• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Type synthesis of 2-DoF rotational parallel mechanisms actuating the inter-satellite link antenna

    2016-11-23 01:57:44SongYiminQiYangDongGangSunTao
    CHINESE JOURNAL OF AERONAUTICS 2016年6期

    Song Yimin,Qi Yang,Dong Gang,Sun Tao

    Key Laboratory of Mechanism Theory and Equipment Design of Ministry of Education,Tianjin University,Tianjin 300350,China

    Type synthesis of 2-DoF rotational parallel mechanisms actuating the inter-satellite link antenna

    Song Yimin,Qi Yang,Dong Gang,Sun Tao*

    Key Laboratory of Mechanism Theory and Equipment Design of Ministry of Education,Tianjin University,Tianjin 300350,China

    This paper focuses on the type synthesis of two degree-of-freedom(2-DoF)rotational parallel mechanisms(RPMs)that would be applied as mechanisms actuating the inter-satellite link antenna.Based upon Lie group theory,two steps are necessary to synthesize 2-DoF RPMs except describing the continuous desired motions of the moving platform.They are respectively generation of required open-loop limbs between the fixed base and the moving platform and definition of assembly principles for these limbs.Firstly,all available displacement subgroups or submanifolds are obtained readily according to that the continuous motion of the moving platform is the intersection of those of all open-loop limbs.These subgroups or submanifolds are used to generate all the topology structures of limbs.By describing the characteristics of the displacement subgroups and submanifolds intuitively through employing simple geometrical symbols,their intersection and union operations can be carried out easily.Based on this,the assembly principles of two types are defined to synthesize all 2-DoF RPMs using obtained limbs.Finally,two novel categories of 2-DoF RPMs are provided by introducing a circular track and an articulated rotating platform,respectively.This work can lay the foundations for analysis and optimal design of 2-DoF RPMs that actuate the inter-satellite link antenna.

    1.Introduction

    With the rapid development of modern space technology,space flight vehicles including orbit satellites and manned spacecraft experience significant increments in both quantity and performance.This makes spacecraft tracking and surveying operations face great challenges,such as transmission velocity,coverage rate,and real-time capability,which are difficult to solve in terms of economics and politics.1,2To solve these problems,the tracking and data relay satellite(TDRS)has been invented and applied.3A TDRS can track nearly all flight vehicles in middle and low orbits and relay their data.This makes the performances of tracking and surveying operations improved dramatically.As a crucial component of a TDRS,the inter-satellite link antenna is required to track and capture inter-satellite links and then realize a higher rate of data transmission.The data transmission quality is directly related to the tracking accuracy and velocity of the intersatellite link antenna,which all depend on its actuated mechanism with two rotational degrees-of-freedom(DoFs).4

    In recent decades,the actuated mechanism of the intersatellite link antenna has drawn more and more attentions from both academia and industry.5,6A common way to design the actuated mechanism is to employ a serial structure consisting of two shafts connected perpendicularly,such as the famous COMETS actuated mechanism.5With the increments of the aperture and weight of the antenna,it is inevitable to design the actuated mechanism with a serial structure toward a larger size and a heavier weight,which cannot be allowed due to the limitation of the satellite space.In addition,the accuracy and velocity performances are the disadvantages of this actuated mechanism with a serial structure.6Thus,inventing an actuated mechanism with advantages of good accuracy,high velocity,and a large ratio of stiffness to size is the potential direction.Bearing these in mind,the actuated mechanism with a parallel structure is one of the best options.In this paper,the actuated mechanism with a parallel structure is referred to as the 2-DoF rotational parallel mechanism(RPM).Literatures7–9show that the 5R mechanism may be the simplest structure of the 2-DoF RPMs,in which R denotes the revolute joint and the axes of these revolute joints intersect at the same point.Gosselin,7Lum,8and Liu9investigated the kinematics of the 5R mechanism and settled its kinematic optimization subjects to the prescribed workspace and the isotropy. By introducing the parallelogram mechanism,Baumann et al.10invented a 2-DoF RPM called after PantoS-cope,which has been applied to a micro invasive surgery.Driven by the requirements for a bionic wrist,Ross-Hime Designs,Inc.proposed two novel 2-DoF RPMs named as super seeker gimbal and Omni wrist,respectively.11The Omni wrist has been used to assemble a spatial parallel mechanism by NASA.12Yu and Kong et al.13,14investigated a type of 2-DoF RPM employing a graphic approach,in which the twist and wrench were denoted by different lines,and then the constraint of the mechanism could be obtained after giving the relationship among lines.In addition,Carricato and Parenti-Castelli15analyzed a 2-DoF RPM and claimed that the mechanism has a compact structure and good robustness.Gogu16designed a 2-DoF RPM with isotropy based on the condition number of Jacobian matrix.Huang et al.17carried out the kinematics of a 2-DoF RPM with its structure Uamp;RRUamp;SPU,in which U,P,and S denote the universal,prismatic,and spherical joints,respectively.Using the algebraic properties of displacement subsets,Herve′18synthesized a kind of nonoverconstrained orientation mechanism with two actuated limbs.

