as an integrated organic whole to cooperatively modulate the correlated photocatalytic steps. The hierarchical super-structured photocatalysts, with abundant multileveled structural parameters, possessed multi-aspect structural advantages for synergetic tuning of the four functional modules, which would enable a comprehensive optimization of the overall interconnected complex photocatalytic processes and overall photocatalytic efficiency18. Especially, the constructed porous TiO2microspheres is an excellent model example of hierarchical super-structured photocatalysts, in which the integrated engineering of multilevel microstructures would be readily achieved for the synergetic tuning of the four functional modules and thus the great enhancement in photocatalytic performances.

    3.1 Hollowing effects

    In addition to the universal merits of primary photocatalytic nanomaterials, the unique superstructure of porous hollow photocatalysts brings special advantages in improving light harvesting and mass transfer. Firstly, it is generally proposed that the hollow photocatalysts allow multi-reflections of irradiated light within their interior cavities, endowing them with enhanced light-harvesting (Fig. 6a)58. Indeed, the presentF-TiO2PHMs usually show a stronger absorption in the UV-visible region(310–700 nm) than P2559.

    Fig. 6 The unique superstructure of TiO2-based porous hollow photocatalysts brings special advantages in improving (a) light harvesting, (b) mass transfer and (c) membrane antifouling, Adapted from J. Am. Chem. Soc., ACS publisher 58. (d) Nitrogen sorption isotherm (inset) and corresponding pore size distribution of fluorinated TiO2 porous hollow microspheres via two-step templating method:keeping a 0.02 mol·L?1 TiF4 aqueous solution containing preformed microspherical SiO2 template at 60 °C for 12 h, Adapted from Cryst.Growth Des., ACS publisher 38.

    Moreover, the mass transfer and reactant capture is largely promoted in hollow photocatalysts (Fig. 6b). The formation of F-TiO2PHMs is accompanied by hierarchical organization of primary nanoparticles. As a result, those F-TiO2PHMs are composed of at least three levels of hierarchically porous structures covering micropores, mesopores and macropores38:(i) fine intra-aggregated pores (less than several nanometers) due to the aggregation of primary particles, (ii) large interaggregated pores (several to several tens nanometers) due to mesoscale packing of secondary aggregation particles in the shell wall, and (iii) assembly of a self-supporting, continuous outer shell enclosing an internal cavity space. It should be noted that both the pore size and their contributions can be adjusted to some extent by the experimental variation. The typical hierarchical porosity is clearly reflected in Fig. 8, a typical pore size profile forF-TiO2PHMs analyzed from N2sorption measurement38. Notably, two separate hysteresis loops are presented (inset in Fig. 6d), and the corresponding pore size profile showed a bimodal distribution across the mesoporous region (Fig. 6d). Smaller mesopores (2–20 nm) are usually related to primary intra-agglomeration driven by Gibbs free energy, while the larger ones (20–50 nm) are associated with secondary inter-aggregation involving condensation between primary agglomerates35. The high specific surface area and hierarchically porous framework is beneficial for improving mass transfer and adsorption of reactant molecules. Meanwhile,the initial concentration gradient inside and outside the porous hollow chamber give rise to localized driving force promoting the directional diffusion of reactant molecules from bulk solution towards the surface of hollow photocatalyst (Fig. 6b). Owing to the collective properties of hollow photocatalysts in promoting light harvesting and mass transfer, it is well demonstrated that these prepared F-TiO2PHMsexhibit superior photocatalytic activities towards decomposing VOCs in air as well as textile dyes in aqueous solution17,34–39.

    For practical water treatments, theseF-TiO2PHMs,characteristic of assembled micro-sized superstructures, also have unique merits with respect to better recyclability and lesser membrane fouling (Fig. 6c), relative to normal nanosized photocatalyst59. Moreover, it is commonly observed that a significant fraction of F-TiO2PHMs tends to fuse together in form of dimers, trimers, or chain-like assemblies35. This dimerization process should be induced by titania condensation as two separate F-TiO2PHMs consisting of Ti-OH group on the surface contact each other. The recyclability and membrane antifouling features would be further intensified by their spontaneously forming chain-like assemblies. The better membrane antifouling performance ofF-TiO2PHMs have been simply demonstrated in crossflow microfiltration process, as compared with P25 nanoparticles59. After 2 h of filtration, the membrane permeate flux decreased by 31.5% for P25, whereas only a decrease of 14.9% occurred for F-TiO2PHMs60.

