《航空學(xué)報(bào)》第39 卷2018 年英文主題索引

SUBJECTINDEXOFACTAAERONAUTICAETASTRONAUTICASINICA(2018)

Review

Review and recent advances in uncoupled algorithms for chemical non-equilibrium flows

LIU Jun, DONG Haibo, LIU Yu(021090)

Electroplasticity and electrically-assisted forming: A critical review

DING Junhao, LI Heng, BIAN Tianjun, MA Jun(021201)

Review of detumbling technologies for active removal of uncooperative targets

LU Yong, LIU Xiaoguang, ZHOU Yu, LIU Chongchao(021302)

Review of electric power system of distributed electric propulsion aircraft

KONG Xianghao, ZHANG Zhuoran, LU Jiawei, LI Jincai, YU Li(021651)

Progress and prospect of research on hole cold expansion technique

WANG Yanli,ZHU Youli,CAO Qiang,ZHANG Xiaohui(021336)

An overview of DPW Ⅳ-DPW Ⅵ numerical simulation technology

WANG Yuntao(021836)

Research progress in performance of adaptive rotor

HAN Dong, DONG Chen, WEI Wulei, SANG Yuwei(021603)

Review on support technology for mirror milling of aircraft skin

BAO Yan, DONG Zhigang, ZHU Xianglong, WANG Changrui, GUO Dongming, KANG Renke(021817)

An overview of HiLiftPW-1 to HiLiftPW-3 numerical simulation technologies

WANG Yuntao(021997)

Progress of research on cage stability of high-speed angular contact ball bearings

ZHANG Tao, CHEN Xiaoyang, GU Jiaming, LI Qingqing(022026)

Review on gas liquid shear coaxial injector in liquid rocket engine

KANG Zhongtao, LI Xiangdong, MAO Xiongbing, LI Qinglian(022221)

Progress in wire-driven parallel suspension technologies in wind tunnel tests

WANG Xiaoguang, LIN Qi(022064)

An overview of sensor management approaches for aerial target

YAN Tao, HAN Chongzhao, ZHANG Guanghua(022209)

Review of dissimilar friction stir welding between titanium and aluminum

HUANG Yongxian, LYU Zongliang, WAN Long, MENG Xiangchen, CAO Jian(022154)

Research progress in wave evolution and noise control for supersonic cavity flows

LIU Jun, CAI Jinsheng, YANG Dangguo, SHI Ao, LU Bo(022366)

Research status and development trend of big data in aviation system

KONG Xiangfen, CAI Junqing, ZHANG Lihan, TANG Jie, HOU Chenguang(022311)

FluidMechanicsandFlightMechanics

Mechanism of hypersonic transition induced by a roughness element and its application

ZHU Dehua, YUAN Xiangjiang, YANG Wubing(121349)

Unsteady aerodynamics modeling method using Volterra series based on multiwavelet

CHEN Senlin, GAO Zhenghong, RAO Dan(121379)

Gradient calculation method of unstructured mixed grids for improving drag prediction accuracy

ZHANG Peihong, ZHANG Yaobing, ZHOU Guiyu, CHEN Jiangtao, DENG Youqi(121415)

Jet impingement heat transfer performance in a double-wall cooling structure with film effusion holes and pin fins

RAO Yu, LIU Yuyang, WAN Chaoyi(121418)

Characteristics of heat transfer with dual piezoelectric fans in presence of cross flow

LI Xinjun, ZHANG Jingzhou, TAN Xiaoming(121424)

Unsteady aerodynamic characteristics of airfoil with local oscillation at low Reynolds number

LI Guanxiong, MA Dongli, YANG Muqing, GUO Yang(121427)

Extension of field synergy principle for convective heat transfer to high speed compressible boundary-layer flows

LIU Jingyuan(121429)

Effects of propeller slipstream on aerodynamic performance of diamond joined-wing configuration UAV

SUN Junlei, WANG Heping, ZHOU Zhou, LEI Shan(121431)

Problems in optimization design of HLFC sweep wing

YANG Yixiong, YANG Tihao, BAI Junqiang, SHI Yayun, LU Lei(121448)

Simulation and analysis for sonic boom on several benchmark cases

WANG Gang, MA Boping, LEI Zhijin, REN Jiong, YE Zhengyin(121458)

Analysis of mechanism of slat low frequency noise based on zonal DMD

WEI Jiayun, LI Weipeng, XU Siwei, ZHAO Keliang, SUN Yifeng(121469)

Dynamic characteristics of hammershock in S-shaped inlet

LIU Tingshen, FENG Lihao, WANG Jinjun(121339)

Experimental study of effects of fluidic obstacle parameters on deflagration-to-detonation transition

PENG Han, HUANG Yue, LIU Chen, XING Fei, LUAN Zhenye(121412)

Characteristics of unstable propagation of rotating detonation wave in plane-radial structure

XIA Zhenjuan, MA Hu, ZHUO Changfei, ZHOU Changsheng(121438)

Characteristic of airplane wheel water spray and its effect on water ingestion of engine inlet

YANG Chengfeng, GUO Zhaodian, DENG Wenjian(121453)

Effect of circumferential non-uniform tip clearance on performance of axial compressor

XIANG Honghui, GE Ning, GAO Jie, TANG Kai, YANG Rongfei(121491)

Application of slotted wall interference assessment and correction technique in transonic wind tunnel

LIU Guangyuan, WEI Zhi, PENG Xin, CHEN Dehua, JIA Zhiliang(121499)

Optimal control method for distributed morphing aircraft based on Karhunen-Loève expansion

GONG Chunlin, CHI Fenghua, GU Liangxian, FANG Hai(121518)

Uncertainty analysis of aerodynamic characteristics for cone-derived waverider configuration

SONG Fuqiang, YAN Chao, MA Baofeng, JU Shengjun(121519)

Quantitative analysis of micro porous structure of dynamic icing

LI Weibin, WEI Dong, DU Yanxia, YI Xian, YANG Xiaofeng(121536)

Flight test of flow separation control using plasma UAV

ZHANG Xin,HUANG Yong, YANG Pengyu, ZHANG Peng, HUANG Zhiyuan, WANG Dawei, LI Huaxing(121587)

Automatic transition prediction for wing-body configurations using dual eNmethod

ZHU Zhen, SONG Wenping, HAN Zhonghua(121707)