    However,it is concluded from the aforementioned literature review that:(1)the number of topology structures of 2-DoF RPMs is less than that of other parallel mechanisms apparently,which would not meet increasing demands in the fields of aerospace,bionic,rehabilitation,etc.and(2)the assembly principles for limbs between a moving platform and a fixed base have not been defined in systematical,effective,and distinct manners.

    Since the introduction of Lie group theory by Herve′,19numerous literature studies20–24have demonstrated that Lie group theory is very effective for the type synthesis of parallel mechanisms.Lots of parallel mechanisms have been synthesized by means of this approach.For example,Li and Herve′20,21carried out the type synthesis of a class of parallel mechanism in terms of 3RM2TM,3RM1TM,and 2RM1TMtypes,in which RMand TMdenote rotation and translation.Meng et al.22employed the Lie algebra to calculate the intersection set of displacement subgroups and synthesized the type structures of limbs.Lee and Herve′23enumerated limb structures generating the product of two planar motions named G–G bond,and then synthesized a class of 3-DoF translational parallel mechanisms.Li and Herve′24analyzed the planarspherical bond and its generators,and then investigated the type synthesis of 1TM2RM-DoF parallel mechanisms without parasitic motions.

    Based upon Lie group theory,this paper focuses on the type synthesis of 2-DoF RPMs that would be applied as mechanisms actuating the inter-satellite link antenna.Having outlined in Section 1 the significance and the existing problems in the type synthesis of 2-DoF RPMs,the remainder of this paper is organized as follows.In Section 2,all available displacement subgroups and submanifolds are obtained,which are used to generatethetopologystructuresoftheopen-looplimbsbetween a fixed base and a moving platform.In Section 3,the characteristics of the displacement subgroups and submanifolds are described intuitively.Bearing in mind how to assemble the selected limbs to a 2-DoF RPM with a fixed base and a moving platform,theassemblyprinciplesoftwotypesaredefinedinSection 4 to synthesize all 2-DoF RPMs.In Sections 5 and 6,two novel categories of 2-DoF RPMs are provided by introducing a circular track and an articulated rotating platform,respectively.The conclusions are drawn in Section 7.

    2.Generation of open-loop limbs

    Based on Herve′’s work,19,20the displacement submanifold of the moving platform of a 2-DoF RPM can be described as

    where{MP}represents the displacement submanifold of the moving platform,P denotes the rotational center of the 2-DoF RPM,u and v represent the rotational axes of the 2-DoF RPM,and{R(P,u)}and{R(P,v)}denote the 1-D rotation about axis passing through point P and paralleling with unit vectors u and v,respectively.It is worth noticing that the 2-DoF RPMs synthesized in this paper are considered as realizing two rotations about the center of the moving platform.

    Since all the limbs of the 2-DoF RPM share the same moving platform,the displacement submanifold{MP}can also be described as

    where{Mi}represents the displacement subgroup or submanifold of the ith limb of the 2-DoF RPM,and can be further expressed as

    Table 1 Potential limb motions for 2-DoF RPMs.

    herein,{Ma,i}denotes the additional displacement subgroup or submanifold of the ith limb except the target submanifold,i.e.,{R(P,u)}{R(P,v)}in this paper.

    In order to guarantee that the synthesized mechanism is capable of two rotations,Eq.(3)must satisfy the following condition:

    where{E}denotes rigid connection without relative motions.

    Comparing Eq.(3)with the 6-D rigid body motion displacement subgroup{D},it’s informed that{Ma,i}could be the following displacement subgroup or the displacement submanifold constituted by the combination of the following displacement subgroups:{E},{R(P,g)},{T(m)},{T(Plu)},{T(Plv)},{T(Plc)},and{T},where g represents unit vector that is not correlated with unit vectors u and v,m represents unit vector of the arbitrary translational axis,Pluand Plvdenote the translational plane that is perpendicular to vectors u and v,respectively,Plcrepresents the translational plane that is not perpendicular to vectors u and v,{T(m)}describes 1-D translation parallel to unit vector m,{T(Pl)}denotes 2-D translations parallel to plane Pl,and{T}represents 3-D translationsin space.Consequently,thefollowingxRMyTM(x=2,3 and y=0,1,2,3,respectively)motions shown in Table 1 could be the potential limb motions for 2-DoF RPMs,where RMand TMrepresent the rotational and translational motions,respectively,and x and y denote the numbers of the rotational and translational motions,respectively.

    Through further analysis on those potential limb motions,it’s revealed that some xRMyTMmotions contain an inactive portion that does not contribute to the function of the whole unity.Namely,if the inactive portion being deleted from the xRMyTMmotions,then the remainders still own the capability to realize the desired 2-DoF rotational motion.