    3.2 Surface fluorination effects

    Note that fluoride is involved in all the above-mentioned synthetic systems. Taking account of the strong complexing ability of fluorine toward titanium, there is typically surface fluorination forF-TiO2PHMs. A typical high-resolution X-ray photoelectron spectroscopy spectrum of F 1sregion for the preparedF-TiO2PHMs indeed present a peak centered atca.684.44 eV, which was related to surface adsorbed F ions (i.e.,formation of ≡Ti―F surface species)54–56. Otherwise, the typical F 1speak corresponding to doped F?(i.e., lattice Fdoping, typically located at 688–689 eV12) is not detected. This is understandable considering the low-temperature hydrothermal conditions for preparingF-TiO2PHMs relative to the higher calcinations temperature normally for effective lattice F-doping.

    The surface fluorination exhibits great impacts on the photocatalytic performance. The surface fluorination effects can be simply summarized as follows.

    (1) The surface fluorination tunes the reactant adsorption capacity and mode, depending on the specific physiochemical properties of reactant molecules (Fig. 7)61,62. Normally, the surface fluorination will reduce surface charge, and thus favoring the adsorption of the positively charged organic pollutants, but inhibiting the adsorption of negatively charged organic pollutant. Usually, surface fluorination results in higher photocatalytic activity just because of a higher adsorption capacity. Furthermore, surface fluorination would modulate the photocatalytic selectivity of TiO2photocatalyst by tuning the selective adsorption. As an example, Liuet al.49reported that the surface-clean hollow TiO2spheres (surface fluoride removed by annealing at 600 °C) preferentially decomposes methylene blue (MB) in comparison to methyl orange (MO). On the contrary, the fluorinated hollow TiO2spheres exhibit preferential decomposition of MO over MB, since the selective adsorption of MB is inhibited.

    (2) Surface fluorination significantly tunes the interfacial charge transfer. For hole transfer, after surface fluorination, the direct hole transfer is retarded, but the indirect hole transfer is enhanced by producing mobile free OH radicals. It isproposed that, for hole mediated activation of adsorbed H2O (H2Oads),mobile free OH radicals (·OHfree, Eq. 5, Fig. 7) are facilitated over the surface fluorinated TiO2(Ti-F), but surface adsorbed OH radicals (·OHads, Eq. 6) are dominated on surface-clean TiO2(Ti-OH)34:

    Fig. 7 Surface fluorination effects: (a) modifying reactant adsorption capacity and mode; (b) tuning charge transfer kinetic and mechanism.

    It is expected that the mobile ·OHfreeare much more reactive than the surface-bound ·OHads, and thus the photocatalytic decomposition rate of most organic pollutant in aqueous solution can be enhanced upon surface fluorination.

    (3) Surface fluorination enhances surface electron storage,leading to retarded electron transfer but inhibited charge recombination. Because of the strong electronegativity of fluorine, the surface ≡Ti―F seems to act as an electron-trapping site and to reduce interfacial electron transfer rates by tightly holding trapped electrons34. The enhanced electron storage in the surface ≡Ti―F moiety retards electron transfer (to O2), but inhibits charge recombination, which in turn significantly facilitates the interfacial indirect hole transfer and generation of more free OH radicals (Fig. 7).

    All these three aspects shall be comprehensively considered in understanding the unique photocatalytic redox properties of surface fluorinated photocatalysts (Fig. 7). Notably, the overall photocatalytic performance of F-TiO2could be further enhanced if electron transfer is improved. Typically, co-catalysts and adspecies can be introduced to promote electron transfer. As a case in point, Choi’s team reported that the simultaneous modification of TiO2with platinum nanoparticles and surface fluoride was beneficial for both hydrogen production and organic pollutant degradation63.

    3.3 Synergetic effects

    Compared to the primary nanostructures, the porous hollow superstructures exhibit much better compatibility and tolerance to guest modifications, enriching the abundance of compositional/structural parameters that synergistically tune the physicochemical properties and photocatalytic processes. In this regard, besides the above-mentioned collective properties of hollow superstructures and surface fluorination effects of F-TiO2PHMs, the photocatalytic performance of F-TiO2PHMscan be further enhanced by synergetic host and guest modifications,such as ion doping, group functionalization and nanoparticle loading. The synergetic host and guest modifications can be achieved by either post-treatments or one-potin situmodification based on CIST mechanism. Upon synergetic host and guest modifications, the light-harvesting range and intensity can be enhanced, the charge recombination can be reduced, the mass transfer and adsorption can be promoted, and the surface reactivity can be tuned also by introducing special surface functionality or nanoparticular cocatalyst, consequently, the whole photocatalytic processes can be systematically modulated to optimize overall photocatalytic performances. For example,by controlling the surface chemistry and the surface atomic structure of the shell-building primary nanoparticles of theFTiO2PHMs, we have achieved selective adsorption and photocatalytic decomposition of azo dye molecules49, providing an example concerning the design of advanced TiO2photocatalysts with desirable catalytic selectivity beyond reactivity and stability. By synergetic cooping, the environmental photocatalytic activity of thoseF-TiO2PHMs can be further enhanced for the decomposition of VOCs (acetone and toluene) in air and organic pollutants (Rhodamine B, Methyl orange) in aqueous solution54–56. The lattice F-doping are significantly facilitated by special synergetic codoping55,56. For example, the concomitant participation of Zr4+or Sn4+promotes lattice substitution of O2?ions by F?, as evidenced by the presence of an additional F 1speak atca. 688.30 (Zr/Fcodoping) or 688.80 eV (Sn/F-codoping)55,56. It is proposed that electron transfer-mediated charge compensation between the Zr4+(or Sn4+) and F?impurities reduces the diffusion barrier and thus facilitates the lattice doping. The synergetic codoping influences both the surface states and textural characteristics of resulting hollow TiO2photocatalysts.

