• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Modeling and analyzing point cloud generation in missile-borne LiDAR

    2020-04-09 18:37:18MinleLiYihuaHuNanxiangZhaoQishuQian
    Defence Technology 2020年1期

    Min-le Li ,Yi-hua Hu ,*,Nan-xiang Zhao ,Qi-shu Qian

    a State Key Laboratory of Pulsed Power Laser Technology,College of Electronic Engineering,National University of Defense Technology,Hefei,230037,China

    b Anhui Province Key Laboratory of Electronic Restriction Technology,Hefei,230037,China

    Keywords:LiDAR Point cloud Precise guidance Vibration

    ABSTRACT The missile-borne LiDAR has an essential prospect in precise guidance.How ever,the instability of the missile has a significant impact on the precision of LIDAR point cloud,thus modeling and analyzing the influencing factors of point cloud generation is necessary.In this investigation,the authors modeled the point cloud calculation process of missile-borne linear array scanning LiDAR under ideal conditions and analyzed the effect of position change on the field of view(FOV)in the course of platform motion.Subsequently,the authors summarized that the stability concerning the field of view and the target tracking are dependent on three limiting conditions.Finally,the authors derived an error formula and analyzed several typical errors in missile platform flight,including scanner error,POS error,system integration error,and platform vibration error.Based on theoretical analysis and simulation experiments,the model proposed in this paper can provide a theoretical basis for the design of the missile-borne LiDAR system and the selection of related instruments in practice.?2020 China Ordnance Society.Production and hosting by Elsevier B.V.on behalf of KeAi Communications Co.This is an open access article under the CC BY-NC-ND license(http://creativecommons.org/licenses/by-nc-nd/4.0/).

    1.Introduction

    Precision guided weapons have become an indispensable part of modern warfare because of their high hit rate,great combat effectiveness,and deterrence.Therefore,this type of weapon has attracted close attention worldwide[1-3].Precision guidance weapons include radar guidance,infrared guidance,television guidance,and laser guidance.Laser imaging guidance technology has the advantages of high resolution,strong anti-jamming ability,and all-weather combat,and is attracting more and more research attention[4].

    The United States is at the forefront of the world in the research of Light Detection and Ranging(LiDAR)guidance[5].Since the 1980s,many military scientific research institutes in the United States have developed three-dimensional LiDAR seekers.At present,LiDAR seekers with specific algorithms have the ability of automatic target recognition.Multiple types of missiles are equipped with this type of LiDAR seeker.For example,the United States Army Research Laboratory(ARL)and other units have developed and tested low-cost autonomous attack system(LOCAAS),which is a highly intelligent,unmanned aircraft launched outside the defense zone.The LOCAAS seeker has the ability of three-dimensional imaging of the target.It can scan accurately and autonomously at a rate of 100 Hz,and the scanning width is750 m.Once the target is captured,the scanning width will be reduced to 100 m,the field of view angle is 4-6°,the operating distance is 1-1.25 km,and the resolution can be achieved to 15 cm.The target identification algorithm has an advanced feature extraction function.Since 1999,the United States has been developing a Flash LiDAR,the non-scanning three-dimensional imaging LiDAR,the imaging rate of which is at least five times higher than that of the scanning imaging LiDAR used in the previous LOCASS.NetFires(Network Fires,Network Fire Support)is a joint project proposed by DARPA and Army of the United States.It aims to provide the Army with the next generation of attack and patrol precision-guided missiles.The patrol attack missiles of NetFires weapon system are equipped with active LiDAR seekers that can automatically identify targets at 230 m altitude and 400 km/h speed.Besides,the general LiDAR seeker and the“vertical saw”imaging LiDAR system in the United States also use threedimensional imaging technology,which can automatically identify targets in various environments[5].

    As for the researches on LiDAR modeling,there are many achievements in the research of LiDAR simulation all over the world[6].O.Kechagias-Stamatis[7]evaluated 3D local descriptors and proposed an architecture[8]for future missile seeker with automatic target recognition(ATR)capabilities.Many research institutes,such as Oktal Synthetic Environment Company of France[9]and the Swedish National Defense Research Bureau[10],have developed and put into use the simulation platform of LiDAR.Huazhong University of Science and Technology[11]established an airborne dual-w edge LiDAR simulation platform,and obtained point cloud images in different scenarios,but the single-point scanning efficiency is lower than linear array scanning LiDAR.Scanning LiDAR is simulated and modeled by National Defense University[12].Range and intensity images are obtained by analyzing the echo information in each beam,but the action distance is relatively close,and the scanning period is longer than linear array scanning LiDAR.

    At present,there is no missile-borne LiDAR simulation platform in China.As for the researches on platform motion error analysis,since the related literatures on missile-borne LiDAR point cloud motion error analysis are seldom published,this part review s the published research works about image distortion correction of the missile-borne infrared imaging guidance system and related research on motion errors of satellite-borne and airborne LiDAR,so as to provide a reference for related research of missile-borne LiDAR.H Richard et al.[13]studied the image distortion caused by aero-optics of the supersonic aircraft,measured the wavefront parameters by the background oriented schlieren(BOS)technique,and obtained the offset of all targets on the imaging surface by difference method.CSANYI et al.[14]corrected the point cloud error of airborne LiDAR by setting markings on the ground.Dickman et al.[15]studied the influence of posture angle random measurement error on airborne LiDAR plane terrain imaging through numerical simulation but did not carry out more complex terrain simulation.Wang et al.[16]analyzed the causes of measurement errors affecting the accuracy of airborne laser scanning point clouds.By analyzing the working principle of conical rotating airborne laser scanning,the mapping relationship between error factors and point clouds accuracy was established.The equation between error factors and three-dimensional coordinate errors of point clouds was established by multiple linear regression method,and the causes of errors were quantitatively evaluated.The significant effect of the element on accuracy provides a theoretical basis for error allocation and suppression and compensation of essential factors in the airborne laser scanning system.