    Since the 1-D translation lacks of capability to influence the property of the rotational motion and the 2-D translations could not change the rotational axis that is not perpendicular to its translational plane,the 1-D translational subgroup{T(m)}of the 2RM1TMmotion{R(P,u)}{R(P,v)}{T(m)},the 2-D translational subgroup{T(Plc)}of the 2RM2TMmotion{R(P,u)}{R(P,v)}{T(Plc)},and the 1-D translational subgroup{T(m)}of the 3R1T motion{S(P)}{T(m)}are inactive portions.Besides,it should be pointed out that the desired motion in this paper is 2-DoF rotations about the center point of the moving platform,so the u axis of the 2RM2TMmotion{R(P,u)}{R(P,v)}{T(Plv)}must pass through the center point P,which leads to the function of the 2RM2TMmotion{R(P,u)}{R(P,v)}{T(Plv)}equaling to the 2RMmotion{R(P,u)}{R(P,v)}.In consequence,the portion{T(Plv)}is notactivein the2RM2TMmotion{R(P,u)}{R(P,v)}{T(Plv)}.The inactive portions in the limb motions not only have no practical functions in assembling the target mechanism,but also increase the manufacture and assembly difficulties.Therefore,these motions including inactive portions are eliminated from the available limb motions for the 2-DoF RPMs.

    In addition,the 6-D rigid body motion displacement subgroup{D}contains all the possible xRMyTMmotions,so the intersection of the displacement subgroup{D}and other xRMyTMmotions is still the xRMyTMmotion.Hence,in order to generate the desired 2-DoF rotational motion,the displacement subgroup{D}only can be utilized with the 2RMmotion{R(P,u)}{R(P,v)}.Furthermore,no assembly principle is needed for the displacement subgroup{D}.Therefore,the analysis of the displacement subgroup{D}is omitted in the following sections for simplicity.

    With the help of the following subgroup equivalent properties:{R(P,u)}{T(Plu)}={G(u)},{T}={T(Plu)}{T(Plv)},and{R(P,u)}{R(P,v)}{R(P,g)}={S(P)},the available limb motions discussed in this paper can be classified and transformed into the following forms:2RMsubmanifold{R(P,u)}{R(P,v)},3RMsubgroup{S(P)},2RM2TMsubmanifold{G(u)}{R(P,v)},2RM3TMsubmanifold{G(u)}{G(v)},and 3RM2TMsubmanifold{G(u)}{S(P)},where{G(u)}represents the 3-D planar gliding motions perpendicular to vector u and{S(P)}denotes the 3-D rotations about point P.

    In order to generate topological structures of limbs corresponding to available displacement subgroup and submanifolds for 2-DoF RPMs,three steps need to be carried out.20,21,23The primary step is to utilize the revolute joint(R joint),spherical joint(S joint),and planar joint to replace the corresponding displacement subgroups {R(P,u)},{S(P)},and{G(u)}.Based on this,the primary structures of open-loop limbs are derived.The second step is to expand the primary structures by introducing the equivalent generators of the R joint,S joint,and planar joint.The third step is to simplify the redundant generators.Based on the properties of the displacement subgroups and submanifolds,some generators of certain displacement submanifolds can be simplified.

    It is noted that the topology structures of limbs correspond to the displacement subgroups and submanifolds;however,the kind and number of the former are more than those of the latter.For brevity,the assembly principles would be defined for the displacement subgroups and submanifolds.

    3.Subgroup and submanifold characteristics

    Although the displacement subgroups or submanifolds can describe the continuous motions of the rigid body,the intersection operations of the displacement subgroups or submanifolds mainly depend on the mathematical inclusive concept.This method is inconvenient and inexplicit when being used to be applied to mechanisms with multiple limbs.For this reason,the authors of this paper25defined the subgroup characteristic using simple geometrical symbols and provided the intersection operation principles for spherical parallel mechanisms.For a reader’s convenience,the subgroup characteristic is recalled in this paper as shown in Fig.1 briefly,where Q is an arbitrary point within plane Pl.It should be noticed that the line in the characteristic symbol directly represents the rotational or translational axis,while the boundaries of the plane,cubic or sphere do not demonstrate the actual axes of the corresponding motion.More specifically,the translational plane denotes 2-D translations along any two axes parallel with the plane;the cubic means 3-D general translations along any three axes in space;and the sphere represents 3-D rotations about any three axes passing through the spherical center.

    As the extension of the displacement subgroup characteristic,the displacement submanifold characteristic may be described by the combination of the displacement subgroup characteristics.However,part of certain displacement subgroup characteristics may merge with others when multiple displacement subgroups coexist in one displacement submanifold.

    In order to describe the explicit characteristics of the feasible displacement submanifold for the 2-DoF RPM,the specific displacement submanifold satisfying the characteristic fusion conditions is equivalent to the product of displacement subgroups in a more concise and obvious manner,which is much more suitable for the synthesis of the 2-DoF RPM with multiple limbs.The equivalent results are expressed in Eqs.(5)and(6),and the characteristics of the available limbs for the 2-DoF RPM are shown in Fig.2.

    where F is a fixed point;M and N are different arbitrary points in space.

    4.Assembly principles

    As shown in Fig.2,the displacement subgroup or submanifolds of available limbs constituting a 2-DoF RPM are provided,from which at least two subgroups or submanifolds can be selected to form an intersection set in terms of 2-D rotational submanifold under prescribed assembly principles.The selected subgroups or submanifolds correspond to the limbs with different type structures,which can be employed to constitute a 2-DoF RPM with a fixed base and a moving platform.Herein,the assembly principles of the displacement subgroups or submanifolds are the key and challenging issue to synthesize 2-DoF RPMs.