    Owing to the fascinating Schottky junction effects, surface plasmon resonance (SPR) effects as well as the cocatalyst effects of noble metal (such as Au and Ag) nanoparticles, they are intensively employed to modify TiO2photocatalysts.Incorporating plasmonic Ag or Au nanoparticles into the matrix of theF-TiO2PHMs has been also demonstrated to significantly enhance the visible-light response and the whole-spectrum photoactivity57,59. By FMST pathway, the F-TiO2PHMs are firstly fabricated, which are composed of primary polyhedral anatase nanocrystals with abundant {001} facets and substantial surface defects. After following photochemical deposition, those surface tailored F-TiO2PHMs are successfully decorated uniformly with tiny Au nanoparticles of average size of 14 nm(Fig. 8a–g)59. The resulting Au modified TiO2hollow microspheres (Au1/THMs) exhibit remarkably improved photocatalytic CO2reduction performance under full spectrum,visible-light and AM 1.5 G irradiations (Fig. 8h)59, relative to both P25 and F-TiO2PHMs without Au decoration (Au0/THMs).In short, Au decoration enhances both full spectrum and visiblelight photocatalytic CO2reduction activity. In addition, Au decoration largely tunes the photocatalytic CO2reduction selectivity59. Upon Au decoration, photocatalytic reduction of CO2to CH4is remarkably improved under both full spectrum and visible-light irradiation (Fig. 8h). The strong CO affinity to surface decorated Au nanoparticles limits the release of CO molecules from the surface of hybrid photocatalyst, promoting their further hydrogenation to CH4.

    Because of the synergetic effects of the porous and hollow frameworks, the abundant favourable microscopic surface features (surface fluorination, the high-energy {001} facets, and surface Ti3+/Vodefects), and the surface Au modification, the light harvesting, charge dynamics, CO2adsorption and activation over the hybrid Au1/THMs photocatalyst system are systematically modulated to promote the photocatalytic CO2reduction activity and selectivity. The multiple synergetic effects are illustrated in Fig. 959.

    Fig. 8 (a, b) TEM images, (c) HRTEM image, (d) HAADF-STEM image and (e–g) the corresponding EDS elemental mappings of the typical sample Au/THMs. The inset in panel (a) is the corresponding SAED pattern, and the inset in panel (b) is the enlarged image of the outermost shell wall, (h) comparison of the CH4 and CO generation rates for various samples obtained under full spectrum light irradiation,visible-light and AM 1.5 G irradiation.

    Fig. 9 The synergetic mechanism for enhanced photocatalytic CO2 reduction with H2O to CH4 and CO over hybrid photocatalyst of TiO2 hollow microspheres decorated with Au nanoparticles (Au1/THMs).

    (1) Synergetic effects in enhancing wide-spectrum light absorption. First, the light trapping effects of hollow cavities enhances the UV light absorption. Second, the SPR effects of decorated Au nanoparticles enhances the visible light absorption.Together, the light harvesting capacity and intensity in both ultraviolet and visible light regions are greatly enhanced.

    (2) Synergetic effects in reducing photogenerated charge recombination. First of all, two unique junctions are coexisted.One is related to facet junctions at interface of {001} and {101}facets. Another one is related to the Schottky junctions at the Au/TiO2interface. Both facet and Schottky junctions would facilitate the spatial charge separation, decreasing charge recombination efficiency. In addition, SPR-mediated local electromagnetic field effects of decorated Au nanoparticles will facilitate the interfacial charge separation. Furthermore, surface Ti-F groups and surface defects will facilitate the surface trapping of photo-induced electrons, reducing the surface charge recombination.