    Based on our literature review,we found that those exist studies cannot be applied to point cloud generation and motion error analysis of missile-borne linear array scanning LiDAR.Because of the high cost of research and development of the missile-borne platform,using an accurate system simulation model to guide practice is necessary.Besides,the movement of the platform often leads to the distortion of point cloud acquired by LiDAR in the process of scanning,and relevant research needs to be carried out.

    In this paper,firstly,the point cloud calculation process of missile-borne linear array scanning LiDAR under ideal conditions is modeled.On this basis,the effect of posture change on the field of view in the course of platform motion is analyzed,and three limiting conditions are put forward.Only when these conditions are satisfied,the stability of the field of view can be guaranteed,and the target tracking can be carried out.Finally,the authors derived an error formula and analyzed several typical errors in missile platform flight,including scanner error,POS error,system integration error,and platform vibration error.

    2.Material and methods

    2.1.The method of calculating point cloud coordinates of missileborne LiDAR

    Fig.1 shows the scanning principle of linear scan LiDAR system for ground targets,and the beam vector of LiDAR is set as S.The direction of laser emission is Y axis,the direction of pitch angle increase is Z axis,and the X axis is determined according to the right hand rule.For the missile-borne LiDAR system,the starting point Vs(xV,yV,zV)Tis the platform of the optical system and can be measured by dynamic differential GPS.The mode of S represents the distance between the optical system and the ground laser foot and the direction of S is the platform posture parameter(α,β,γ)as pitch-yaw-roll,which can be obtained by the high-precision posture measuring device.According to the above parameters,the three-dimensional coordinates of the ground point P in the geodetic coordinate system can be calculated.The system can acquire high-precision laser point cloud data by continuously transmitting laser pulses and receiving echo information through scanning.

    The difficulty of simulation technology of missile-borne Linear Array scanning LiDAR is that there are great differences in the motion of missiles,not only in flight speed but also in rotation speed.For each laser landing point,the collected information includes the range information from the landing point to the LiDAR(1D),the real-time position information(3D),the platform posture(3D),the position and posture relationship between the platform and the laser(6D)and the beam splitting angle(1D).More than 14 dimensions to calculate the position of each landing point.

    In order to facilitate analysis,Fig.2 shows the coordinate system.The black coordinate system in Fig.2 represents the local coordinate system:take the point projected to the ground from the original position of the missile as the origin,the vertical upward axis is the Z-axis,and the forward direction of the missile is the Y axis.The X axis is determined according to the right-hand rule.The blue coordinate system in Fig.2 represents the instantaneous coordinate system:the direction of laser emission is Y′axis,the direction of elevation increase is Z′axis,and the X′axis is determined according to the right hand rule.The 64-line lasers are calibrated with serial numbers 1 to 64 in the positive direction of X′-axis,and the 32nd laser is aligned with the Y′-axis.

    Four steps accomplish the calculation of point cloud.

    First,the coordinates of the landing point in the instantaneous coordinate system are calculated according to the distance and beam splitting information.For the n th unit time,the coordinates of the laser point corresponding to the linear array laser beam are as follows:

    Fig.1.Missile-borne linear array LiDAR system for target detection and tracking.

    Fig.2.Instantaneous scanning coordinate system and platform coordinate system.

    Among them,snrepresents the distance between 64 laser beams at the n th unit time and αn=-15.5·16 mrad is the row vector formed by the angle between the corresponding 64 laser beams and the Y’axis.

    Second,according to the position and posture relationship between the laser and the platform,the instantaneous coordinate system is converted to the platform coordinate system,as shown by Eq.(2).

    Third,according to the real-time position and posture information of the platform itself in the local horizontal reference coordinate system,the coordinates are transformed into the local horizontal reference coordinate system.

    Here,the transformation matrix RN=RφN·RθN·RφNrepresenting the platform coordinate system to the local horizontal coordinate system is related to the posture angles in the three directions of rotation,pitch,and yaw,and the form is similar to Eq.(3).λN=(xN,yN,zN)Trepresents the eccentricity between the phase center of the GPS antenna and the inertial platform.

    Moreover,to convert the local horizontal coordinate system to the WGS-84 coordinate system.where,the transformation matrixrepresenting the platform coordinate system to the local horizontal coordinate system is related to three posture angles in a form similar to Eq.(3).represents the coordinates of the phase center of the GPS antenna in the WGS-84 coordinate system.

    In summary,the coordinates of the laser point in WGS-84 coordinate system are as follows:

    Simplified to vector form,

    where,r represents the position vector of the laser point in the instantaneous coordinate system and PWis the coordinate of the laser foot in the WGS-84 coordinate system.

    2.2.The effect of motion on point cloud calculation

    The flight altitude of the missile can reach several kilometers.We utilized a 64-element linear array scanning laser radar,with the interval of each beam being 0.5 mrad and the instantaneous field of view range being 32 mrad.The laser frequency is 10 k Hz,and the frame frequency is 20 Hz,and each frame has 500 scans.At this altitude,the influence of translation motion of missile on point cloud computing can be neglected,but the influence of posture change and the vibration is larger.Thus it must be considered.By analyzing the influence level of these two factors,this paper provides a reference for the selection of the gyro platform and shock absorber.

    2.2.1.Three limiting conditions of posture change on the field of view

    In order to achieve precise guidance,it is necessary to ensure that the overlapping field of view of two adjacent frames has a larger overlap area,so as to ensure that the target is not lost.For the terminal guidance of the missile,the forward-looking method is used to detect the missile.The effect of the translation motion on the field of view is relatively small,while the change of posture will have a more significant impact.According to the different speed of posture change,we put forward three limiting conditions.Only when these three conditions are satisfied,the stability of the field of view can be guaranteed.