    Fig.1 Displacement subgroup characteristics.

    Fig.2 Displacement subgroup or submanifolds of available limbs.

    As shown in Fig.3,a set of n displacement subgroups or submanifolds are selected from Fig.2 to be assembled toward a target submanifold,i.e.,a 2-D rotational submanifold.It is noted that the assemblage of the n displacement subgroups or submanifolds is carried out by unit of the intersection operation of two displacement subgroups or submanifolds successively.Bearing in mind the target submanifold,the assembly principles should be obeyed during the intersection operation of any two displacement subgroups or submanifolds.

    The results of the intersection operation of any two displacement subgroups or submanifolds selected from Fig.2 can be classified into two types.The first type is referred to as Type A,which means that the intersection set of any two displacement subgroups or submanifolds directly equals to a 2-DoF rotational submanifold.The corresponding assembly principles and intersection set characteristics are given in Table 2 and Fig.4,in which Piand Qidenote the points in the ith displacement subgroup or submanifold,uiand virepresent the rotational axes in the ith displacement submanifold,and Plimeans the translational plane in the ith displacement submanifold.The other type is referred to as Type B,which represents that the intersection set of two displacement subgroups or submanifolds is a high-dimensional displacement subgroup or submanifold including a 2-D rotational submanifold,and the assembly principles and intersection set characteristics of Type B are given in Table 3 and Fig.5.

    Fig. 3 Assemblage of n displacement subgroups or submanifolds.

    Table 2 Assembly principles of Type A.

    Fig.4 Intersection set characteristics of Type A.

    It should be noticed that the intersection sets of certain types given in Table 3,for instance,Type B.5.2,Type B.7.2,and Type B.8.5,contain displacement submanifolds which are not included in Fig.2,such as{R(P2,u1)}{R(P2,v1)}{T(n)},{S(P1)}{T(n)},and{R(P2,u1)}{R(P2,v1)}{T(Pl2)}.Seemingly,these displacement submanifolds can achieve 2-D rotational motion;nevertheless,the translational subgroups in each aforementioned displacement submanifold practically make no contribution to the feature of the rotational ingredient,which means that these translational subgroups are not indispensable for the intersection operation.Therefore,such submanifolds including the inactive translational subgroups have been culled in Fig.2.Actually,the aforementioned displacement submanifolds including the inactive translational subgroups can be generated by special limb structures,such as closed-loop limbs or parallelogram structures.Regarding the displacement submanifolds containing the inactive translational subgroups,the translational subgroups and rotational ingredient should be treated separately when assembling these displacement submanifolds including the inactive translational subgroups with other displacement subgroups or submanifolds.More specifically,the rotational ingredient should obey the assembly principles given in Tables 2 and 3 in this paper.The translation subgroups should be eliminated by the translational subgroup intersection operation,whose assembly principles have been given in the authors’previous work.25The intersection operation ofthedisplacementsubmanifolds including the inactive translational subgroups will be demonstrated in detail by examples.

    According to the assembly principles shown in Tables 2 and 3,the minimum limb number of synthesized 2-DoF RPMs complying the assembly principles of Type A is two,while it becomes three when applying the assembly principles of Type B.Furthermore,2-DoF RPMs with four,five,and more limbs can also be synthesized by reusing the Type A and Type B assembly principles.Moreover,the type structures of 2-DoF RPMs would be enriched with the help of limb structure equivalent replacement.By the aforementioned steps,all kinds of 2-DoF RPMs would be successfully synthesized.In order to illustrate the synthesis procedures,the type synthesis of 2-DoF RPMs with two and three limbs is selected as example to be carried out in details.

    According to Lie group theory,lots of different limb structures correspond to the same displacement subgroup or submanifold,for instance,RRR,RU,UR,and S are all limbstructures for the displacement subgroup{S(P)}.For simplicity,only R joint is chosen in this paper to construct limb structures.Corresponding to thedisplacementsubgroup or submanifolds of available limbs shown in Fig.2,RPuRPv,(RRR)PS, (RRR)uRPv, (RRR)u(RRR)v,and (RRR)u(RRR)PSare selected as exemplary limbs to represent 2RMsubmanifold{R(P,u)}{R(P,v)},3RMsubgroup{S(P)},2RM2TMsubmanifold{G(u)}{R(P,v)},2RM3TMsubmanifold{G(u)}{G(v)},

    and 3RM2TMsubmanifold{G(u)}{S(P)},respectively,where RPuindicates that the rotational axis of R joint parallels with unit vector u and passes through point P,(RRR)PSdenotes that all three R joints within the bracket pass through point P and their motions can equal to one spherical rotation,and (RRR)uimplies that the axes of three R joints within the bracket parallel to unit vector u and their motions equal to one planar motion.

    Table 3 Assembly principles of Type B.

    Fig.5 Intersection set characteristics of Type B.