    (3) Synergetic effects in promoting surface charge transfer and redox processes. The apparent charge transfer/utilization efficiency largely depends on reactants adsorption and activation, which is in turn determined by the surface host/guest chemistry. In particular, the CO2adsorption capacity is significantly improved by decorating with Au nanoparticles,which have a strong affinity to CO2molecules. Meanwhile, the CO2adsorption modes can be adjusted by introducing surface OH groups, surface Ti3+/Vodefects and the surface decorated Au.Significantly, the CO2molecule can be dissociated into one adsorbed CO moiety and one adsorbed O atom on Au/TiO2. Such chemically dissociated adsorption and activation of CO2,combined with the cocatalyst effect of Au nanoparticles, will accelerate the hydrogenation of surface bond CO to selectively generate CH4in the hybrid Au1/THMs photocatalyst system.

    In brief, the Au decoration effects can be synergistically combined with the attractive porous hollow matrix and the fascinating surface atomic geometry, defects and chemistry of FTiO2PHMs, which together enable an integrated engineering of the light harvesting, charge separation and transfer, as well as the CO2adsorption and activation processes on TiO2photocatalysts,advancing the promising photocatalysts for effective artificial photosynthesis.

    4 Outlook and conclusions

    In the past few years, considerable progress has been made concerning the synthesis and applications of F-TiO2PHMs. The synthetic strategies forF-TiO2PHMs include simplified twostep templating method, as well as template-free method based on FMST mechanism. Especially, FMST based synthesis method is more convenient to scale up for large scale production,because of its relatively simple synthesis procedures, high reproducibility, and low production loss. Moreover, FMST pathway enables a flexible control in cavity size, shell thickness,porosity, as well as particle size and uniformity. The integration of interior cavity, hierarchical porosity and surface fluorination within as-prepared F-TiO2PHMs endow them with interesting physiochemical properties. TheF-TiO2PHMsphotocatalysts exhibit superior photoactivity, desirable recyclability and tunable selectivity. Further exploiting the potential applications of these F-TiO2PHMsis anticipated on the basis of compatible and synergetic host and guest modifications.