    1)The limiting condition of coincidence of transmitting and receiving footprints:the scanning time of a complete frame of the point cloud is 0.05 s,and each scanning time is t0= 10-4s.The distance between transmitting and receiving is r and the time internal is Δt=2r/c.When the distance is within[500,7000]m,it can be calculated that 3.33×10-6≤Δt≤4.67×10-5s.The field of view of a single receiving unit is Ω=5×10-4rad,and when the posture changes at a speed of=10.71 rad/s(1.7r/s),the signal cannot be received.

    2)Limiting condition of the field of view regularization:for two adjacent scans,if the angle and position deviation is too large,it will not be able to achieve parallel or approximate parallel relationship.According to the above analysis,when the posture change speed is less than 10.71 rad/s,it can ensure effective reception.At this time,the rotation angle is taken as an example to consider the parallel situation of adjacent scans.Because the time interval between two adjacent scans is t0=10-4s,the rotation angle difference between two adjacent scans is 1.07 mrad,namely 0.061°,and within a frame(500 scans)the total deviation is 30.65°.The irregular change of the field of view makes it difficult to achieve continuous and practical coverage of the target.The setting of limiting conditions for target reconstruction is more of empirical value.

    3)Limiting condition of overlap of the adjacent field of view:the system covers a limited field of view.When the posture changes too fast,the overlap of adjacent two frames is too small,resulting in the loss of the target.A complete frame point cloud can cover 32 mrad in the scanning direction by oscillating the pendulum mirror to and fro in the scanning time of tf=0.05 s,thus the speed of the pendulum mirror is about Ωr≈0.032 rad/0.05 s=0.64(rad/s).The posture angle changes at different speeds˙α,which will also have a significant impact on the unfolding effect of the scanning.The new coverage is expressed as Ω′=(Ωr-˙α)tf.It can be divided into the following three situations:

    (1)The change speed of posture angle is less than the swing speed of the swing mirror.If the direction is opposite,the coverage will be reduced(between 0 and one times),and if the direction is the same,the coverage will be increased(between 1 and two times).

    (2)The change speed of posture angle is equal to the swing speed of the swing mirror.If the direction is opposite,the coverage will be reduced to 0,and the scanning cannot be deployed effectively.If the direction is the same,the coverage will be increased by two times.

    (3)The change speed of posture angle is faster than the swing speed of the swing mirror.If the direction is opposite,the coverage will extend to the opposite direction;if the direction is the same,the coverage will increase.

    It is evident that when the change speed of posture angle is equal to or higher than the swing speed of the swing mirror,the coverage of the front and rear field of view will change significantly,even without overlap.This situation can easily lead to the loss of targets.Therefore,it should be less than half of the swing speed of the pendulum mirror,i.e.˙α<0.32(rad/s).Under the above limiting conditions,it is necessary to select the appropriate servo device to solve the problem and eliminate the rapid posture change.At the same time,miniaturization design should be taken into account.

    2.2.2.Effect of motion error on generating the point cloud

    The error of LiDAR can be roughly divided into the following categories:

    (1)Scanner errors,including ranging errors and scanning angle errors;

    (2)POS error,namely GPS error and INS error;

    (3)System integration errors,including installation errors,time deviations.

    (4)Other errors,including coordinate transformation errors,errors caused by the irregular motion of the platform,elevation errors of type II,and some random errors.

    Considering various errors,Eq.(8)shows the geometric model of the missile-borne LiDAR

    where,P*Wis the position vector of laser foot under the WGS-84 coordinate system affected by various errors.The term ΔRNrepresents the rotation matrix of the platform posture angle measurement error and ΔRPindicates the system placement error rotation matrix.ΔλPNmeans the measurement error of eccentricity component from laser launching point to GPS antenna phase center.Moreover,theΔλ84is the positioning error vector of GPS while ΔλTBrepresents the position error vector caused by time deviation.

    2.3.Error effect of scanner

    (1)Ranging error.Laser scanning ranging errors are attributed to the following aspects[17].The first point is the instrument error.It includes the non-parallel errors of laser signal transmitting and receiving,the measurement errors of laser pulse signal propagation time,the rotation and vibration errors of the reflector,and the zero-point errors of the pulse.The second point is the atmospheric refraction error.When the laser penetrates the atmosphere,it is also affected by the refraction error of the atmosphere(troposphere).The degree of influence is related to the wavelength of the laser pulse.The atmospheric refraction error of the same signal is related to temperature,pressure,and humidity.The wavelength of the laser pulse is about 1μm,while that of the GPS carrier signal is about 20 cm.Therefore,compared with GPS signal,the laser pulse signal is much less affected by atmospheric refraction,and the absolute amount of tropospheric delay improvement in zenith direction is only a few millimeters,which is much smaller than the accuracy of LiDAR measurement at present.After simple model modification,the residual error can be neglected.The third point is errors related to the reflector.Different physical characteristics of the surface will produce different reflections.When diffuse reflection occurs,a large number of backscattering signals are received,resulting in larger receiving noise.On the contrary,if the signal is transmitted to a smooth surface,mirror reflection is formed,and backscattering signals are very few.Besides,if angular reflection occurs,backscattering may be the result of multiple reflections.Thus the measured time delay cannot represent real-time delays.The ranging accuracy is also related to the roughness of the ground,the slope of the terrain and the interference of the ground objects.Generally speaking,after system error correction,the ranging error of laser scanning can be controlled in a minimal range and can be neglected.

    Fig.3.Point cloud data of typical 3D models.

    Table 1 The simulation information of typical 3D models.

    (2)Scanning angle error.The scanner uses the scanning prism to turn the laser beam from different angles by driving the motor.Non-uniform speed of the scanning motor,the vibration of the scanning mirror,temperature change,and beam divergence angle[18]also bring errors to the scanning angle.Scanning angle error will affect the coordinates of laser foot in the instantaneous coordinate system by converting to ranging error and posture angle error.There are three main types of scanning errors:the instantaneous scanning angle error,the pointing error,and the Scanning plane distortion.When a laser scanner is installed,the laser scanning plane cannot be completely perpendicular to the xaxis of the laser coordinate system,resulting in distortion of the scanning plane.These are small angle values,usually a few percent[19].