    Therefore,applying the assembly principles of Type A to assemble the exemplary limb structures constructed before,the type synthesis of 2-DoF RPMs with two limbs can be accomplished and the typical type structures are shown in Table 4.

    Regarding 2-DoF RPMs with three limbs,there are two solutions.As shown in Fig.3,the intersection set of any two displacement subgroups or submanifolds could participate in subsequent intersection operation.Therefore,the first method to synthesize 2-DoF RPMs with three limbs is to utilize each limb combination of Type A as one unity and then rerun the assembly principles of Type A to find the suitable assembly principles for each limb combination to construct 2-DoF RPMs with three limbs.On the other hand,taking each intersection set of Type B as unity and determining the suitable assembly principles for applicable limb combinations is the other way to synthesize 2-DoF RPMs with three limbs.The typical type structures of 2-DoF RPMs with three limbs are shown in Table 5.

    It should be pointed out that the type synthesis of 2-DoF RPMs with two limbs and three limbs is taken as example to illustrate the type synthesis method.Through this method,2-DoF RPMs with more limbs can also be synthesized.However,for the sake of simplicity,the type structures of 2-DoF RPMs with more limbs are not exhibited in this paper.

    5.2-DoF RPM with circular track

    As mentioned above,the 2-DoF RPM will be synthesized by selecting the required limbs corresponding to the displacement subgroup or submanifolds in Fig.2,whose intersection operations have to obey the assembly principles provided in Section 4.Compared with the parallel mechanisms with more than two degrees offreedom,the 2-DoF RPM has more constraints,which leads to the difficulty and complexity in the design of type structures.As an alternative form of a revolute pair,a circular track is made of one circular path and its cor-responding movable slide.By using the movable slide to translate along the circular path,the circular track can achieve 1-D rotation about its center line without locating any physical joint along the rotational axis.25By providing a circular path along its circumference,the circular track transfers the rotation about its center line to a translation along its circular path,which relieves the assembly difficulty associated with the intersecting rotational axes.

    Table 4 Typical type structures of 2-DoF RPMs with two limbs.

    As shown in Fig.6,a 2-DoF RPM with a circular track is proposed.The type structure can be represented bydenotes the circular track whose center line parallels with the unit vector w1and passes through the circular track’s center point O.More specifically,the axes of two R joints and the distal axis of U joint are parallel to each other in the 1st,2nd,and 3rd limbs,respectively;the proximal axes of U joint in the 1st,2nd,and 3rd limbs are passing through the center point of U joint in the 4th limb;the center line of the circular track which is shared by the 1st and 3rd limbs coincides with the axis of R joint in the 4th limb and passes through the center point of U joint in the 4th limb,which can be designated as the center of the moving platform.

    It should be pointed out that,as shown in Fig.6,the circular track is capable of supporting the movable slides in the 1st and 3rd limbs to realize the translation along its circular path.Based on Lie group theory,this motion generated by the circular track should be described as{R(O,w1)},a rotational motion toward the center line of the circular track.However,as shown in Fig.6,the slide of the 2nd limb is fixed to the circular track.This deters the 2nd limb from achieving the aforementioned rotational motion.Therefore,the displacement submanifolds of the four limbs can be expressed as

    Bearing in mind the target submanifold,employing the assembly principle of Type B.5.2 in the intersection operation of{M1}and{M2}leads to

    The translational subgroup{T(w1)}in Eq.(11)is inactive for the following intersection operation with the 3rd and 4th displacement submanifolds and it should be treated separately from the rotational ingredient{R(P,u2)}{R(P,v2)}.

    Employing the assembly principle of Type A.5,the intersection operation of{M1}∩{M2}and{M3}can be derived as

    Table 5 Typical type structures of 2-DoF RPMs with three limbs.

    Similarly,employing the assembly principle of Type A.2 in the intersection operation of{M1}∩{M2}∩{M3}and{M4}yields

    Fig.6 Schematic diagram of a 2-DoF RPM with a circular track.

    As shown in Fig.6,it is informed from Eq.(13)that the RPM shown in Fig.6 is capable of two rotations described by a 2-D rotational submanifold,whose rotational axes are determined by the 2nd limb and rotational center coincides with the center of the moving platform.

    6.2-DoF RPM with articulated rotating platform

    In general,the moving platform of a parallel mechanism is always connected with a fixed base by open-loop limbs as one rigid body.In order to achieve required motion,such as rotations with large angles and gripping motion for irregular shapes,an articulated traveling platform26,27and articulated gripping platform28have been introduced to parallel mechanisms to replace the rigid moving platform.Inspired by this idea,an articulated rotating platform is defined in this paper as that the platform is composed by more than one rigid part articulated by one or more joints to generate relatively rotational motion between its subparts.Without loss of generality,the articulated rotating platform can be divided into two parts in terms of sub-part I and sub-part II.The function of sub-part I is to support and generate relative rotational motion for subpart II,which is utilized to connect with the end-effector to export the desired motion.By introducing the articulated rotating platform to the 2-DoF RPM,the assembly difficulty can be reduced significantly.

