特種冶金生產流程的發展趨勢………………………姜周華,康從鵬,劉福斌,董艷伍,耿 鑫(1)
不銹鋼粉塵碳熱還原產物金屬顆粒形貌和尺寸……陳孝琦,鄭立春,何淑雅,姜周華,谷潔美(9)
GA-BP的鐵鋼界面鐵水溫度預測……………………畢春寶,張亞竹,石少元,郭亞祥,黃 軍(17)
輕燒菱鎂石粉對低硅含鎂球團礦孔隙和強度的影響…………………………………………………………………………………………………王曉哲,郭 晶,劉東輝,劉征建,王廣偉,張建良(23)
底吹鋼包內離散氣泡運動及界面波動對脫硫行為影響………………張麒格,李寶寬,王長軍(31)
氧燃槍噴吹工藝數值模擬研究……………………鄒 濤,戰東平,莊生磊,姜周華,張慧書(38)
山西高鐵鋁土礦溶出工藝試驗研究…………………………王紅偉,馬春玉,馬科友,張學英(45)
電石渣為鈣源的硅熱法煉鎂煅燒過程……………冀宗輝,韓繼標,郭軍華,傅大學,張廷安(50)
新型有機黏結劑HC用于制備冷壓球團的研究………………張學婕,丁學勇,劉金生,居天華(57)
菱鎂礦煅燒制備輕燒鎂正交試驗…………………薛 原,閻富生,胡賢忠,史金星,鄭 珂(64)
燒結溫度對NiFe2O4/TiN復合陶瓷惰性陽極材料性能的影響…………劉金莉,張志剛,曹卓坤(68)
基于JMatPro軟件的X12CrMoWVNbN10-1-1鋼析出相熱力學模擬和分析………………楊佳奇(74)
Development trend of special melting and remelting production process…………………………………………………………………Jiang Zhouhua,Kang Congpeng,Liu Fubing,Dong Yanwu,Geng Xin(1)
Morphology and size of the metallic particles generated via carbothermic reduction of stainless steel dust…………………………………Chen Xiaoqi,Zheng Lichun,He Shuya,Jiang Zhouhua,Gu Jiemei(9)
Prediction on temperature of hot metal on ironmaking and steelmaking interface based on GA-BP ………………………………………Bi Chunbao,Zhang Yazhu,Shi Shaoyuan,Guo Yaxiang,Huang Jun(17)
Effect of light burnt magnesite powder on pore and strength of low silicon magnesium pellet……………………Wang Xiaozhe,Guo Jing,Liu Donghui,Liu Zhengjian,Wang Guangwei,Zhang Jianliang(23)
Influence of discrete bubble movement and interface fluctuation on desulfurization behavior in the bottom-blown ladle furnace…………………………………………Zhang Qige,Li Baokuan,Wang Changjun(31)
Numerical simulation of oxygen lance injection process……………………………………………………………………………Zou Tao,Zhan Dongping,Zhuang Shenglei,Jiang Zhouhua,Zhang Huishu(38)
Experimental study on dissolving process of high-iron bauxite from Shanxi ……………………………………………………………………………Wang Hongwei,Ma Chunyu,Ma Keyou,Zhang Xueying(45)
Study on calcination process of magnesium smelting by silicothermic reduction with calcium carbide slag as calcium source………………Ji Zonghui,Han Jibiao,Guo Junhua,F(xiàn)u Daxue,Zhang Ting’an(50)
Study on preparation of cold-press pellets using new style organic binder HC…………………………………………………………………………Zhang Xuejie,Ding Xueyong,Liu Jinsheng,Ju Tianhua(57)
Orthogonal experiment on light burned magnesium from calcined magnesite…………………………………………………………………Xue Yuan,Yan Fusheng,Hu Xianzhong,Shi Jinxing,Zheng Ke(64)
Effect of sintering temperature on the properties of NiFe2O4/TiN ceramic inert anode…………………………………………………………………………………Liu Jinli,Zhang Zhigang,Cao Zhuokun(68)
Thermodynamic simulation and analysis of X12CrMoWVNbN10-1-1 steel precipitation based on JMatPro software……………………………………………………………………………………Yang Jiaqi(74)
魚雷罐耐材蓄熱及散熱模型的鐵水溫降…張亞竹,郭亞祥,張 瑞,畢春寶,石少元,黃 軍(79)
轉底爐內冶金粉塵還原過程數值模擬…………………………鄭占一,齊鳳升,劉中秋,李寶寬(85)