    2.4.POS error effect

    Fig.4.Effect of motion on scanning field of view.

    GPS measurement data to determine the position of the aircraft platform and sensor.In the process of GPS dynamic positioning,it will be affected by tropospheric delay error,ionospheric delay error,satellite clock difference,phase center instability,observation noise,multi-path effect,and so on.GPS positioning error is the main factor affecting the accuracy of laser foot,but because it will change with the change of the detection environment,it is not easy to eliminate and model.It is difficult to eliminate these errors in the later data processing.The main work to reduce GPS positioning error is in data acquisition,which can be reduced by establishing multiple ground reference stations uniformly in the measuring area.In the actual operation process of the airborne platform,more than three ground reference stations should be placed,and the distance between ground references stations should not be more than 25 km.Better results can be obtained by GPS solution.At present,the best GPS positioning error is about 5 cm[20].How ever,the missile-borne platform cannot set up a large number of ground reference stations,and can only compensate for the corresponding losses by choosing instruments with higher accuracy.

    Fig.5.Effect of vibration on point cloud calculation accuracy.

    Posture measurement error is one of the factors affecting the positioning accuracy of the LiDAR system.By connecting the rigid IMU with the laser scanner,the posture of the two is the same.IMU posture measurement accuracy will be affected by accelerometer proportional error,velocimeter constant error,random drift,gyroscope system drift,and other factors.Besides,posture angle error varies with time and measurement location[19].At present,according to the international advanced GPS/INS combination accuracy level,the yaw angle can reach 0.005°,while the roll angle and the pitch angle can reach 0.0025°.

    2.5.Effect of system integration error

    The first point is the installation error.The most critical error is the boresight error between scanner and IMU.Installation of LiDAR measurement system requires that the coordinate axes of the laser scanning coordinate system and inertial platform reference coordinate system are parallel to each other,but there will be errors in installation.The placement angle error should also include the translation error between the coordinate systems of each instrument,namely,the eccentricity error.Generally speaking,the placement angle error needs to be measured by platform calibration.

    The second point is the time deviation.Time deviation includes synchronization error and interpolation error.In order to realize the three-dimensional positioning of the target,the orientation,positioning,and ranging of the LiDAR system must be carried out at the same time.It cannot guarantee the complete synchronization of time,which cause variable positioning error.When the platform is in a stable flight state,the influence of time deviation between ranging and posture angle measurement can be ignored.On the contrary,when the platform is not stable,the time deviation will have a great impact on the accuracy of the three-dimensional measurement.The interpolation error is caused by the different sampling frequencies of each subsystem in the platform-borne LiDAR.The sampling frequency of GPS data is the lowest,generally 1-20 Hz,and the sampling frequency of INS is about 200 Hz while the highest of the scanner is 500 k Hz.Therefore,interpolating INS posture data and GPS data with low sampling rate is necessary,and using GPS position,posture interpolation between adjacent scanning lines leads to interpolation error.The time deviation is manifested in the following characteristic[19].

    2.6.Influence of platform vibration error

    Different platforms have different vibration factors.The vibration affects the missile-borne LiDAR positioning equation by generating scanning angle error,placement angle error,and flight trajectory error,resulting in inaccurate point cloud calculation.Usually,the offset of the vibration to the three directions of x,y and z cannot cause large data deviation in practice.However,the impact of vibration on the collective positioning accuracy caused by missile-borne LiDAR cannot be neglected.If the corresponding measures are not taken to prevent the impact of vibration,the error caused by vibration will reduce the measurement accuracy of LiDAR.The traditional error correction method based on the datadriven polynomial model is difficult to eliminate its influence.Thus it is necessary to add appropriate shock absorber.

    3.Results

    3.1.Testing of point cloud calculation method

    In order to verify the point cloud calculation method,we establish a simulation environment.We input the object or scene to be scanned into the simulation system and convert the input data into the instantaneous coordinate system of the missile.Because the model is usually composed of several triangular slices,we use ray-tracing method[21]to obtain the intersection point of laser beam and target and record the distance value,the position value and the posture information of platform.The point cloud computing method we proposed is precisely using the above information to complete the point cloud coordinate calculation.

    The simulation conditions are as follows:the laser radar sensor platform is a missile,and its distance from the origin of the target scene coordinates sets to 3000 m.The flight speed is 1 Mach,and the rotating speed is 1 r/s.The elevation angle of the laser beam center direction relative to the target scene coordinate system is 30°,and the azimuth angle is set to 0°.The parameters of the laser radar system simulated in this paper are as follows:repetition frequency is 10 KHz,the frame frequency is 20 Hz.Thus,each frame has the most point cloud images.64×500 points can be obtained,and the divergence angle of the laser beam is 0.5 rad.Computer environment is CPU,Intel Core i5,4-core 3.3 GHz;memory,4 GB.

    The experimental results Fig.3 and Table 1 show that the proposed model can calculate the point cloud of LiDAR satisfactorily,and the obtained point cloud data can depict the shape and surface structure of the object in a specific perspective more truthfully,thus providing the original data for precise guidance.It is worth noting that the distribution of point clouds will be sparser when the distance is longer.It is difficult to detect small targets.Although the density of point clouds can be improved by increasing resolution,it will also increase the power and cost of lasers.Therefore,the choice of equipment needs to weigh these two factors.

    Fig.6.Point cloud deviations on the x,y and z axes.

    3.2.Simulation analysis of the influence of motion on the field of view

    In the influence of motion on the field of view,we simulate and analyze the limiting conditions.When the rotation speed is reduced to 1r/s,˙α=2π(rad/s),the remaining conditions remain unchanged with Section 3.1.In order to observe the effect of motion on the field of view,we scan the ground and summarized the simulation results as follow s:

    As can be seen from the Fig.4,at the condition of˙α=2π(rad/s),it can ensure that the front and back frames have an extensive range of overlap and the continuous coverage of the target.In practical application,because of the increase of follow-up devices,the actual posture changes will be less than the simulation conditions,and the actual detection field of view obtained can also achieve a relatively large coincidence effect.As far as possible to ensure that the target is always in the field of view in the course of platform movement can provide a prerequisite for the development of target tracking and precise guidance.