    As shown in Fig.7,a 2-DoF RPM with an articulated rotating platform is proposed.29The moving platform is composed of sub-part I and sub-part II,which are articulated by one revolute joint.Sub-part I and sub-part II are actuated by closed-loop limbs I and II,respectively.Closed-loop limbs I is constructed by the 1st and 3rd limbs,which are jointed to the 1st rod.Similarly,closed-loop limbs II is made up of the 2nd and 4th limbs,which are linked to the 2nd rod.As shown in Fig.7,the distal axes of U joints and revolute axes of R joints in closed-loop limbs I and closed-loop limbs II are parallel to each other,respectively;the proximal axes of U joints in each close-loop limbs coincide with each other and pass through the center of sub-part I,which can be designated as the center of the moving platform;the axes of the three R joints in each closed-loop limbs are arranged within one plane,respectively.

    It is worth noticing that sub-part I and sub-part II are articulated through one R joint,whose axis passes through the center point of the articulated rotating platform.This articulated structure enables the articulated rotating platform to generate one relative rotation{R(P,w)}between its two sub-parts.Due to the function of sub-part I,the relative rotation generated by the structure of the articulated platform should be ascribed to the motion of sub-part I.Furthermore,since the 1st actuated joint passes through the midpoint of the 1st rod and the center point of the articulated platform locates at the midpoint of rod B1B3,which is the opposite side of the 1st rod in the parallelogram A1B1B3A3,the parallelogram structure ensures that sub-part I has the rotational motion{R(P,u1)}.Similarly,sub-part II is also guaranteed to have rotational motion{R(P,u2)}.Therefore,combining the motions generated by the proximal axes of U joints and the motions produced by the parallelograms,the displacement submanifolds of each closed-loop limbs can be described as

    Fig.7 Schematic diagram of a 2-DoF RPM with an articulated rotating platform.

    where g1and g2are unit vectors within the parallelogram plane in closed-loop limbs I and closed-loop limbs II,respectively.The displacement subgroups{T(g1)}and{T(g2)}are generated by the parallelogram and inactive for the following intersection operation.Therefore,they should be treated separately from the rotational ingredient {S(P)} and{R(P,u2)}{R(P,v2)}.

    Bearing in mind the target submanifold,employing the assembly principle of Type A.2 in the intersection operation of{M1}and{M2}leads to

    As show in Fig.7,it is informed from Eq.(16)that the proposed RPM is capable of 2-D rotations,whose rotational axes are determined by closed-loop limbs II and rotational center coincides with the center of the moving platform.

    From what has been discussed in Sections 5 and 6,even though the mechanisms in both Figs.6 and 7 belong to the category of multiple closed-loop mechanisms,they still contain unique characteristics.Fig.6 shows a typical example of 2-DoF RPMs with a circular track,while Fig.7 displays a prototype of 2-DoF RPMs constructed of an articulated rotating platform.Therefore,the fundamental differences between these mechanisms come from the unique properties of these core components:the circular track and the articulated rotating platform.As discussed before,the circular track is able to provide a rotation without placing any physical joint along its rotational axis by transforming the rotational motion about its central axis to a translation along its circular path.This relieves the assembly difficulties regarding the intersectional axes.On the other hand,the articulated rotating platform reforms the traditional rigid moving platform into two subparts,which are rotationally connected by one R joint.Compared with a traditional rigid platform,the distinct construction of the articulated rotating platform supplies an extra rotation.From what has been discussed above,the core construction concepts of the mechanisms in Figs.6 and 7 are different.Besides,the layouts of limbs are different between these mechanisms.Even though both mechanisms in Figs.6 and 7 are composed offour limbs,the two opposite limbs of the mechanism in Fig.7 are demanded to form a parallelogram,which is the essential condition to ensure the 2-DoF rotation of the mechanism in Fig.7,while the mechanism in Fig.6 has a limb connected to the centers of the circular track and the moving platform.

    For the inter-satellite link antenna,the aforementioned different properties lead to differences in tracking velocity,working space,and stiffness performance for the mechanisms in Figs.6 and 7.Mainly based on type structure distinctions and not taking the optimal design into account,compared with the mechanism in Fig.7,the mechanism in Fig.6 has lower velocity and less working space because of the constriction of U joint located in the center of the moving platform.However,thanks to this U joint,the mechanism in Fig.6 should possess better stiffness performance than that in Fig.7.

    However different these mechanisms are,the mechanisms shown in Figs.6 and 7 still retain the merits of multiple closed-loop mechanisms.Compared with serial structure mechanisms,the geometrical errors of joints in limbs of multiple closed-loop mechanisms have a higher possibility to be compensated by the closed-loop structure,which makes the mechanisms in Figs.6 and 7 to obtain advantage in accuracy.Besides,the high acceleration effect and exerted payload on the platform are more likely to be rationally distributed to multiple closed-loop limbs.Consequently,the high velocity and stiffness performance of these mechanisms are better than those of serial structure mechanisms.Based on these outstanding properties generated from the type structure,the mechanisms shown in Figs.6 and 7 are suitable for the inter-satellite link antenna.

    7.Conclusions

    Based upon Lie group theory,this paper focuses on the type synthesis of 2-DoF RPMs that would be applied as mechanisms actuating the inter-satellite link antenna.The following conclusions are drawn.