Rolling stability research of a near space hypersonic vehicle

LI Qian, ZHAO Zhongliang, WANG Xiaobing, LI Yuping, MA Shang(121553)

Flight dynamic modelling for coaxial rigid rotor helicopter using vortex-ring wake model

YUAN Ye, CHEN Renliang, LI Pan(121564)

A conservative interpolation method for overset mesh via super mesh

CUI Pengcheng, TANG Jing, LI Bin, MA Mingsheng, DENG Youqi(121569)

Numerical investigation of phase transition effects of droplet in icing wind tunnel

GUO Xiangdong, WANG Zixu, LI Ming, LIU Bei(121586)

Computational analysis of influence of differences in local catalytic properties on aero-thermal environment

DING Mingsong, DONG Weizhong, GAO Tiesuo, JIANG Tao, LIU Qingzong(121588)

An inlet flow model of swept blades for streamline curvature through-flow methods

CHANG Hao, JIN Donghai, GUI Xingmin(121616)

Aerodynamic parameter identification for aircraft wing icing usingH∞method

DING Di, CHE Jing, QIAN Weiqi, WANG Qing(121626)

Effects of stratification ratio on structure of separated stratified premixed swirl flame

LIU Zeyu, ZHANG Chi, HAN Xiao, LIN Yuzhen(121692)

Experimental of chevron nozzle jet impingement heat transfer on flat targeting surface

LYU Yuanwei, ZHANG Jingzhou, WANG Boyan, TAN Xiaoming(121694)

Evaporation characteristics of kerosene droplet under high-pressure conditions

LI Pengfei, LEI Fanpei, WANG Kai, ZHOU Lixin(121764)

Trajectory-orbit unified design for aerospace vehicles

FANG Qun, LIU Yisi, WANG Xuefeng(121398)

Handling qualities research of flying boom for air-to-air refueling based on mission-oriented method

CAO Huazi, GUO Youguang, WANG Lixin(121523)

High-order numerical simulation of CRM-WB wind tunnel model

WANG Yuntao, MENG Dehong, SUN Yan, LI Wei(121642)

Effect of thrust vector on dynamic aerodynamic characteristics of aircraft at high angle of attack

TANG Wei，HUANG Yong，F(xiàn)U Hao(121648)

A fast algorithm for simulating hydrocarbon fuel heat transfer with endothermic pyrolysis under supercritical pressures

HUANG Shizhang, RUAN Bo, GAO Xiaowei, LIU Huayu(121650)

Anti-icing property of NSDBD plasma actuator based on numerical simulation

JIA Yunze, SANG Weimin, CAI Yang(121652)

Experiment of convective heat transfer of pulsed jet impingement on a flat surface

LYU Yuanwei, ZHANG Jingzhou, TANG Chan, SHAN Yong(121695)

Effect of leading edge plate on high speed cavity noise control

ZHOU Fangqi, YANG Dangguo, WANG Xiansheng, LIU Jun, SHI Ao(121812)

Time spectral method for non-periodic fluid-structure coupling problems

YANG Tihao, BAI Junqiang, SHI Yayun, YANG Yixiong(121654)

Control mechanism and parameter analyses of aerodynamic characteristics of rotor via trailing-edge flap

MA Yiyang, ZHAO Qijun(121671)

Active flow control for enhancing vertical tail efficiency

ZHU Ziqiang, WANG Kai, HUANG Boen(121684)

Numerical simulation of supersonic viscous flow based on adaptive Cartesian grid

TANG Zhigong, CHEN Hao, BI Lin, YUAN Xianxu(121697)

Unsteady performance of a supersonic slender vehicle during spreading of the front wings

TANG Haimin, DU Sha, FU Jianming, LI Xinyi(121701)

An efficient surrogate-based global optimization for low sonic boom design

QIAO Jianling, HAN Zhonghua, SONG Wenping(121736)

Compressive sensing algorithm for sound source location of aircraft landing gear

NING Fangli, ZHANG Chao, PAN Feng, LIU Yong, WEI Juan(121810)

Direct numerical simulation of sheet breakup formed by two impinging jets with non-Newtonian shear thinning properties

ZHU Chengxiang, WU Meng, CHEN Rongqian, YOU Yancheng(121982)

Numerical study of aero-structural multidisciplinary lagged coupled adjoint system for aircraft

HUANG Jiangtao, ZHOU Zhu, LIU Gang, GAO Zhenghong, HUANG Yong, WANG Yuntao(121731)

Research on three dimensional hypersonic wing based on Busemann biplane

LIU Shuhan, ZHU Zhanxia(121405)

Application of DDES method to simulation of complicated rotor flowfield

DONG Jun, YE Liang(121689)

Design and analysis of hypersonic vehicle airfoil/wing at wide-range Mach numbers

SUN Xiangcheng, HAN Zhonghua, LIU Fei, SONG Ke, SONG Wenping(121737)

Influence of boattail shape on Magnus effects of a spinning rotating body

XIAO Zhongyun, MIAO Tao, CHEN Bo, JIANG Xiong(121744)

Parallel implicit hole-cutting method for unstructured overset grid

CHANG Xinghua, MA Rong, ZHANG Laiping(121780)

Influence of sensor surface temperature on heat flux measurement

ZENG Lei, QIU Bo, LI Yu, WANG Anling, GUI Yewei(121940)

Influence of pressure oscillation on self-pulsation of gas-liquid swirl coaxial injector

KANG Zhongtao, WANG Zhenguo, LI Qinglian, CHENG Peng(121988)

Theoretical analysis of research on aircraft spin characteristic in horizontal wind tunnel

GUO Linliang, ZHU Minghong, FU Hao, YANG Hongsen, ZHONG Chengwen(122030)

Efficient surrogate-based aerodynamic design optimization method with adaptive design space expansion

WANG Chao, GAO Zhenghong, ZHANG Wei, XIA Lu, HUANG Jiangtao(121745)

Lift response characteristics of a circulation control airfoil with internally blown flap

JIANG Yubiao, ZHANG Liu, HUANG Yong, GAO Lihua, CHEN Hong(121807)

Aerodynamic shape design integrating vortex and shock effects for width-velocity-range

LIU Chuanzhen, LIU Qiang, BAI Peng, CHEN Bingyan, ZHOU Weijiang(121824)