    3.3.Simulation analysis of the effect of vibration on point cloud quality

    Fig.5(a)and Fig.5(c)show point clouds under ideal conditions and point clouds under vibration conditions.Fig.5(c)shows two contrast effects.According to Fig.5,the vibration will affect the accuracy of point cloud calculation.

    Figs.6(a)-(c)are the point cloud deviations under ideal conditions and vibration conditions on the x,y and z axes,respectively.According to Figs.6(a)-(c),the difference among the three axes tend to impact the accuracy of the target position.How ever,when the vibration is controlled in a specific range,the influence of the vibration is not significant.Figs.6(d)-(f)show the maximum error on the x,y,and z axes at 0-500 unit times,respectively.According to the above analysis,the corresponding hardware or software measures need to be taken to reduce the impact of vibration.

    4.Conclusions

    In this study,the factors influencing the calculation of point cloud for missile-borne linear array scanning LiDAR are modeled and analyzed.First,we model the point cloud calculation process of missile-borne linear array scanning LiDAR under ideal conditions.The experimental results show that the calculation method is effective.On this basis,in order to track the target,we analyze the effect of posture change on the field of view in the course of platform movement and propose three limiting conditions.Only when these conditions are satisfied,the stability of the field of view can be guaranteed,and the conditions for tracking can be provided.Finally,we establish error formulas and analyze several typical errors in missile platform flight,including scanner error,POS error,system integration error,and platform vibration error.Through theoretical analysis and simulation experiments,the model proposed in this paper can provide a theoretical basis and parameters for the design of the missile-borne LiDAR system and the selection of related instruments in practice.In the subsequent calculation,target detection and tracking algorithm should be studied in combination with guidance law.

    Funding

    This research was financially supported by the China National Natural Science Foundation(Grant No.61871389),the Research Plan Project of the National University of Defense Technology(Grant No.ZK18-01-02)and the Director Foundation of State Key Laboratory of Pulsed Power Laser Technology (Grant No.SKL2018ZR09).

    Declaration of competing interest

    The authors declare that there is no conflict of interest.