    (1)According to that the continuous motion of the moving platform is the intersection of those of all open-loop limbs,all available displacement subgroup and submanifolds are obtained readily.These subgroup and submanifolds are used to generate topology structures of limbs.

    (2)By describing the characteristics of the displacement subgroup and submanifolds intuitively through employing simple geometrical symbols,their intersection and union operations can be carried out easily.

    (3)The assembly principles of two types are defined,which are used as the rules to assemble the selected limbs to a 2-DoF RPM with a fixed base and a moving platform.

    (4)Two novel categories of 2-DoF RPMs are provided by introducing a circular track and an articulated rotating platform,respectively,which demonstrate the employment of the assembly principles in the topology synthesis of 2-DoF RPMs.

    Acknowledgments

    This research work was supported by the National Natural Science Foundation of China(No.51475321)and Tianjin Research Program of Application Foundation and Advanced Technology(No.15JCZDJC38900 and No.16JCYBJC19300).

    Appendix A.Supplementary material

    Supplementary data associated with this article can be found,in the online version,at http://dx.doi.org/10.1016/j.cja.2016.05.005.

    1.Toyoshima M.Trends in satellite communications and the role of optical free-space communications.J Opt Netw 2005;4(6):300–11.

    2.Mulla A,Baviskar J,Baviskar A,Bhovad A.GPS assisted standard positioning service for navigation and tracking:reviewamp;implementation.International conference on pervasive computing;2015 January 8–10.Pune(India),Piscataway(NJ):IEEE Press;2015.p.1–6.

    3.Hogie K,Criscuolo E,Dissanayake A,Flanders B,Safavi H,Lubelczyk J.TDRSS demand access system augmentation.IEEE aerospace conference,2015 March 7–14.Big Sky(MT,United States),Piscataway(NJ):IEEE Press;2015.p.1–10.

    4.Vimal K,Prince S.System analysis for optimizing various parameters to mitigate the effects of satellite vibration on intersatellite optical wireless communication.IEEE international conference on signal processing,informatics,communication and energy systems;2015 February 19–21.Kozhikode(India),Piscataway(NJ):IEEE Press;2015.p.1–4.

    5.Takeuchi M,Isobe S,Hamamototoi N,Ohmori S,Yamamoto M.Experimental advanced mobile satellite communications system in MM-wave and Ka-band using Japan’s COMETS.Global telecommunications conference;1992 December 6–9.Orlando(FL,United States),Piscataway(NJ):IEEE Press;1992.p.443–6.

    6.Knogl JS,Henkel P,Gunther C.Precise positioning of a geostationary data relay using LEO satellites.ESA workshop on satellite navigation technologies and European workshop on GNSS signals and signal processing;2011 September 14–16.ESTEC(Noordwijk,Netherlands),Piscataway(NJ):IEEE Press;2011.p.325–8.

    7.Gosselin CM,Caron F.Two degree-of-freedom spherical orienting device.United States patent US 19995966991.October 19,1999.

    8.Lum MJH,Rosen J,Sinanan MN,Hannaford B.Optimization of a spherical mechanism for a minimally invasive surgical robot:theoretical and experimental approaches.IEEE Trans Bio-Med Eng 2006;53(7):1440–5.

    9.Wu C,Liu XJ,Wang LP,Wang JS.Optimal design of spherical 5R parallel mechanisms considering the motion/force transmissibility.ASME J Mech Des 2010;132(3):031002.

    10.Baumann R,Maeder W,Glauser D,Clavel R.The PantoScope:a spherical remote-center-of-motion parallel mechanism for force reflection.IEEE international conference on robotics and automation;1997 April 20–25.Albuquerque(NM,United States),Piscataway(NJ):IEEE Press;1997.p.718–23.

    11.Baumann R,Maeder W,Glauser D,Clavel R.The PantoScope:a spherical remote-center-of-motion parallel mechanism for force reflection.IEEE international conference on robotics and automation;1997 April 20–25.Albuquerque(NM,United States),Piscataway(NJ):IEEE Press;1997.p.718–23.

    12.Williams RLII,Dana BP.Spherically actuated platform mechanism.J Robotic Syst 2001;18(3):147–57.

    13.Wu K,Yu JJ,Zong GH,Kong XW.A family of rotational parallel mechanisms with equal-diameter spherical pure rotation.ASME J Mech Robot 2014;6(1):011008.

    14.Yu JJ,Dong X,Pei X,Kong XW.Mobility and singularity analysis of a class of two degrees offreedom rotational parallel mechanisms using a visual graphic approach.ASME J Mech Robot 2012;4(4):041006.

    15.Carricato M,Parenti-Castelli V.A novel fully decoupled twodegrees-of-freedom parallel wrist.Int J Robot Res 2004;23(6):661–7.

    16.Gogu G.Fully-isotropic over-constrained parallel wrists with two degrees offreedom.IEEE international conference on robotics and automation;2005 April 18–22.Barcelona(Spain),Piscataway(NJ):IEEE Press;2005.p.4014–9.