    欧美日韩综合久久久久久| 最后的刺客免费高清国语| 国产精品美女特级片免费视频播放器| 日本在线视频免费播放| 亚洲国产日韩欧美精品在线观看| 久久欧美精品欧美久久欧美| 欧美一区二区亚洲| 在现免费观看毛片| 国产精品电影一区二区三区| 欧美一区二区精品小视频在线| 久久久久久伊人网av| 两个人视频免费观看高清| 久久久久性生活片| 欧美+日韩+精品| 日韩欧美 国产精品| 五月玫瑰六月丁香| 简卡轻食公司| 99精品在免费线老司机午夜| 久久热精品热| 中国国产av一级| 美女 人体艺术 gogo| 国产欧美日韩精品一区二区| 国产三级中文精品| 国产一区二区亚洲精品在线观看| 一级黄片播放器| 看片在线看免费视频| 国产女主播在线喷水免费视频网站 | 欧美日本视频| 蜜臀久久99精品久久宅男| 亚洲av免费在线观看| 久久午夜福利片| 国产v大片淫在线免费观看| 欧美激情国产日韩精品一区| 男人舔女人下体高潮全视频| 亚洲精品影视一区二区三区av| 国产精品久久久久久久久免| 三级经典国产精品| 国产精品,欧美在线| 一本久久中文字幕| 精品久久久久久久久久久久久| 大香蕉久久网| 我的女老师完整版在线观看| 最后的刺客免费高清国语| 亚洲天堂国产精品一区在线| 我的老师免费观看完整版| 亚洲国产欧洲综合997久久,| 51国产日韩欧美| 亚洲av中文字字幕乱码综合| 亚洲欧美精品专区久久| 亚洲七黄色美女视频| 免费看日本二区| 伦精品一区二区三区| 久久人人精品亚洲av| 偷拍熟女少妇极品色| 日本黄色片子视频| 欧美激情久久久久久爽电影| 免费av毛片视频| 好男人视频免费观看在线| 人妻久久中文字幕网| 少妇高潮的动态图| 免费电影在线观看免费观看| 亚洲欧美中文字幕日韩二区| 免费av观看视频| 99国产极品粉嫩在线观看| 听说在线观看完整版免费高清| 日本撒尿小便嘘嘘汇集6| 欧美高清成人免费视频www| 久久久午夜欧美精品| 乱人视频在线观看| 一级av片app| 国产精品乱码一区二三区的特点| 丰满的人妻完整版| 春色校园在线视频观看| 午夜免费男女啪啪视频观看| 国产 一区精品| 亚洲av一区综合| 日本撒尿小便嘘嘘汇集6| 国产伦一二天堂av在线观看| 国内揄拍国产精品人妻在线| 亚洲av免费高清在线观看| 成人综合一区亚洲| 日本与韩国留学比较| 免费大片18禁| 亚洲美女搞黄在线观看| 边亲边吃奶的免费视频| 偷拍熟女少妇极品色| 桃色一区二区三区在线观看| 十八禁国产超污无遮挡网站| 国产精品国产高清国产av| 日本黄大片高清| 免费看a级黄色片| 99久久中文字幕三级久久日本| 我的女老师完整版在线观看| 观看美女的网站| 午夜精品在线福利| 嘟嘟电影网在线观看| 久久久a久久爽久久v久久| 亚洲无线观看免费| 亚洲国产高清在线一区二区三| 国产午夜精品久久久久久一区二区三区| 国产精品一及| 欧美日韩乱码在线| 久久精品国产99精品国产亚洲性色| 国产午夜精品论理片| 国产一区二区在线观看日韩| 日韩高清综合在线| 日韩欧美在线乱码| 亚洲欧美成人综合另类久久久 | 亚洲图色成人| 男的添女的下面高潮视频| 日韩强制内射视频| 直男gayav资源| av.在线天堂| 男女边吃奶边做爰视频| 女的被弄到高潮叫床怎么办| 日本黄大片高清| 91久久精品国产一区二区三区| 麻豆精品久久久久久蜜桃| 国产免费男女视频| 亚洲精品色激情综合| 成人av在线播放网站| 在线国产一区二区在线| 亚洲美女视频黄频| 最近2019中文字幕mv第一页| 国产成人一区二区在线| 国内揄拍国产精品人妻在线| 麻豆国产av国片精品| 在线播放无遮挡| 国产一区二区在线观看日韩| 简卡轻食公司| 国产精品99久久久久久久久| 亚洲18禁久久av| 少妇熟女欧美另类| 日本成人三级电影网站| 久久久精品94久久精品| 成熟少妇高潮喷水视频| 国内少妇人妻偷人精品xxx网站| 欧美性感艳星| 最近最新中文字幕大全电影3| 成人毛片a级毛片在线播放| 我要看日韩黄色一级片| 一本精品99久久精品77| 日韩人妻高清精品专区| 两个人视频免费观看高清| 国产又黄又爽又无遮挡在线| 天天躁夜夜躁狠狠久久av| 一个人免费在线观看电影| 亚洲不卡免费看| 国产一级毛片七仙女欲春2| a级毛片a级免费在线| 男人狂女人下面高潮的视频| 国产极品精品免费视频能看的| or卡值多少钱| 国产综合懂色| 久久99精品国语久久久| 