移動床內氣化反應特性的模擬………………………………孔全磊,劉軍祥,于慶波,段文軍(92)
攪拌器磨損對KR法脫硫攪拌效果的數值分析………………………………………………………………………………………………………龔昌運,但斌斌,牛清勇,歐陽德剛,劉 洋,閔昌飛(97)
新型側攪拌流化床氣-固流化質量的模擬…………………………………………………………………………………………………………………張圣禹,李小龍,王 濤,張子木,劉 燕,張廷安(104)
GCr15軸承鋼LF精煉終點MgO·Al2O3夾雜的形成機理…………………………………………………………………………………………………………雷家柳,楊 玲,王秀敏,趙棟楠,徐英杰(115)
泡孔結構對原位生成TiB2增強鋁基泡沫材料阻尼性能的影響 … ……鄭興璋,曹卓坤,張志剛(124)
介質溫度對耐高溫鐵素體不銹鋼點蝕行為的影響…………馬明玉,崔君軍,劉后龍,陳禮清(130)
高性能微合金化熱沖壓成形模具用鋼服役性能的影響…………………………………………………………………………………………………鄭朝輝,周彥君,蔡振雷,馬鳴圖,馮 毅,蔡志輝(136)
具有良好低溫韌性的大型丙烷儲罐用鋼研制…………………………陳凱力,王金光,陸戴?。?44)
Cu基非晶合金活化過硫酸鈉降解酸性橙………馬林林,祝金民,劉鈺龍,高美玉,李正坤(152)
Molten iron temperature drop based on the model of heat storage and heat dissipation of torpedo car(TPC)……………Zhang Yazhu,Guo Yaxiang,Zhang Rui,Bi Chunbao,Shi Shaoyuan,Huang Jun(79)
Numerical simulation of metallurgical dust reduction process in rotary hearth furnace………………………………………………………………Zheng Zhanyi,Qi Fengsheng,Liu Zhongqiu,Li Baokuan(85)
Simulation study on gasification reaction characteristics in moving bed…………………………………………………………………………………Kong Quanlei,Liu Junxiang,Yu Qingbo,Duan Wenjun(92)
Numerical analysis of the agitator wear on the agitating effect of KR desulfurization…………………………………Gong Changyun,Dan Binbin,Niu Qingyong,Ouyang Degang,Liu Yang,Min Changfei(97)
Simulation of gas-solid fluidization quality in new type of side-stirred fluidized-bed………………………………………Zhang Shengyu,Li Xiaolong,Wang Tao,Zhang Zimu,Liu Yan,Zhang Ting’an(104)
Formation mechanism of MgO·Al2O3inclusion after LF refiningfor GCr15 bearing steel ………………………………………………Lei Jialiu,Yang Ling,Wang Xiumin,Zhao Dongnan,Xu Yingjie(115)
Effect of foam structure on the damping performance of aluminum foam reinforced by in-situ TiB2particles………………………………………………Zheng Xingzhang,Cao Zhuokun,Zhang Zhigang(124)
Effect of media temperature on the pitting corrosion behavior of anti-high temperature ferritic stainless steel……………………………………………Ma Mingyu,Cui Junjun,Liu Houlong,Chen Liqing(130)
Design,heat treatment process and service performance of high performance microalloyed hot stamping die steel……………Zheng Chaohui,Zhou Yanjun,Cai Zhenlei,Ma mingtu,F(xiàn)eng Yi,Cai Zhihui(136)
Development of large-scale propane tank steel with excellent low-temperature toughness………………………………………………………………………………Chen Kaili,Wang Jinguang,Lu Daiding(144)
The decolorization properties of acid orange by sodium persulfate activated with Cu-based amorphous alloy………………………………Ma Linlin,Zhu Jinming,Liu Yulong,Gao Meiyu,Li Zhengkun(152)
弓形浸漬管RH混合傳質均勻性的數值模擬………………孫國敏,羅志國,任志峰,鄒宗樹(159)
轉杯?;b置中高爐渣顆粒換熱特性模擬……………………………徐國偉,秦 勤,于慶波(167)
步進式加熱爐富氧MILD燃燒流場與溫度場的數值模擬…傘俊博,秦 勤,趙 俁,于慶波(173)
堿度對CaO-SiO2-Al2O3系熔渣微觀結構的影響…趙 旋,張 蕊,賈吉祥,亓 捷,閔 義(179)