A reduction method for micro steady-state thrust based on dynamic compensation technique

ZHOU Weijing, HONG Yanji, YE Jifei, LI Nanlei, CHANG Hao(121885)

Study on air supply mode of aircraft cabin considering contaminant transmission laws

CHEN Xiyuan, WANG Zhenbin, MA Bowen, YANG Jianzhong(121994)

Far field simulation and applications of sonic boom based on augmented Burgers equation

ZHANG Yidian, HUANG Jiangtao, GAO Zhenghong(122039)

Modeling and analysis of distributed boundary layer ingesting propulsion system

DA Xingya, FAN Zhaolin, XIONG Neng, WU Junqiang, ZHAO Zhongliang(122048)

Control of compression ramp flow separation via vane vortex generator

HU Wanlin, YU Jian, LIU Hongkang, ZHAO Yuan, YAN Chao(122049)

Using active side-stick to prevent category II pilot-induced oscillations

XU Shuting, TAN Wenqian, SUN Liguo, QU Xiangju(121861)

Scheme selection for heating fatigue test-bed design of canopy based on CFD

WANG Xin, WANG Gang, ZHANG Xuefei, HE Qianqiang(121863)

High-robustness nonlinear-modification method for propeller blade element momentum theory

FAN Zhongyun, ZHOU Zhou, ZHU Xiaoping, WANG Rui, WANG Kelei(121869)

Mode conversion of electric tilt rotor aircraft based on corrected generalized corridor

LU Linhong, FU Rong, WANG Yong, ZENG Jianping(121900)

A new Blend low speed preconditioning method for numerical simulation of rotor interaction flowfield

CHEN Long, XIA Jian, TIAN Shuling(121903)

Multi-propeller/wing coupled aerodynamic design at low Reynolds numbers

WANG Kelei, ZHOU Zhou, ZHU Xiaoping, XU Xiaoping(121918)

Influence of co-flow jet key parameters on airfoil aerodynamic performance at low Reynolds number

XU Jianhua, LI Kai, SONG Wenping, YANG Xudong(122018)

Design of locally reacting liner based on transfer element method and experimental validation

LI Zhibin, WANG Xuli, WANG Xiaoyu, SUN Xiaofeng(122053)

Effect of slot casing treatment and it’s axial deflection angle on stability of transonic axial flow compressor

ZHANG Haoguang, TAN Feng, AN Kang, CHU Wuli, WU Yanhui(122101)

Experiment on flow control of airfoil dynamic stall using plasma actuator

LI Guoqiang, CHANG Zhiqiang, ZHANG Xin, YANG Pengyu, CHEN Li(122111)

Characteristic and application of high enthalpy air plasma flow field under atmospheric pressure

LIU Liping, WANG Yiguang, WANG Guolin, LUO Jie, MA Haojun(122132)

Multi-GPU parallel compressible flow solver and its performance analysis

LAI Jianqi, LI Hua, ZHANG Ran, CHANG Qing(121944)

Three-dimensional numerical simulation of icing using Myers model

LEI Menglong, CHANG Shinan, YANG Bo(121952)

Entropy correction method for high accuracy drag prediction with mixed grids

ZHANG Peihong, ZHANG Yaobing, ZHOU Guiyu, CHEN Jiangtao, DENG Youqi(122019)

Influence of self-strengthening effect of porous plate icing on water sublimators’ performance

LIU Chang, NING Xianwen, MIAO Jianyin, WANG Yuying, LYU Wei, WANG Lu(122046)

Test and analysis on aerodynamic performance of 1+1/2 super-transonic counter-rotating turbine

WU Zhongye, FANG Xiangjun, LIU Siyong, MA Guangjian(122155)

Test on self-excited oscillation characteristics of an open-end swirl injector with thick liquid film

XUE Shuaijie, LIU Hongjun, HONG Liu, CHEN Pengfei(122189)

Efficient prediction approach of transonic flutter based on high-order harmonic balance

LIU Nan, GUO Chengpeng, BAI Junqiang(121989)

An enhanced wall-boundary condition based on nonlinear coupled constitutive relations

JIANG Zhongzheng, ZHAO Wenwen, YUAN Zhenyu, CHEN Weifang(122057)

Integration design of inward-turning inlets based on forebody shock wave

QIAO Wenyou, YU Anyuan, YANG Dawei, LE Jialing(122078)

LU implicit methods for partitioned computation in rotating coordinate system

XIAO Zhongyun, LIU Gang, MOU Bin, JIANG Xiong(122079)

Analysis of low-speed height-velocity diagram of variable speed rotor helicopter in one engine inoperative situation

YAN Xufei, CHI Cheng, CHEN Renliang, LI Pan(122107)

Navier-Stokes/DSMC hybrid algorithm for hypersonic flows with chemical non-equilibrium

LI Zhonghua, DANG Leining, LI Zhihui(122229)

Neural network method for predicting density fluctuations in supersonic turbulence

WANG Zhengkui, JIN Xuhong, ZHU Zhibin, CHENG Xiaoli(122244)

A high-order large eddy simulation for shock and flame interaction

ZHANG Yang, MA Zhenhai, ZOU Jianfeng, ZHENG Yao, XIE Jiahua(122298)

Influence of pulse blowing on slotless flap airfoil aerodynamic characteristics

WANG Wanbo, JIANG Yubiao, HUANG Yong, YU Kunlong, ZHANG Xin(122118)

Numerical simulation of influence of RCS on control characteristics of aerodynamic surfaces

CHEN Qi, CHEN Jianqiang, ZHANG Yifeng, YUAN Xianxu(122141)

Wind-over-deck envelope calculation based on simulation of helicopter shipboard operations

JI Honglei, ZHAO Hui, CHEN Renliang, WU Wentao(122156)

Investigation on windage heating characteristics of labyrinth seals

SUN Dan, LU Jiang, LIU Yongquan, ZHAN Peng, XIN Qi(122348)

Effects of opening diameter on measurement of recessed pressure transducers

YAO Shiyong, MIN Changwan(122029)

Numerical simulation of flow field during landing for carrier-based aircraft near a moving base

LI Xu, ZHU Xiaoping, ZHOU Zhou, GUO Jiahao(122131)

Flight risk evaluation based on reachable set method at the phase of icing aircraft landing

WU Pengwei, LI Yinghui, ZHENG Wuji, ZHOU Chi, DONG Zehong(122139)