高清毛片免费观看视频网站| 中文资源天堂在线| 日韩三级伦理在线观看| 精品日产1卡2卡| 亚洲电影在线观看av| 丰满乱子伦码专区| 国产大屁股一区二区在线视频| 午夜福利高清视频| 偷拍熟女少妇极品色| 亚洲国产精品国产精品| 久久人人精品亚洲av| 久久午夜福利片| 看片在线看免费视频| 精华霜和精华液先用哪个| 春色校园在线视频观看| 九草在线视频观看| 国产一区二区亚洲精品在线观看| 国产在视频线在精品| 精品人妻偷拍中文字幕| 嫩草影院入口| 91狼人影院| 日韩制服骚丝袜av| 狂野欧美白嫩少妇大欣赏| 黄色配什么色好看| 色综合站精品国产| av在线老鸭窝| av国产免费在线观看| 99riav亚洲国产免费| 久久久久久久久中文| 最新中文字幕久久久久| 国产中年淑女户外野战色| 欧美不卡视频在线免费观看| 亚洲精品国产成人久久av| 欧美高清性xxxxhd video| 日本-黄色视频高清免费观看| 黄色视频,在线免费观看| 国产av一区在线观看免费| 一区二区三区高清视频在线| av卡一久久| 国产激情偷乱视频一区二区| 国产私拍福利视频在线观看| 亚洲成a人片在线一区二区| 免费av不卡在线播放| 久久久久久国产a免费观看| 亚洲人成网站在线播| av在线蜜桃| 精品免费久久久久久久清纯| 国产在线男女| 免费av毛片视频| 久久精品国产亚洲网站| 亚洲一区二区三区色噜噜| 超碰av人人做人人爽久久| 中文在线观看免费www的网站| 2022亚洲国产成人精品| 亚洲欧美日韩高清专用| 婷婷精品国产亚洲av| 国产一区二区在线av高清观看| 精品日产1卡2卡| 12—13女人毛片做爰片一| а√天堂www在线а√下载| 精品久久久噜噜| 精品人妻视频免费看| 久久九九热精品免费| 精品少妇黑人巨大在线播放 | 久久久久网色| 国产精品一区二区三区四区免费观看| 九九热线精品视视频播放| 欧美高清性xxxxhd video| 又粗又爽又猛毛片免费看| 一本一本综合久久| 99久久九九国产精品国产免费| 97在线视频观看| 久久精品国产亚洲av天美| 国产乱人视频| 久久九九热精品免费| 伊人久久精品亚洲午夜| 综合色av麻豆| 黄色欧美视频在线观看| 久久亚洲精品不卡| 国产精品伦人一区二区| 男人舔奶头视频| videossex国产| kizo精华| 色综合站精品国产| 欧美最黄视频在线播放免费| 久久久久久久久大av| 麻豆精品久久久久久蜜桃| 欧美三级亚洲精品| 亚洲精品久久国产高清桃花| 两性午夜刺激爽爽歪歪视频在线观看| 国产视频首页在线观看| 青春草视频在线免费观看| 一区福利在线观看| 夜夜夜夜夜久久久久| 亚洲中文字幕一区二区三区有码在线看| 91在线精品国自产拍蜜月| 成人欧美大片| 五月玫瑰六月丁香| 久久久a久久爽久久v久久| 黄片wwwwww| 午夜激情福利司机影院| 一进一出抽搐gif免费好疼| 亚洲高清免费不卡视频| 免费看光身美女| 男女边吃奶边做爰视频| 联通29元200g的流量卡| 免费不卡的大黄色大毛片视频在线观看 | 我要搜黄色片| 午夜免费男女啪啪视频观看| 亚洲欧洲日产国产| 成人一区二区视频在线观看| 久久久久久久久大av| 中出人妻视频一区二区| 日本与韩国留学比较| 99在线视频只有这里精品首页| 国产白丝娇喘喷水9色精品| 国产精品精品国产色婷婷| 精品久久久噜噜| 久久精品国产亚洲av香蕉五月| 成年免费大片在线观看| av天堂在线播放| 久久午夜亚洲精品久久| 精品熟女少妇av免费看| 能在线免费看毛片的网站| 日日摸夜夜添夜夜添av毛片| 精品久久久久久久久亚洲| 毛片女人毛片| 免费人成在线观看视频色| 国产精品一区二区性色av| 中文精品一卡2卡3卡4更新| 久久精品国产亚洲网站| 91狼人影院| 午夜a级毛片| 午夜福利视频1000在线观看| 久久久久久久亚洲中文字幕| ponron亚洲| 黄色视频,在线免费观看| 午夜精品国产一区二区电影 | av.