    亚洲伊人色综图| 久久久久网色| 亚洲国产av影院在线观看| 亚洲中文av在线| 国产成人系列免费观看| 午夜福利影视在线免费观看| 午夜激情久久久久久久| 亚洲欧美精品自产自拍| www.av在线官网国产| 国产成人欧美| 丰满少妇做爰视频| 欧美另类一区| 精品久久久久久电影网| 交换朋友夫妻互换小说| 两个人免费观看高清视频| 嫩草影视91久久| 丝袜美足系列| 在线观看免费高清a一片| 69精品国产乱码久久久| 国产精品一区二区在线观看99| 波多野结衣av一区二区av| 婷婷色av中文字幕| 国产免费一区二区三区四区乱码| 99久久精品国产亚洲精品| 国产成人精品无人区| 宅男免费午夜| www.自偷自拍.com| 国产亚洲精品一区二区www | 久久久久精品国产欧美久久久 | 久久久久国产一级毛片高清牌| 亚洲av欧美aⅴ国产| 国产一区二区三区综合在线观看| 国产淫语在线视频| 亚洲成人免费电影在线观看| 99久久99久久久精品蜜桃| av天堂久久9| 丝袜人妻中文字幕| 久久人妻福利社区极品人妻图片| 亚洲av美国av| 波多野结衣av一区二区av| 午夜激情av网站| 国产精品一区二区免费欧美 | 日日夜夜操网爽| 国产精品免费大片| 欧美日韩视频精品一区| 午夜福利在线免费观看网站| 国产在线一区二区三区精| av免费在线观看网站| 中文字幕精品免费在线观看视频| 高清在线国产一区| 久久性视频一级片| 天天添夜夜摸| av视频免费观看在线观看| 婷婷成人精品国产| 精品少妇久久久久久888优播| 亚洲免费av在线视频| 欧美日韩成人在线一区二区| 国内毛片毛片毛片毛片毛片| 成人亚洲精品一区在线观看| 飞空精品影院首页| 一级毛片女人18水好多| 又大又爽又粗| 国产淫语在线视频| 一本大道久久a久久精品| 国产高清国产精品国产三级| 最新的欧美精品一区二区| 99精品久久久久人妻精品| 精品一品国产午夜福利视频| 久久久国产欧美日韩av| 欧美日韩亚洲高清精品| 女性被躁到高潮视频| 精品一区二区三区av网在线观看 | 人妻 亚洲 视频| 免费黄频网站在线观看国产| 91麻豆精品激情在线观看国产 | 男人添女人高潮全过程视频| 老汉色∧v一级毛片| 久久国产精品影院| 男人爽女人下面视频在线观看| 国产99久久九九免费精品| 免费久久久久久久精品成人欧美视频| 在线观看免费午夜福利视频| 肉色欧美久久久久久久蜜桃| 欧美黑人欧美精品刺激| 啦啦啦免费观看视频1| 丝瓜视频免费看黄片| 亚洲精品在线美女| 曰老女人黄片| 人人澡人人妻人| 可以免费在线观看a视频的电影网站| a在线观看视频网站| 国产成人精品久久二区二区91| 美女高潮喷水抽搐中文字幕| 精品视频人人做人人爽| 国产精品久久久人人做人人爽| 国产成+人综合+亚洲专区| 久久青草综合色| 日本猛色少妇xxxxx猛交久久| 国产成人免费观看mmmm| 波多野结衣一区麻豆| av网站免费在线观看视频| 90打野战视频偷拍视频| 亚洲国产日韩一区二区| 久久天堂一区二区三区四区| 国产在线观看jvid| 涩涩av久久男人的天堂| 亚洲精品国产av蜜桃| 亚洲精品成人av观看孕妇| 老司机影院成人| 无限看片的www在线观看| 国产成人免费无遮挡视频| 久久午夜综合久久蜜桃| www.精华液| 一本—道久久a久久精品蜜桃钙片| 69精品国产乱码久久久| 大香蕉久久成人网| 美女大奶头黄色视频| 日韩视频一区二区在线观看| 亚洲精品美女久久av网站| 国产一卡二卡三卡精品| 欧美97在线视频| 国产精品久久久av美女十八| 男人舔女人的私密视频| 自线自在国产av| 纯流量卡能插随身wifi吗| 一边摸一边做爽爽视频免费| 在线十欧美十亚洲十日本专区| 精品少妇内射三级| 久久青草综合色| 免费在线观看日本一区| 久久国产精品人妻蜜桃| 91大片在线观看| 国产成人啪精品午夜网站| 美女扒开内裤让男人捅视频| 熟女少妇亚洲综合色aaa.| 黑人猛操日本美女一级片| 青春草亚洲视频在线观看| 黑人欧美特级aaaaaa片| 中国国产av一级| 欧美精品av麻豆av| 欧美少妇被猛烈插入视频| 成人三级做爰电影| 亚洲综合色网址| 欧美另类亚洲清纯唯美| 91麻豆av在线| 精品欧美一区二区三区在线| 国产区一区二久久| 精品久久久久久电影网| 成人三级做爰电影| 国产精品欧美亚洲77777| 黑人猛操日本美女一级片| 一级片'在线观看视频| av又黄又爽大尺度在线免费看| av又黄又爽大尺度在线免费看| 极品人妻少妇av视频| 一本—道久久a久久精品蜜桃钙片| 久久久精品94久久精品| 久久精品国产a三级三级三级| 成人av一区二区三区在线看 | 亚洲九九香蕉| 少妇裸体淫交视频免费看高清 | 法律面前人人平等表现在哪些方面 | 精品福利永久在线观看| 欧美精品人与动牲交sv欧美| 亚洲黑人精品在线| 亚洲一码二码三码区别大吗| 中文字幕另类日韩欧美亚洲嫩草| 国产精品av久久久久免费| 久久精品国产亚洲av高清一级| 人成视频在线观看免费观看| 欧美精品人与动牲交sv欧美| 国产黄色免费在线视频| 国产黄色免费在线视频| 波多野结衣一区麻豆| 日韩有码中文字幕| 一区二区av电影网| 2018国产大陆天天弄谢| 久久99热这里只频精品6学生| 免费在线观看视频国产中文字幕亚洲 | 女人被躁到高潮嗷嗷叫费观| av在线老鸭窝| 亚洲精品一二三| 午夜福利在线免费观看网站| 国产亚洲精品久久久久5区| 久久久久久久久久久久大奶| 午夜福利在线观看吧| 免费不卡黄色视频| av一本久久久久| 50天的宝宝边吃奶边哭怎么回事| 又黄又粗又硬又大视频| 天堂俺去俺来也www色官网| 午夜福利视频在线观看免费| 国产一卡二卡三卡精品| 午夜福利在线免费观看网站| 色精品久久人妻99蜜桃| 别揉我奶头~嗯~啊~动态视频 | 999精品在线视频| 国产亚洲精品第一综合不卡| 两个人免费观看高清视频| 欧美黄色片欧美黄色片| 啦啦啦 在线观看视频| 亚洲性夜色夜夜综合| 男女之事视频高清在线观看| 