Flight safety envelope determination and maneuvering coping strategy for icing aircraft during landing phase

ZHOU Chi, LI Yinghui, ZHENG Wuji, WU Pengwei, DONG Zehong(122165)

A hybrid inverse/direct optimization design method for transonic laminar flow airfoil

CHEN Jing, SONG Wenping, ZHU Zhen, XU Zhenming, HAN Zhonghua(122219)

Influence factors on deformation and breakup of supercooled large droplets

LI Weihao, YI Xian, LI Weibin， WANG Yingyu(122243)

Numerical simulation of heat transfer of n-decane under supercritical pressure in horizontal rectangular cooling channels

ZHANG Zhuoyuan, HUANG Shizhang, GAO Xiaowei(122297)

Prediction of flight trajectory considering fluid-thermal-structural coupling effect

DAI Guangyue, ZENG Lei, LIU Shenshen, FENG Yi, TANG Wei, GUI Yewei(122346)

Unsteady aerodynamic characteristics of two-degree-of-freedom pitch/roll coupled motion for a typical vehicle model

ZHAO Zhongliang,

YANG Haiyong, MA Shang, JIANG Minghua, LIU Weiliang, LI Yuping, WANG Xiaobing, LI Qian(122375)

A matching method for variable mass flow ratio for through-flow nacelle

YAN Haijin, DU Xi(122379)

Efficient mesh deformation and flowfield interpolation method for unstructured mesh

GUO Zhongzhou, HE Zhiqiang, ZHAO Wenwen, CHEN Weifang(122411)

Test on hot jet noise of scaled engine nozzle

ZHANG Yingzhe, NI Daming, Incheol LEE, LIN Dakai, YANG Zhigang(122446)

Theoretical solutions and physical significances for minimum ratio of total pressure loss by oblique shock

SHI Aiming, Earl H DOWELL(122517)

Experimental on dynamic characteristics of an open-end swirl injector with thick liquid film

XUE Shuaijie, LIU Hongjun, HONG Liu, CHEN Pengfei(122534)

SolidMechanicsandVehicleConceptualDesign

Determination method for support plan for life-limited spares with normal distribution

SHAO Songshi, ZHANG Zhihua, LI Hua, LIU Renyang(221147)

Effect of crack parameters and stiffener layout on dynamic stress intensity factor of 3×3 grid stiffened panel at resonance

LIU Shuangyan, LI Yulong, XUE Pu, SHI Xiaopeng(221423)

Distributed vibration control for large satellite solar panels

WANG Enmei, WU Shu’nan, WANG Xiaoming, WU Zhigang(221479)

Model for determining maintenance intervals of aircraft structural with low utilization

JIA Baohui, LIU Yanbo, LU Xiang, TONG Shuai(221516)

Integrated layout and topology optimization design of multi-component structure system under harmonic force excitation

ZHU Jihong, ZHAO Hua, LIU Tao, ZHANG Weihong(221575)

Sorting method for design specifications of solar powered UAV based on FQFD

ZHOU Wei, LI Sai, WANG Xueren, XIE Fei(221299)

Parabolic model of equivalent crack approach for predicting fatigue life of pre-corroded aluminum alloys

DENG Jinghui, CHEN Pingjian, FU Yu(221421)

Experimental investigation on against penetration of metallic honeycomb sandwich plates under low-velocity impact

CHEN Shangjun,

QIN Qinghua, ZHANG Wei, XIA Yuanming, YU Xuehui,ZHANG Jianxun,WANG Binwen,WANG Tiejun(221483)

Selective maintenance optimization for multi-state systems subject to common cause failures

CAO Wenbin, JIA Xisheng, HU Qiwei(221556)

Global reliability sensitivity analysis using cross entropy method and space partition

ZHAO Xiang, LI Hongshuang(221570)

Panel flutter of variable stiffness composite laminates in supersonic flow

OUYANG Xiaosui, LIU Yi(221539)

Fastener connection flexibility of multi-bolted joint of composite laminate

HOU Chi, WAN Xiaopeng, HUANG Heyuan, NI Kaiqiang(221593)

A dynamic modeling method for resonator of hemispherical resonator gyro

XU Zeyuan, YI Guoxing, WEI Zhennan, ZHAO Wanliang(221624)

Efficient algorithm for estimating the derivative-based global sensitivity index

FENG Kaixuan, LYU Zhenzhou, JIANG Xian(221699)

Application of PLS-SEM in core parameter of armament cost estimation

ZHOU Zhou, GUO Jilian, ZHOU Yijiao, SHEN Anwei(221705)

Dynamic recognition method for reliability of general aviation fleet equipment

CHEN Yonggang, XIONG Shenghua, HE Qiang, HE Yuanhua(221706)

Criteria for evaluation of landing gear drop test based on energy method

DU Jinzhu,MENG Fanxing, LU Xuefeng(221375)

High temperature thermal insulation performance of light nanomaterials for aerospace craft

WU Dafang, REN Haoyuan, WANG Feng, WANG Huaitao(221636)

Reliability analysis of fuzzyk-out-of-nsystem considering maintenance influence and dynamic load distribution mechanism

LI Fang, HE Youchen, DI Peng, CHEN Tong, YIN Dongliang(221718)

Carrier-based aircraft equipment system-of-systems and index demonstration method

QU Yepin, JIN Huiming, HE Zhaoxiong(221675)

Impact response of ground ejection of front fuselage structure of carrier-based aircraft

HE Min, ZHU Xiaolong, LIU Xiaoming, LIU Fan, YAO Xiaohu(221711)

Double-deck bi-directional loading technology based on airliner cabin floor structure

LIU Wei, TENG Qing, LIU Bing(221712)

Compatibility test method in minimal samples situation with two samples

XU Yingqiang, CHEN Xianliang, CAO Dongbo(221936)

Dynamic behaviors of helicopter rotor in vertical landing

HU Guocai, WU Jing, LIU Xiangyi, LIU Shuyan(221355)

Active shape control of a reflector with PZT actuators assembled on ribs

SONG Xiangshuai, WANG Enmei, MU Ruinan, TAN Shujun, LAN Lan(221541)

Failure analysis of aeronautic composite structures incorporated with bridging model and FE model

LU Guanda, HUANG Zhengming(221646)