在线天堂| 中文字幕熟女人妻在线| 国产精品久久电影中文字幕| 色哟哟哟哟哟哟| 偷拍熟女少妇极品色| 可以在线观看毛片的网站| 国产精品,欧美在线| 亚洲美女搞黄在线观看| 亚洲欧美成人综合另类久久久 | 欧美激情久久久久久爽电影| 国产精品精品国产色婷婷| 麻豆一二三区av精品| 亚洲自偷自拍三级| 最近最新中文字幕大全电影3| 久久这里只有精品中国| 人妻久久中文字幕网| 亚洲自拍偷在线| 在线免费观看不下载黄p国产| 国产女主播在线喷水免费视频网站 | 美女黄网站色视频| 日本色播在线视频| 国产三级中文精品| 久久综合国产亚洲精品| 如何舔出高潮| 亚洲成人av在线免费| 日本免费一区二区三区高清不卡| 亚洲精品成人久久久久久| 黑人高潮一二区| 在现免费观看毛片| 九草在线视频观看| 少妇的逼好多水| 麻豆av噜噜一区二区三区| 一夜夜www| 高清毛片免费看| 国内少妇人妻偷人精品xxx网站| 床上黄色一级片| 在现免费观看毛片| 岛国毛片在线播放| 高清日韩中文字幕在线| 最近的中文字幕免费完整| 国产精品乱码一区二三区的特点| 99久久中文字幕三级久久日本| 国产一级毛片在线| av.在线天堂| 免费搜索国产男女视频| 少妇的逼水好多| 18禁黄网站禁片免费观看直播| 禁无遮挡网站| 色综合色国产| 青青草视频在线视频观看| 国产又黄又爽又无遮挡在线| 此物有八面人人有两片| 18禁在线无遮挡免费观看视频| 国产91av在线免费观看| 看十八女毛片水多多多| 免费电影在线观看免费观看| 简卡轻食公司| 国产黄片美女视频| 亚洲国产欧洲综合997久久,| 国产精品一二三区在线看| 国语自产精品视频在线第100页| 亚洲av.av天堂| 免费在线观看成人毛片| 一个人看的www免费观看视频| 免费不卡的大黄色大毛片视频在线观看 | 亚洲精品456在线播放app| 夜夜看夜夜爽夜夜摸| 一个人免费在线观看电影| 欧美最黄视频在线播放免费| av又黄又爽大尺度在线免费看 | 日韩在线高清观看一区二区三区| 91久久精品国产一区二区三区| 看黄色毛片网站| a级毛片a级免费在线| 中文字幕av在线有码专区| 97在线视频观看| 精品久久久久久久人妻蜜臀av| 一级毛片电影观看 | 少妇高潮的动态图| 国模一区二区三区四区视频| 99视频精品全部免费 在线| 高清毛片免费观看视频网站| 成人特级黄色片久久久久久久| 男人的好看免费观看在线视频| 欧美最新免费一区二区三区| 亚洲七黄色美女视频| 亚洲在久久综合| 激情 狠狠 欧美| 中文字幕av在线有码专区| 噜噜噜噜噜久久久久久91| 97超碰精品成人国产| 黄色视频,在线免费观看| 麻豆成人av视频| 国产黄片视频在线免费观看| 岛国毛片在线播放| 99riav亚洲国产免费| 免费观看在线日韩| 国产黄色视频一区二区在线观看 | 丰满乱子伦码专区| 成人永久免费在线观看视频| 日韩成人av中文字幕在线观看| 成人高潮视频无遮挡免费网站| 女人十人毛片免费观看3o分钟| 看十八女毛片水多多多| 午夜福利视频1000在线观看| 身体一侧抽搐| 国产亚洲av嫩草精品影院| 寂寞人妻少妇视频99o| 成人av在线播放网站| 亚洲精品乱码久久久久久按摩| 欧美色欧美亚洲另类二区| av在线观看视频网站免费| 韩国av在线不卡| 免费看a级黄色片| 91精品国产九色| 少妇丰满av| 精品久久久久久久久久久久久| 免费不卡的大黄色大毛片视频在线观看 | 能在线免费看毛片的网站| 亚洲电影在线观看av| 亚洲国产色片| 欧美日本亚洲视频在线播放| 成人二区视频| 精品一区二区免费观看| 免费观看精品视频网站| 激情 狠狠 欧美| 久久精品国产亚洲av涩爱 | 91久久精品电影网| 麻豆av噜噜一区二区三区| eeuss影院久久| 别揉我奶头 嗯啊视频| 国产精品免费一区二区三区在线| 联通29元200g的流量卡| 淫秽高清视频在线观看| 久久久久国产网址| 男人的好看免费观看在线视频| 两个人的视频大全免费| 日本撒尿小便嘘嘘汇集6| 91av网一区二区| 亚洲久久久久久中文字幕| 色综合亚洲欧美另类图片| 亚洲人成网站高清观看| 久久久精品94久久精品| 久久鲁丝午夜福利片| 国模一区二区三区四区视频| 身体一侧抽搐| 色视频www国产| 18禁黄网站禁片免费观看直播| 亚洲图色成人| 国产一区亚洲一区在线观看| 大又大粗又爽又黄少妇毛片口| 国产一区二区三区在线臀色熟女| 日韩国内少妇激情av| av卡一久久| 午夜福利在线观看免费完整高清在 | 在线a可以看的网站| 男人和女人高潮做爰伦理| 日韩av不卡免费在线播放| 女人被狂操c到高潮| 草草在线视频免费看| 精品久久久噜噜| 日韩强制内射视频| 三级经典国产精品| 在线免费十八禁| 久久人人精品亚洲av| 亚洲精品乱码久久久v下载方式| 深夜精品福利| 尾随美女入室| 18禁在线无遮挡免费观看视频| 色哟哟哟哟哟哟| 