中文欧美无线码| 日本猛色少妇xxxxx猛交久久| 免费一级毛片在线播放高清视频 | 电影成人av| 这个男人来自地球电影免费观看| 最新在线观看一区二区三区| 久久热在线av| 国产在视频线精品| 午夜激情av网站| 人人妻,人人澡人人爽秒播| 久久精品国产亚洲av香蕉五月 | 黄片播放在线免费| av电影中文网址| 老熟妇乱子伦视频在线观看 | 国产xxxxx性猛交| 欧美av亚洲av综合av国产av| 免费在线观看完整版高清| 成年人免费黄色播放视频| 男女之事视频高清在线观看| 国产av又大| 欧美日韩亚洲国产一区二区在线观看 | 中文字幕最新亚洲高清| 亚洲av片天天在线观看| 水蜜桃什么品种好| 午夜免费成人在线视频| 欧美日韩中文字幕国产精品一区二区三区 | 91av网站免费观看| 这个男人来自地球电影免费观看| 两人在一起打扑克的视频| 丰满迷人的少妇在线观看| 国产成+人综合+亚洲专区| 午夜精品国产一区二区电影| 亚洲第一av免费看| 亚洲中文av在线| 狠狠狠狠99中文字幕| 亚洲色图 男人天堂 中文字幕| 欧美另类亚洲清纯唯美| 中文字幕高清在线视频| 国产在视频线精品| 国产精品国产三级国产专区5o| 曰老女人黄片| 黄片播放在线免费| 99国产精品一区二区三区| 99久久人妻综合| 十八禁网站网址无遮挡| 狠狠狠狠99中文字幕| 在线观看免费午夜福利视频| 久久国产精品人妻蜜桃| 欧美精品亚洲一区二区| videos熟女内射| 久久精品aⅴ一区二区三区四区| 视频区欧美日本亚洲| 国产成人影院久久av| 欧美另类亚洲清纯唯美| 久久国产亚洲av麻豆专区| 国产成人欧美| 亚洲视频免费观看视频| 免费女性裸体啪啪无遮挡网站| 免费观看a级毛片全部| 一级毛片电影观看| 又黄又粗又硬又大视频| 纯流量卡能插随身wifi吗| 99精品欧美一区二区三区四区| 久久人妻福利社区极品人妻图片| 十八禁人妻一区二区| 国产亚洲欧美精品永久| 黑人操中国人逼视频| 热re99久久精品国产66热6| 日韩视频在线欧美| 国产精品.久久久| 男人操女人黄网站| 欧美另类一区| 人妻人人澡人人爽人人| 成年人午夜在线观看视频| 久久精品国产a三级三级三级| 精品乱码久久久久久99久播| 精品福利永久在线观看| 久久久久视频综合| av国产精品久久久久影院| 精品少妇一区二区三区视频日本电影| 十八禁高潮呻吟视频| 人成视频在线观看免费观看| 亚洲国产欧美在线一区| 精品久久久精品久久久| 日韩 欧美 亚洲 中文字幕| 天天添夜夜摸| 男女免费视频国产| 国产激情久久老熟女| 亚洲专区字幕在线| 一级黄色大片毛片| 美女高潮喷水抽搐中文字幕| 美女大奶头黄色视频| 欧美黄色淫秽网站| 在线观看免费高清a一片| 久久久久网色| 一个人免费看片子| 国产精品一区二区在线观看99| 免费人妻精品一区二区三区视频| 免费久久久久久久精品成人欧美视频| 丰满少妇做爰视频| 午夜免费成人在线视频| 少妇被粗大的猛进出69影院| 亚洲七黄色美女视频| 亚洲精品日韩在线中文字幕| 高清黄色对白视频在线免费看| 99久久国产精品久久久| 国产成人av激情在线播放| 欧美精品亚洲一区二区| 涩涩av久久男人的天堂| www.av在线官网国产| 超色免费av| √禁漫天堂资源中文www| 老司机深夜福利视频在线观看 | 90打野战视频偷拍视频| 亚洲天堂av无毛| www.熟女人妻精品国产| 免费在线观看视频国产中文字幕亚洲 | 韩国精品一区二区三区| 黄片小视频在线播放| 色精品久久人妻99蜜桃| 国产男人的电影天堂91| 亚洲国产欧美网| 12—13女人毛片做爰片一| 国产av一区二区精品久久| 香蕉丝袜av| 精品久久久久久电影网| 啦啦啦中文免费视频观看日本| 激情视频va一区二区三区| 1024香蕉在线观看| 如日韩欧美国产精品一区二区三区| 久久久久精品国产欧美久久久 | 欧美精品高潮呻吟av久久| 精品免费久久久久久久清纯 | 免费在线观看影片大全网站| www.av在线官网国产| 国产极品粉嫩免费观看在线| xxxhd国产人妻xxx| 又紧又爽又黄一区二区| 美女中出高潮动态图| 国产亚洲精品久久久久5区| 极品人妻少妇av视频| 国产成人精品久久二区二区免费| 国产深夜福利视频在线观看| 女性生殖器流出的白浆| 日本wwww免费看| 一本大道久久a久久精品| 天天影视国产精品| 日本a在线网址| 久久久国产成人免费| 大片免费播放器 马上看| 搡老岳熟女国产| 啪啪无遮挡十八禁网站| 夫妻午夜视频| 亚洲国产精品一区三区| 亚洲熟女毛片儿| 国产三级黄色录像| 少妇人妻久久综合中文| 又黄又粗又硬又大视频| 久久狼人影院| 欧美在线一区亚洲| 欧美中文综合在线视频| 老司机在亚洲福利影院| 久久久欧美国产精品| 男人操女人黄网站| 91精品伊人久久大香线蕉| 天天躁狠狠躁夜夜躁狠狠躁| 免费高清在线观看日韩| 免费不卡黄色视频| 亚洲精品av麻豆狂野| 激情视频va一区二区三区| 久久av网站| 国产成人影院久久av| 精品第一国产精品| 美女视频免费永久观看网站| 黄色视频不卡| 国产男人的电影天堂91| 又紧又爽又黄一区二区| 午夜福利免费观看在线| 男女高潮啪啪啪动态图| 成年av动漫网址| 人成视频在线观看免费观看| 久久国产亚洲av麻豆专区| 日韩精品免费视频一区二区三区| 亚洲精品自拍成人| 两个人看的免费小视频| 久久久久久免费高清国产稀缺| 国产三级黄色录像| 亚洲综合色网址| 激情视频va一区二区三区| 午夜福利在线免费观看网站| 亚洲综合色网址| 国产成人欧美| 69av精品久久久久久 | 国产区一区二久久| 欧美成人午夜精品| 亚洲av电影在线进入| 精品欧美一区二区三区在线| 久久久久网色| 男女床上黄色一级片免费看| 日韩中文字幕视频在线看片| 黑人巨大精品欧美一区二区mp4| 午夜福利,免费看| 女人精品久久久久毛片| 亚洲精品一卡2卡三卡4卡5卡 | 亚洲黑人精品在线| 50天的宝宝边吃奶边哭怎么回事| 男女无遮挡免费网站观看| 亚洲天堂av无毛| 