Design and parameter optimization of a new tunable dynamic vibration absorber

LI Qiang, DONG Guangxu, ZHANG Xinong, LUO Yajun, ZHANG Yahong, XIE Shilin(221721)

Damage tolerance of GLARE laminates subjected to high-velocity impact

CHEN Yong, LIAO Gaojian, REN Lihai, LIU Xi(221733)

Characteristics of bolt load distribution of stepped lap joints considering load transferred by bolt-head

LI Binbin, XU Zongzhen, LI Peng, ZHAO Yizhao, LIU Mabao(221816)

Experimental and analytical analyses of fatigue crack growth in sheets with multiple holes and cracks

LI Zhenghong, XU Wu, ZHANG Xiaojing, YU Yin(221867)

Fracture criterion and plane-strain fracture toughness of ductile materials

HAN Guangzhao, CAI Lixun, YAO Di, YU Simiao(221852)

Design and test of propulsion system for fuel cell powered UAVs

ZHANG Xiaohui, LIU Li, Dai Yueling, SHEN Hui(221874)

Fractional order control of vertical tail vibration based on first-order PPF

NIU Wenchao, LI Bin, GAO Zhenyu, WANG Wei(221884)

A high-frequency shock response analysis method based on energy finite element method and virtual mode synthesis and

simulation

CHEN Zhaolin, YANG Zhichun, WANG Yongyan, ZHANG Xinping(221893)

Multiaxial fatigue life prediction of an HPT disc based on critical plane-damage parameter

XU Shen, ZHU Shunpeng, HAO Yongzhen, LIAO Ding(221930)

Quantitative validation methods for accelerated degradation model and extrapolated results

ZHOU Yuan, WANG Haowei, GAI Bingliang(221950)

Accurate analytical weight function solutions for crack at edge of circular hole in infinite plate

ZHAO Xiaochen, WU Xueren, TONG Dihua, XU Wu, CHEN Bo, HU Benrun(221976)

Multi-phase material struclural topology optimization design based on feasible domain adjustment

YU Liaohong, RONG Jianhua, TANG Chengtie, LI Fangyi(222023)

A viscoelastic damage constitutive model for HTPB with kinked growth of microcracks

GU Zhixu, ZHENG Jian, PENG Wei, ZHI Jianzhuang(222051)

Effect of individual blade pitch control on flight performance of helicopters

DONG Chen, HAN Dong, YANG Kelong(222075)

Thermo-modal test and simulation of spindly vehicle in free boundary conditions

TANG Xiaofeng, CHANG Hongzhen, HE Zhenwei, SHI Xiaoming, TANG Guoan(222095)

Reliability analysis of fatigue life of aviation electrical connector contact parts

YANG Qiang, WEN Congcong, SUN Zhili, ZHANG Mengjun(222123)

Optimal regression model for aircraft structural load based on flight data

DUI Hongna, WANG Yongjun, DONG Jiang, LIU Xiaodong(222158)

A semi-analytical method for elastoplastic stress-strain analysis of thin sheet specimens

LIU Qin, CAI Lixun, CHEN Hui(222169)

Optimal design problem of system of systems of flight vehicle

ZHOU Jian, GONG Chunlin, SU Hua, ZHANG Xiaonan, LI Bo, GU Liangxian(222223)

A visco-hyperelastic constitutive model for EPDM soft PSD of dual-pulse motors

FAN Xinggui, XU Jinsheng, CHEN Xiong, DU Hongying, LI Yingkun, ZHANG Zhongshui(222299)

Energy dissipation of composite propellant under cyclic loading

TONG Xin, CHEN Xiong, XU Jinsheng, DU Hongying, ZHOU Changsheng(222322)

Optimal design for landing gear stiffness and damping based on helicopter ground resonance requirements

WU Jing, HU Guocai, LIU Quan, LIU Xiangyi(222027)

Finite element model of beem considering arbitrary deformation mode of cross-section

HE Huan, SONG Dapeng, ZHANG Chenkai, CHEN Guoping(222228)

Dynamic response analysis on carrier-based UAV considering catapult shuttle mass

FANG Xingbo, NIE Hong, ZHANG Zhao, WEI Xiaohui,ZHANG Ming(222237)

Hysteresis and creep nonlinearities modeling and adaptive hybrid compensation control of piezoelectric stack actuators

ZHAO Tian，YANG Zhichun，LIU Hao，Kassem MOHAMMED，WANG Wei(222308)

Scheduling algorithm for maintenance and service support of carrier-based aircraft on flight deck with different man-air-

craft matching patterns

SU Xichao, HAN Wei, ZHANG Yong, SONG Jingyu, ZHAO Zhenyu(222314)

Test technique for multi-load combined strength of hypersonic vehicle structure under complex loading environment

ZOU Xuefeng, GUO Dingwen, PAN Kai, QU Chao, TAO Yongqiang, ZHANG Xudong(222326)

Resonance in the orbital motion of solar power station due to gravitational orbit-attitude coupling

LIU Yuliang, WU Shu’nan, ZHANG Kaiming, WU Zhigang(222194)

ElectronicsandElectricalEngineeringandControl

Baseline determination for distributed InSAR satellite system using inter-agency comparison and fusion

YI Bin, QIN Xianping, GU Defeng, JU Bing(321187)

Radiation characteristics of pantograph-catenary arc and its influence on airport glide beacon

YANG Xiaojia, ZHU Feng, QIU Riqiang, LI Jikun(321252)

Path optimization algorithm for AFDX virtual link to balance the network risk

ZHAO Changxiao, HE Feng,YAN Fang, WANG Peng, XIONG Huagang(321435)

Development of terminal guidance law and PWPF modulator for near space interceptor based on finite time theory

DUAN Meijun, ZHOU Di, CHENG Dalin(321481)

Nonlinear alignment method for land SINS

WANG Zhiwei, WANG Fengjie, DI Changchun, SHI Zhiyong, YANG Gongliu(321554)

A decoupled direct position determination algorithm for multiple targets in mixed LOS/NLOS environments

YIN Jiexin , WANG Ding, WU Ying, LIU Ruirui(321338)

Current and tension control for deployment of a deorbiting electro-dynamic tether system

HUANG Jing, LIU Gang, ZHU Dongfang, SUN Lujun(321464)

An optimal radar resource scheduling algorithm based on integrated tracking and imaging of micro-motion targets