復合磁場作用下板坯結晶器內流場與溫度場的數值模擬………………………………………………………………………………………………………………楊宇威,蘇志堅,陳 進,范 圍(185)
硅熱還原煉鎂中固體廢渣的氨浸提鈣……………嚴艷文,劉 燕,毛帥東,李小龍,張廷安(192)
蜂窩狀催化劑的制備及其低溫脫硝活性……………張帥帥,于慶波,秦勤,張存超,高云柯(198)
泡沫鋁夾芯板水下抗爆性能的實驗和數值模擬………………………朱芮鋒,曹卓坤,張志剛(204)
臨界淬火對超厚水電鋼沖擊韌性的影響……………………………………………………………………………………………………………陳星宇,馮路路,宋增強,喬文瑋,李萍萍,吳開明(211)
熱處理工藝對近α鈦合金組織與性能的影響………………孫 鵬,孫瑞琦,王偉龍,崔文芳(217)
連續擠壓純銅扁線的不均勻組織與性能…………………………………………………………………………………………………王 昕,薛俊鵬,李博軒,李洪曉,任玉平,楊緒清,楊立山(223)
芯片用液態金屬散熱器的數值模擬………………蔡嘉瑞,魏玉乾,宋雯煜,劉 慧,晏文杰(232)
Numerical simulation of the uniformity of mixed mass transfer in RH with arched snorkels……………………………………………………………Sun Guomin,Luo Zhiguo,Ren Zhifeng,Zou Zongshu(159)
Simulation study on heat transfer characteristics of blast furnace slag particles in rotor granulation device……………………………………………………………………Xu Guowei,Qin Qin,Yu Qingbo(167)
Simulation study on the flow and temperature field of Oxy-MILD in walking heating furnace ………………………………………………………………………San Junbo,Qin Qin,Zhao Yu,Yu Qingbo(173)
Effect of basicity on the microstructure of molten slag of CaO-SiO2-Al2O3system…………………………………………………………………………Zhao Xuan,Zhang Rui,Jia Jixiang,Qi Jie,Min Yi(179)
Numerical simulation of fluid flow and temperature field of slab under composite magnetic field…………………………………………………………………Yang Yuwei,Su Zhijian,Chen Jin,F(xiàn)an Wei(185)
Ammonia leaching of calcium from the waste residue in magnesium smelting by silicothermic reduction……………………………Yan Yanwen,Liu yan,Mao Shuaidong,Li Xiaolong,Zhang Ting’an(192)
Preparation and low temperature denitrification activity of honeycomb catalyst…………………………………………………………Zhang Shuaishuai,Yu Qingbo,Qin Qin,Zhang Cunchao,Gao Yunke(198)
Experimental and numerical study on underwater explosion resistance of aluminum foam sandwich………………………………………………………………Zhu Ruifeng,Cao Zhuokun,Zhang Zhigang(204)
Effect of critical quenching on impact toughness of ultra-thick Hydropower Steel………………………………………Chen Xinyu,F(xiàn)eng Lulu,Song Zengqiang,Qiao Wenwei,Li Pingping,Wu Kaiming(211)
Effect of heat treatment process on microstructure and mechanical properties of a near-alpha titanium alloy……………………………………………Sun Peng,Sun Ruiqi,Wang Weilong,Cui Wenfang(217)
Non-uniform microstructure and property of continuous extrusion pure copper flat wire……………………Wang Xin,Xue Junpeng,Li Boxuan,Li Hongxiao,Ren Yuping,Yang Xuqing,Yang Lishan(223)
Numerical simulation of chip heat dissipation using liquid metal…………………………………………………………………………………Cai Jiarui,Wei Yuqian,Song Wenyu,Liu Hui,Yan Wenjie(232)
含碳球團氣固協同還原特點及動力學研究………柴志鵬,丁學勇,居天華,劉金生,劉程宏(239)
應用Fick定律計算CO/H2+N2混合氣體還原鐵礦石動力學參數的偏差………………………………………………………………………………………………………孟繁超,邵 磊,鄒宗樹(246)
煤矸石和褐煤的球磨與制團試驗………朱帥令,曲 揚,姚 智,吳林麗,羅洪杰,佟國平(251)