国产精品免费视频内射| 亚洲av日韩精品久久久久久密| 欧美日韩一级在线毛片| 天堂8中文在线网| 午夜福利乱码中文字幕| 满18在线观看网站| 少妇人妻久久综合中文| 国产亚洲一区二区精品| 欧美xxⅹ黑人| 国产一区二区激情短视频 | 9191精品国产免费久久| 日本欧美视频一区| 午夜老司机福利片| 欧美精品亚洲一区二区| 欧美日韩亚洲综合一区二区三区_| 日日爽夜夜爽网站| 岛国毛片在线播放| 窝窝影院91人妻| 亚洲男人天堂网一区| 中文字幕最新亚洲高清| 精品一区二区三卡| 菩萨蛮人人尽说江南好唐韦庄| 老汉色∧v一级毛片| 成人黄色视频免费在线看| 亚洲中文字幕日韩| 中亚洲国语对白在线视频| 国产精品久久久久久精品电影小说| 国产精品av久久久久免费| av国产精品久久久久影院| 美女高潮喷水抽搐中文字幕| 久久影院123| 精品人妻在线不人妻| 中文字幕色久视频| 欧美+亚洲+日韩+国产| 午夜精品久久久久久毛片777| 久久国产精品影院| 日韩人妻精品一区2区三区| 国产精品久久久久久精品电影小说| 免费观看av网站的网址| 欧美国产精品va在线观看不卡| 51午夜福利影视在线观看| 女人爽到高潮嗷嗷叫在线视频| 亚洲人成77777在线视频| 99九九在线精品视频| 久久女婷五月综合色啪小说| 大片免费播放器 马上看| 大陆偷拍与自拍| 亚洲av成人一区二区三| 在线 av 中文字幕| 久久亚洲国产成人精品v| 久久热在线av| 午夜福利,免费看| 黑人欧美特级aaaaaa片| 99re6热这里在线精品视频| av天堂久久9| 久久毛片免费看一区二区三区| 正在播放国产对白刺激| 国产91精品成人一区二区三区 | 欧美久久黑人一区二区| 欧美黄色片欧美黄色片| 青春草亚洲视频在线观看| 亚洲视频免费观看视频| 中国美女看黄片| 97精品久久久久久久久久精品| 久久久久久久久久久久大奶| 搡老熟女国产l中国老女人| 天天添夜夜摸| 搡老熟女国产l中国老女人| 亚洲成av片中文字幕在线观看| 久久99热这里只频精品6学生| 欧美日本中文国产一区发布| 国产精品一区二区免费欧美 | 人人妻人人添人人爽欧美一区卜| 欧美黑人欧美精品刺激| 黄色a级毛片大全视频| 欧美黑人欧美精品刺激| 久久人人爽av亚洲精品天堂| 十八禁网站免费在线| 免费在线观看日本一区| 黄色视频不卡| 啦啦啦视频在线资源免费观看| videosex国产| 丝袜美足系列| 岛国在线观看网站| 国产男女超爽视频在线观看| 美国免费a级毛片| 狠狠狠狠99中文字幕| 欧美国产精品va在线观看不卡| 人成视频在线观看免费观看| 九色亚洲精品在线播放| 亚洲一码二码三码区别大吗| 亚洲午夜精品一区,二区,三区| 丝袜美腿诱惑在线| 人妻人人澡人人爽人人| 亚洲九九香蕉| 老司机深夜福利视频在线观看 | 国产免费一区二区三区四区乱码| 精品人妻熟女毛片av久久网站| 精品第一国产精品| 亚洲国产精品999| 青青草视频在线视频观看| 深夜精品福利| 亚洲av电影在线观看一区二区三区| 久久久欧美国产精品| 国产片内射在线| 亚洲精品一二三| 两个人看的免费小视频| 一二三四社区在线视频社区8| 50天的宝宝边吃奶边哭怎么回事| 欧美黑人欧美精品刺激| 精品国产乱子伦一区二区三区 | 一级毛片女人18水好多| 日韩,欧美,国产一区二区三区| 日日夜夜操网爽| 美女高潮到喷水免费观看| 真人做人爱边吃奶动态| 久久女婷五月综合色啪小说| 91九色精品人成在线观看| 精品国产乱码久久久久久男人| 无限看片的www在线观看| 亚洲国产精品一区二区三区在线| 色老头精品视频在线观看| 国产黄色免费在线视频| 97在线人人人人妻| 欧美久久黑人一区二区| 久久人妻熟女aⅴ| 国产精品久久久久久精品古装| 精品久久蜜臀av无| 亚洲国产日韩一区二区| 欧美精品啪啪一区二区三区 | 国产视频一区二区在线看| 日韩制服骚丝袜av| 亚洲视频免费观看视频| 国产亚洲精品一区二区www | 一级,二级,三级黄色视频| 嫩草影视91久久| 一级毛片电影观看| 99精国产麻豆久久婷婷| 丰满饥渴人妻一区二区三| 久久久久视频综合| 成年人免费黄色播放视频| 曰老女人黄片| 久久精品久久久久久噜噜老黄| 精品人妻在线不人妻| 99久久99久久久精品蜜桃| 国产成人影院久久av| 久久久国产欧美日韩av| 久久久久久久久免费视频了| 亚洲七黄色美女视频| 老熟妇仑乱视频hdxx| 国产精品欧美亚洲77777| 免费高清在线观看日韩| 一区二区三区激情视频| 可以免费在线观看a视频的电影网站| 十八禁网站免费在线| 国产亚洲精品一区二区www | 国产一级毛片在线| 后天国语完整版免费观看| 国产成人欧美| 精品熟女少妇八av免费久了| 婷婷色av中文字幕| 国产成人一区二区三区免费视频网站| 国产在线一区二区三区精| 最新在线观看一区二区三区| 丝袜喷水一区| 大片电影免费在线观看免费| 亚洲精品久久成人aⅴ小说| 男女高潮啪啪啪动态图| 亚洲男人天堂网一区| 法律面前人人平等表现在哪些方面 | 窝窝影院91人妻| 大香蕉久久网| 国产亚洲精品一区二区www | 久久精品人人爽人人爽视色| 午夜激情av网站| 亚洲av男天堂| 亚洲精品美女久久av网站| 国产精品99久久99久久久不卡| 99久久精品国产亚洲精品| 亚洲久久久国产精品| 9热在线视频观看99| 国产成人一区二区三区免费视频网站| 欧美老熟妇乱子伦牲交| 在线十欧美十亚洲十日本专区| 视频区图区小说| 免费在线观看完整版高清| a级毛片黄视频| 少妇人妻久久综合中文| 亚洲精品美女久久久久99蜜臀| 九色亚洲精品在线播放| 在线av久久热| 美女高潮到喷水免费观看| 日韩一区二区三区影片| 自拍欧美九色日韩亚洲蝌蚪91| 视频区欧美日本亚洲| 国产亚洲一区二区精品| 亚洲精品国产一区二区精华液| 亚洲性夜色夜夜综合| 黄色 视频免费看| 亚洲精品日韩在线中文字幕| 国产成人欧美| av一本久久久久| 国产免费福利视频在线观看| 国产深夜福利视频在线观看|