MENG Di, ZHANG Qun, LUO Ying, CHEN Yijun(321492)

Guidance law for cooperative tracking of a ground target based on leader-follower formation of UAVs

ZHANG Min, XIA Weizheng, HUANG Kun, CHEN Xin(321497)

High-precision space-variant motion compensation with multi-level processing for airborne SAR based on subswath

YANG Mingdong, YU Xiang, ZHU Daiyin(321557)

Time-triggered communication scheduling method for off-chip integrated interconnection

KONG Yunwen, LI Qiao, XIONG Huagang, CHENG Zijing(321590)

A method for measuring civil aviation passenger value by combining individual attributes and social relations

DING Jianli, LIU Xiaoqing, WANG Jialiang(321608)

Electromagnetic scattering analysis of stealth radome with inductively coupled plasma in interlayer chamber

CHEN Junlin, XU Haojun, WEI Xiaolong, CHEN Zenghui, LYU Hanyang(321472)

Radio frequency noise interference suppression based on estimation-feedback integration

WANG Guohong, SUN Dianxing, BAI Jie, ZHANG Xiangyu(321500)

Formation control for linear swarm systems with time-varying delays based on free-weighting matrices

SHI Xiaohang, ZHANG Qingjie, LYU Junwei(321628)

A lateral-directional control method combining rudder and propeller for full-wing solar-powered UAV

MA Zhenyu, ZHU Xiaoping, ZHOU Zhou(321633)

Air-platform multi-radar anti-bias tracks association algorithm

QI Lin, LIU Yu, REN Hualong, HE You(321691)

Design of receiving array of two-dimensional nested hybrid MIMO phased-array radar

LIU Shuaiqi, WANG Buhong, LI Xia, LIU Xinbo, CAO Shuai(321546)

Shaped-beam pattern synthesis based on quantization of element excitation amplitude

YANG Yin, SHENG Weixing, HAN Yubing, MA Xiaofeng(321653)

An optimal guidance method based on orbital element constraints

LI Chaobing，LYU Chunhong，SHANG Teng(321680)

Robust backstepping control of input-constrained hypersonic vehicle

LUO Changxin, ZHANG Dongyang, LEI Humin, BU Xiangwei, YE Jikun(321801)

Fault-tolerant battery power supply for aircraft and its active equalization management

WANG Youren, HUANG Xue, GENG Xing, XU Zhitong, CHEN Zewang(321722)

Statistical optimization feature matching algorithm based on epipolar geometry

ZHAO Chunhui, FAN Bin, TIAN Limin, HU Jinwen, PAN Quan(321727)

Analytical calculation method for single-phase AC resistance based on main feeder of aircraft

ZHANG Yaojia, WANG Li, WANG Xiaohui, LIU Wei, RUAN Ligang(321747)

Performance analysis of surveillance capacity of satellite-based ADS-B receiver

LIU Haitao, WANG Songlin, QIN Dingben, LI Dongxia(321866)

Smooth-switching active disturbance rejection control for oxygen regulator based on dead-zone compensation

DONG Fangyou, SUN Qinglin, ZHANG Xiaolei, JIANG Yuxin, SUN Mingwei, CHEN Zengqiang(321875)

Time-coordinated reentry guidance law for hypersonic vehicle

FANG Ke, ZHANG Qingzhen, NI Kun, CHENG Lin, HUANG Yuntao(321958)

Adaptive prescribed performance attitude tracking control for spacecraft via terminal sliding-mode technique

MA Guangfu , ZHU Qinghua, WANG Pengyu, GUO Yanning(321763)

Cognitive radar data association algorithm based on visual attention

WANG Shuliang, BI Daping, RUAN Huailin, ZHOU Yang(321828)

A new multivariate constrained algorithm for GNSS single-epoch single-frequency attitude determination based on attitude

domain

WU Hongtao, ZHAO Xiubin, PANG Chunlei, ZHANG Liang, FENG Bo(321850)

A fast SAR-GMTI focusing method based on time reversal and reduced-order Keystone

WAN Jun, ZHOU Yu, ZHANG Linrang, CHEN Zhanye(321862)

Trajectory tracking method for quadrotor UAV based on BSP-ANN

CHEN Zhiming, NIU Kang, LI Lei, WU Yunhua, HUA Bing(321924)

Reliability modeling and analysis of DIMA system based on jointk/n(G) model

YAN Fang, XING Peipei, ZHAO Changxiao, WANG Peng(321971)

A direction finding algorithm based on smooth reconstruction sparse Bayesian learning

CHEN Lu, BI Daping, PAN Jifei(322087)

DP-SA based airborne passive coherent location

GUO Yunfei, ZHANG Peinan, CAI Zhi(321835)

A method for centralized control network deployment of aeronautic swarm

LYU Na, LIU Chuang, CHEN Kefan, CAO Fangbo(321961)

ISAR micro-Doppler scatter-wave jamming method based on towed jammer

TANG Zhengzhao, DONG Chunxi, CHANG Xin, LIU Mingming, ZHAO Guoqing(322007)

Period estimation of aliasing pulse sequences based on sparse reconstruction

XU Chengwei, TAO Jianwu(322054)

Hybrid reliability optimization model based on new adaptive genetic algorithm

AN Hai, YAN Zhaoyi, SUN Peng, YIN Guiqiao(322084)

Rapid co-design method and key technologies for spacecraft cable net

KANG Yan, LIU Gang, ZHANG Bainan, WANG Qian, GU Wei, WANG Wei(322112)

An imaging algorithm for heterogeneous bistatic forward-looking SAR based on modified WLBF spectrum

LI Xiangping, CHEN Qi, ZHU Mingbo, ZOU Xiaohai, LU Zhiyi(321886)

A FFT frequency discriminator for improving the dynamic tracking performance of GNSS weak signal

QI Farui, ZHANG Tisheng, LI Zhuo, TANG Hailiang(321932)

Attitude control of near space kinetic kill vehicle based on neural network backtepping control

ZHANG Tao, LI Jiong, Wang Huaji, LEI Humin, YE Jikun(321953)

Algorithm for autofocusing of bistatic ISAR of space target based on sparse decomposition

HAN Ning, LI Baochen, WANG Libing, TONG Jun, GUO Baofeng(322037)

Design of trans-lunar trajectory based on ballistic escape and low-thrust capture