高鐵鋁土礦分步硫酸高溫浸出的性能 ……………………………趙愛春,張廷安,呂國志(256)
錳礦預熱窯內氣固換熱的數值模擬 ……………………丁 寧,榮文杰,李寶寬,穆永鴻(261)
發泡工藝對泡沫鋁夾芯板孔結構及壓縮性能的影響…………………………………………………………………………………………………………韓楠丁,張曉光,孫 溪,黃 鵬,祖國胤(268)
基于Legendre多項式的板形模式識別優化仿真及應用…………………………王海霞,王慶華(275)
焦?fàn)t煤氣冷-熱-電三聯供系統構建及能量和火用分析…………………毛 成,馮明杰,郭 奕(282)
固體電蓄熱裝置結構優化及蓄放熱特性的模擬………………………黃新晨,秦 勤,于慶波(290)
邊界條件對橢球顆粒在超臨界水中受力與傳熱特性影響的數值模擬…………………………………………………………………………………………………熊 勃,張 浩,郭鵬越,安希忠(297)
事件和數據融合的加熱爐煤氣消耗量預測方法……………劉書含,孫文強,范天驕,謝國威(304)
MF-ZrF4(M=Li,Na,K)體系離子結構的Raman光譜研究…………………………………………………………………………………于江玉,胡憲偉,劉成員,康銥瀟,張一帆,石忠寧,王兆文(310)
Study on the characteristics and kinetics of gas-solid reduction of iron ore-coal composite pellets ………………………………Chai Zhipeng,Ding Xueyong,Ju Tianhua,Liu Jinsheng,Liu Chenghong(239)
An analysis of deviations arising from calculation of kinetic parameters by applying Fick’s Law in iron ore reduction with CO/H2and N2gas mixtures………Meng Fanchao,Shao Lei,Zou Zongshu(246)
Experimental study on ball milling and briquetting of coal gangue and lignite …………………………………………………Zhu Shuailing,Qu Yang,Yao Zhi,Wu Linli,Luo Hongjie,Tong Guoping(251)
High temperature leaching performance of aluminum in the process of sulphuric acid leaching of high-iron bauxite by two steps………………………Zhao Aichun,Zhang Ting’an,Lv Guozhi(256)
Numerical simulation of gas-solid heat exchange in manganese ore preheating kiln ……………………………………………………………………Ding Ning,Rong Wenjie,Li Baokuan,Mu Yonghong(261)
Effect of foaming conditions on the pore structure and compression properties of aluminum foam sandwich panels…………Han Nanding,Zhang Xiaoguang,Sun Xi,Huang Peng,Zu Guoyin(268)
Optimization simulation and application of flatness pattern recognition based on legendre polynomial………………………………………………………………………………Wang Haixia,Wang Qinghua(275)
Energy and exergy analysis for a coke oven gas based CCHP system ………………………………………………………………………………………………………Mao Cheng,F(xiàn)eng Mingjie,Guo Yi(282)
Simulation on structure optimization and heat storage and release characteristics of solid electric heat storage device……………………………………………Huang Xinchen,Qin Qin,Yu Qingbo(290)
Numerical investigation on the effect of boundary condition on momentum and heat transfer of spheroids in supercritical water…………………………Xiong Bo,Zhang Hao,Guo Pengyue,An Xizhong(297)
A hybrid event-driven and data-driven method for predicting the gas consumption of reheating furnaces………………………………………………Liu Shuhan,Sun Wenqiang,F(xiàn)an Tianjiao,Xie Guowei(304)
Ionic structure characterization of MF-ZrF4(M=Li,Na,K)systems by Raman spectra analysis……………………………………………………………Yu Jiangyu,Hu Xianwei,Liu Chengyuan,Kang Yixiao,……………………………………………………Zhang Yifan,Shi Zhongning,Wang Zhaowen(310)