国产视频内射| 草草在线视频免费看| 精品久久久噜噜| 青春草亚洲视频在线观看| 岛国毛片在线播放| 一本一本综合久久| 亚洲成人精品中文字幕电影| 春色校园在线视频观看| 中文字幕av成人在线电影| 久久精品久久久久久久性| 久久这里只有精品中国| 欧美潮喷喷水| 亚洲七黄色美女视频| 全区人妻精品视频| 美女 人体艺术 gogo| 26uuu在线亚洲综合色| 久久久久久久亚洲中文字幕| av在线天堂中文字幕| 免费无遮挡裸体视频| 男人和女人高潮做爰伦理| 只有这里有精品99| 国产乱人偷精品视频| 久久人人爽人人爽人人片va| 欧美+日韩+精品| 一级毛片我不卡| 男女啪啪激烈高潮av片| 国产91av在线免费观看| 变态另类丝袜制服| 亚洲国产精品合色在线| 亚洲四区av| 人人妻人人澡欧美一区二区| 高清在线视频一区二区三区 | 搡老妇女老女人老熟妇| 欧美日韩一区二区视频在线观看视频在线 | 国产一区二区激情短视频| 久久精品国产亚洲av涩爱 | av在线观看视频网站免费| 日本在线视频免费播放| 有码 亚洲区| 天天一区二区日本电影三级| 男人和女人高潮做爰伦理| 亚洲自拍偷在线| 丝袜喷水一区| 听说在线观看完整版免费高清| 免费av不卡在线播放| 国产美女午夜福利| 国产高清激情床上av| 精品国内亚洲2022精品成人| 岛国在线免费视频观看| 边亲边吃奶的免费视频| 校园春色视频在线观看| 有码 亚洲区| 少妇高潮的动态图| 亚洲成人久久爱视频| 午夜a级毛片| av专区在线播放| 色播亚洲综合网| 国内少妇人妻偷人精品xxx网站| 国产精品蜜桃在线观看 | 欧美高清性xxxxhd video| 亚洲精品粉嫩美女一区| 亚洲色图av天堂| 成人性生交大片免费视频hd| 一区福利在线观看| 赤兔流量卡办理| 男女视频在线观看网站免费| 国产三级中文精品| 精品人妻一区二区三区麻豆| 舔av片在线| 在线观看免费视频日本深夜| 日本黄色片子视频| 亚洲综合色惰| 久久亚洲国产成人精品v| 久久久久九九精品影院| 国产av在哪里看| 国产综合懂色| 一个人免费在线观看电影| 亚洲中文字幕一区二区三区有码在线看| 久久久国产成人精品二区| 在线免费观看的www视频| 国产伦在线观看视频一区| 国产亚洲精品久久久com| 91av网一区二区| 99精品在免费线老司机午夜| 一个人观看的视频www高清免费观看| 大型黄色视频在线免费观看| 欧洲精品卡2卡3卡4卡5卡区| 狂野欧美激情性xxxx在线观看| 三级男女做爰猛烈吃奶摸视频| 少妇人妻精品综合一区二区 | 精品99又大又爽又粗少妇毛片| 成年女人永久免费观看视频| 变态另类成人亚洲欧美熟女| 亚洲成a人片在线一区二区| 免费不卡的大黄色大毛片视频在线观看 | 免费看av在线观看网站| 亚洲18禁久久av| 岛国毛片在线播放| 少妇人妻精品综合一区二区 | 国产单亲对白刺激| 一边亲一边摸免费视频| 亚洲色图av天堂| 久久久久性生活片| av又黄又爽大尺度在线免费看 | 成人毛片60女人毛片免费| 亚洲人成网站在线播| 久久久精品94久久精品| 国产亚洲精品久久久久久毛片| 久久久国产成人精品二区| 一边亲一边摸免费视频| 免费av不卡在线播放| 夜夜夜夜夜久久久久| 亚洲熟妇中文字幕五十中出| 成年版毛片免费区| a级毛色黄片| 亚洲熟妇中文字幕五十中出| 成年版毛片免费区| 欧美色欧美亚洲另类二区| 精品午夜福利在线看| 成年版毛片免费区| 亚洲成a人片在线一区二区| 亚洲熟妇中文字幕五十中出| 国产黄片美女视频| 日本黄色片子视频| 亚洲内射少妇av| 成人亚洲欧美一区二区av| 又爽又黄无遮挡网站| 国产精品三级大全| 亚洲人成网站在线播放欧美日韩| 嘟嘟电影网在线观看| 一级毛片电影观看 | 91aial.com中文字幕在线观看| 黄色欧美视频在线观看| 美女内射精品一级片tv| 免费看a级黄色片| 大又大粗又爽又黄少妇毛片口| 好男人视频免费观看在线| 国产真实伦视频高清在线观看| 可以在线观看毛片的网站| 性色avwww在线观看| www日本黄色视频网| 18+在线观看网站| 男插女下体视频免费在线播放| 看非洲黑人一级黄片| 久久亚洲国产成人精品v| 99在线视频只有这里精品首页| 九九久久精品国产亚洲av麻豆| 久久久久久久久久成人| 日韩 亚洲 欧美在线| 免费不卡的大黄色大毛片视频在线观看 | 亚洲久久久久久中文字幕| 深爱激情五月婷婷|