PENG Kun, HUANG Zhen, YANG Hong, ZHANG Bainan(322047)

ISAR autofocusing imaging with sparse apertures and time-varying bistatic angle

ZHU Xiaoxiu, HU Wenhua, MA Juntao, GUO Baofeng, XUE Dongfang(322059)

Algorithm for fighter zigzag maneuver target tracking with correlated noises at one epoch apart

LU Chunguang, ZHOU Zhongliang, LIU Hongqiang, KOU Tian, YANG Yuanzhi(322071)

Trajectory reshaping based impact angle and time control

ZHANG Youan, LIANG Yong, LIU Jingmao, SUN Yumei(322009)

Error analysis and formation design for double line-of-sight measuring relative navigation method

WANG Kai, XU Shijie, LI Kang, TANG Liang(322014)

Direct position determination algorithm based on modified cubature Kalman filter

LU Zhiyu, WANG Jianhui, BA Bin, WANG Daming(322031)

All-sky triangle algorithm for star pattern identification aided by star coordinates

ZONG Hua, LIU Yan, GAO Xiaoying, XIONG Pan(322045)

Clutter suppression method for rotor micro-motion target based on CEMD

XIA Saiqiang, XIANG Hu, CHEN Wenfeng, YANG Jun, CHEN Yichang(322082)

Adaptive trajectory tracking algorithm based on tracking model-predictive-static-programming

WANG Mengmeng, ZHANG Shuguang(322105)

Approach for automatic testing of stratospheric airship test based on behavior logic

ZHANG Yongdong, ZHAI Jiaqi, MENG Xiaojun, WANG Ziwei, ZHANG Yu, WANG Jianxun(322185)

Mission planning for agile satellite based on the mapping relationship between ground missions and spatial attitudes

ZHAO Lin, WANG Shuo, HAO Yong, LIU Yuan, CHAI Yi(322066)

Time-cooperative guidance law for multiple missiles with spatial cooperation

LYU Teng, LYU Yueyong, LI Chuanjiang, GUO Yanning(322115)

High power density optimal configuration for hybrid energy storage system based on equivalent time

CHENG Long, ZHANG Fanghua, XIE Min, WANG Yu, ZOU Hualei(322129)

Multi-level marker based autonomous landing system for UAVs

ZHANG Mi, ZHAO Yong, BU Shuhui, ZHANG Zhenwei, YANG Jun(322150)

Regional navigation algorithm assited by locations of multi UAVs

XU Jianxin, XIONG Zhi, CHEN Mingxing, LIU Jianye(322172)

Multi-target tracking algorithm based on amplitude and Doppler information

PENG Huafu, HUANG Gaoming, TIAN Wei, QIU Hao(322247)

Estimation-free and prescribed performance control of attitude takeover for non-cooperative spacecraft

YIN Zeyang, LUO Jianjun, WEI Caisheng, WANG Jiawen(322011)

Outside envelop grasping method and approaching trajectory optimization for tumbling malfunctional satellite capture

SUN Chong, YUAN Jianping, WAN Wenya, CUI Yao(322192)

Time and angle control guidance law based on optimal error dynamics

LI Bin, LIN Defu, HE Shaoming, BAI Bing(322215)

Power series solution for miss distance of higher-order linear proportional navigation guidance systems

HE Tailong, CHEN Wanchun, ZHOU Hao(322241)

Dynamic model identification of starting process of a turbo-shaft engine based on QPSO-ELM

WU Heng, LI Benwei, ZHANG Yun, YANG Xinyi(322251)

Airframe damage region dynamic division based on structural tensor characteristics

SHI Lizhong(322433)

Combat intention recognition for aerial targets based on deep neural network

ZHOU Wangwang, YAO Peiyang, ZHANG Jieyong, WANG Xun, WEI Shuai(322468)

UAV flight conflict resolution algorithm based on complex network

HUANG Yang, TANG Jun, LAO Songyang(322222)

Vulnerability of air traffic interdependent network

WANG Xinglong, PAN Weihuang, ZHAO Mo(322235)

Influence analysis of atmospheric refraction on location of television guiding missiles

LIU Yan, YUAN Yingtao, GUO Xiang, SUO Tao, LI Yulong, YU Qifeng(322248)

A task scheduling algorithm for multifunctional radar based on two-dimensional resource management

TIAN Taifang, ZHANG Qun, CHEN Yijun, MENG Di, HE Qifang(322313)

Adaptive tracking model for near space hypersonic jumping gliding target

LI Fan, XIONG Jiajun(322355)

In-flight TAEM guidance based on parameterized trajectory

FAN Pengfei, LIU Jiaolong, FAN Yonghua, YAN Jie(322382)

Strictly-regressive orbit maintenance control of near earth satellites

DU Yaoke, YANG Shengqing, WAN Bei, WANG Wenyan, CHEN Junli(322449)

Reentry trajectory planning and guidance method based on inverse drag acceleration

HUANG Hanbin, LIANG Luyang, YANG Ye(322558)

Cascading failure invulnerability and optimization strategy of airspace sector network

QI Yannan, GAO Jingdong(322579)

MaterialEngineeringandMechanicalManufacturing

Optimization design of passive elastic element parameter for underactuated gripper

CHU Zhongyi, LAI Mi, YAN Shaobo(421370)

Pneumatic rivet feeding technology for automatic aircraft panel drilling and riveting machine

JIANG Junxia, ZHANG Qixiang, ZHU Weidong(421380)

Cohesive zone model for prepreg tack based on probe test

SHU Zhan, PENG Xiao, LI Fafei, XU Qiang(421416)

Tension-tension fatigue performance of unidirectional out-of-autoclave composite manufactured by automated fiber placement

DONG Anqi, ZHAO Xinqing, ZHAO Yan(421422)

Effects of radiation coatings on directional solidification microstructure of hollow turbine blades

HUANG Fuxiang, MIAO Kai, LU Zhongliang, XU Wenliang, ZHU Weijun, LI Dichen(421462)

5-axis onsite inspection path generation and experimental verification of enclosed impeller

LI Wenlong, WANG Gang, YIN Zhouping(421474)

Crack monitoring based on high durability film sensor in coupled environment

CUI Ronghong, LIU Kai, HOU Bo, TAN Xiangfei, HE Yuting(421535)

Strain rate on material deformation in high speed metal cutting process

ZHANG Keguo, LIU Yong, WANG Yan’gang(421757)

Mismatched disturbance rejection of double gimbal servo system in variable speed control moment gyroscope using a novel

ESO method

LI Haitao, LIN Jie, HAN Bangcheng(421641)

Elastic fatigue enhancement mechanism of interference fit

ZHANG Qiliang, CAO Zengqiang, LI Hongmei， XIANG Cong， LIU Ping(421687)

Anisotropic yield and damage in warm forming of AZ31 magnesium alloy sheet: Implementation of constitutive model and

numerical analysis

ZHOU Xia, WEN Dong, SHEN Mengqi, SONG Shangyu(421665)

Catalytic performance of C/SiC composites in high enthalpy chemical non-equilibrium flow

LIU Liping, WANG Guolin, WANG Yiguang, ZHANG Jun, LUO Lei(421696)

Wind tunnel test methods for hot-wall microwave-transparency characteristics of antenna window materials

WANG Guolin, ZHANG Xiaochen, MA Haojun, LIU Liping, LUO Jie, ZHANG Jun(421748)

Automatic configuration and performance analysis of locators for reconfigurable assembly fixture system of pipeline com-

ponents

FAN Wei, ZHENG Lianyu, WANG Yahui, LIU Xinyu(421793)

Test and simulation of effects of multi-electrode coupling on atmospheric corrosion of metals

CHEN Yueliang, HUANG Hailiang, BIAN Guixue, ZHANG Yong, WANG Chenguang, WANG Andong(421751)

A trochoidal path planning method for rough machining of aeroengine casing parts

WANG Jing, LUO Ming, WU Baohai, ZHANG Dinghua(421814)

Quality control and mechanical properties of T700/PEEK thermoplastic prepreg for AFP

CHEN Haoran, LI Yong, HUAN Dajun, WANG Xin, CHU Qiyi(421842)

Bevel gear remanufacturing technology based on profile modification

CHEN Lishun， LI Silu， CHENG Li， YANG Wukui(421856)

Multi-objective optimization algorithm for geometric reconstruction of precision forged blade

FENG Yazhou, REN Junxue, LIANG Yongshou, LIU Mingshan(421844)

Simulation analysis of features of overhanging structure fabricated by selective laser melting

LIN Huijie, SHEN Lida, JIANG Jinhui, XIE Deqiao, LIANG Huixin, FAN Qinchun(421897)

Analysis and coordination of assembly deviation of multi plane-and-holes assembly based on orientation points group

CUI Zhizhuo, DU Fuzhou, XIONG Tao(421899)

Prediction model of machining errors based on precision and process parameters of machine tools

XIONG Qingchun, WANG Jiaxu, ZHOU Qinghua(421713)

Robust optimization of hydraulic piping system based on importance measure dimension-reduction

ZHANG Zheng, ZHOU Changcong, DAI Zhihao, REN Zhexian, YUE Zhufeng(421902)

Two step ageing(T78 temper) of an Al-Mg-Si-Cu alloy with small Cu addition

WANG Zhixiu, ZHU Fan, ZHENG Kai, LI Hai(421986)

A fault tolerant path planning method for space manipulator based on position and orientation reachable space

JIA Qingxuan, WANG Xuan, CHEN Gang, SUN Hanxu, GUO Wen(422000)

Energy consumption comparative analysis and research of flapping wing vehicle with elastic damping flapping mechanism

ZHANG Wei, LIU Guangze, ZHANG Boli(421966)

Ultrasonic-assisted in-situ placement of CF/PEEK composite and its mechanical properties

WANG Xin, LI Yong, HUAN Dajun, CHEN Haoran, ZHANG Xiangyang(422021)

Rolling bearing fault diagnosis based on IGA-ELM network

PI Jun, MA Sheng, HE Jiacheng, KONG Qingguo, LIN Jiaquan, LIU Guangcai(422025)

Control method of point-to-point singularity avoidance for free floating space robot

YANG Fan, ZHANG Guoliang, ZHANG Hexin, SONG Haitao(422040)

A quasi-static compression constitutive model for knitted-dapped metal rubber considering temperature effect

LI Tuo, BAI Hongbai, CAO Fengli(422062)

State expansion adaptive stabilization control of space manipulator with variable mass characteristics under on-orbit refuel-

ling task

QIN Li, YAN Lili, LIU Fucai, LIANG Bo(422070)

Dynamic analysis and optimization of ball-type rotary direct drive pressure servo valve

LU Liang, XIA Feiyan, YIN Yaobao, YUAN Jiayang, FANG Xiang(422143)

Stability analysis of aircraft skin mirror milling process

WANG Changrui, KANG Renke, BAO Yan, ZHU Xianglong, DONG Zhigang, GUO Dongming(422109)

Time-dependent reliability and sensitivity analysis for planar motion mechanisms with revolution joint clearances

LIU Fuchao, WEI Pengfei, ZHOU Changcong, ZHANG Zheng, YUE Zhufeng(422133)

Aluminum-based metallic glass coatings prepared with magnetic field assisted laser cladding

WANG Xiaoming, ZHU Sheng, YANG Baijun, ZHANG Yao, XU Anyang(422134)

Temperature prediction of tool/workpiece contact zone in titanium milling

LIU Julong, ZHANG Bi, BAI Qian, CHENG Bo(422128)

Finite element simulations of creep-fatigue behavior and life assessment of GH4169 alloy

YAO Ping, WANG Runzi, GUO Sujuan, ZHANG Xiancheng(422193)

Peel simulating and test verification of prepreg based on laying process

PENG Xiao, SHU Zhan, DU Tao, XU Qiang(422246)

Design of a particle damping absorber and experimental study on vibration damping of the pipe

YU Weigang,

CHEN Guo, LIU Binbin, CUN Wenyuan, ZHANG Maolin, ZHAO Zhengda, CHEN Xuemei, HOU Minli(422264)

An ultrasonic method of evaluation of TC4 primary α-phase grain size towards mapping monotonicity

DONG Jinlong, CHEN Hao, CHEN Xi, WU Guanhua, ZHOU Zhenggan, LI Changyong(422360)

Effect of assisted preheating temperature on weld formation of FSW of aluminum alloy thick plates

MAO Yuqing, ZHAO Yida, JIANG Zhouming, KE Liming(422554)