    17.Zeng DX,Hou YL,Huang Z,Lu WJ.Type synthesis and characteristic analysis of a family of 2-DOF rotational decoupled parallel mechanisms.Chin J Mech Eng-En 2009;22(6):833–40.

    18.Herve′JM.Uncoupled actuation of pan-tilt wrists.IEEE Trans Robot 2006;22(1):56–64.

    19.Herve′JM.The Lie group of rigid body displacements,a fundamental tool for mechanism design.Mech Mach Theory 1999;34(5):719–30.

    20.Li QC,Huang Z,Herve′JM.Displacement manifold method for type synthesis of lower-mobility parallel mechanisms.Sci China Ser E 2004;47(6):641–50.

    21.Li QC,Huang Z,Herve′JM.Type synthesis of 3R2T 5-DOF parallel mechanisms using the Lie group of displacements.IEEE Trans Robotic Autom 2004;20(2):173–80.

    22.Meng J,Liu GF,Li ZX.A geometric theory for analysis and synthesis of sub-6 DoF parallel mechanisms.IEEE Trans Robot 2007;23(4):625–49.

    23.Lee CC,Herve′JM.Translational parallel mechanisms with doubly planar limbs.Mech Mach Theory 2006;41(4):433–55.

    24.Li QC,Herve′JM.1T2R parallel mechanisms without parasitic motion.IEEE Trans Robot 2010;26(3):401–10.

    25.Qi Y,Sun T,Song YM,Jin Y.Topology synthesis of three-legged spherical parallel mechanisms employing Lie group theory.P I Mech Eng C-J Mec 2015;229(10):1873–86.

    26.Song YM,Gao H,Sun T,Dong G,Lian BB,Qi Y.Kinematic analysis and optimal design of a novel 1T3R parallel manipulator with an articulated travelling plate.Robot Cim-Int Manuf 2014;30(5):508–16.

    27.Sun T,Song YM,Gao H,Qi Y.Topology synthesis of a 1-translational and 3-rotational parallel manipulator with an articulated traveling plate.ASME J Mech Robot 2015;7(3):031015.

    28.Song YM,Qi Y,Sun T.Conceptual design and kinematic analysis of a novel parallel manipulator with an articulated gripping platform.The 3rd IEEE/IFToMM international conference on reconfigurable mechanisms and robots;2015 July 20–22,Beijing,China.2015.p.433–44.

    29.Song YM,Dong G,Sun T,Zhao XM,Wang PF.A 2-DoF rotational parallel mechanism.China patent ZL 2012105131575.December 4,2012[Chinese].

    Song Yimin is a professor and Ph.D.supervisor in the School of Mechanical Engineering at Tianjin University.His main research interests are robotics and mechanisms,mechanical dynamics,and mechanical transmission.

    Sun Tao is an associate professor in the School of Mechanical Engineering at Tianjin University.His main research interests include robotics and mechanisms.

    25 November 2015;revised 6 January 2016;accepted 17 April 2016

    Available online 22 October 2016

    Articulated rotating platform;

    Assembly principle;

    Circular track;

    Lie group theory;

    Rotational parallel mechanism;

    Tracking and data relay satellite;

    Type synthesis

    ?2016 Chinese Society of Aeronautics and Astronautics.Production and hosting by Elsevier Ltd.This is anopenaccessarticleundertheCCBY-NC-NDlicense(http://creativecommons.org/licenses/by-nc-nd/4.0/).

    *Corresponding author.Tel.:+86 22 27406327.

    E-mail address:stao@tju.edu.cn(T.Sun).

    Peer review under responsibility of Editorial Committee of CJA.

    Production and hosting by Elsevier

    http://dx.doi.org/10.1016/j.cja.2016.05.005

    1000-9361?2016 Chinese Society of Aeronautics and Astronautics.Production and hosting by Elsevier Ltd.

    This is an open access article under the CC BY-NC-ND license(http://creativecommons.org/licenses/by-nc-nd/4.0/).

    两个人的视频大全免费| 国语对白做爰xxxⅹ性视频网站| 亚州av有码| 多毛熟女@视频| 亚洲精品国产色婷婷电影| 亚洲情色 制服丝袜| 欧美bdsm另类| 国产黄色免费在线视频| 国产精品一区二区在线观看99| 成人亚洲精品一区在线观看| 亚洲精华国产精华液的使用体验| 丝瓜视频免费看黄片| 久热久热在线精品观看| 啦啦啦啦在线视频资源| 免费看av在线观看网站| 国产一级毛片在线| 建设人人有责人人尽责人人享有的| 国产精品国产三级国产专区5o| 久久精品夜色国产| 97精品久久久久久久久久精品| 狂野欧美激情性bbbbbb| 久久99热6这里只有精品| 久久久久精品性色| 精品一品国产午夜福利视频| 久久热精品热| 成人影院久久| 性色av一级| 赤兔流量卡办理| .国产精品久久| 五月伊人婷婷丁香| 91精品国产国语对白视频| 一边摸一边做爽爽视频免费| 日日摸夜夜添夜夜添av毛片| 街头女战士在线观看网站| 精品久久久久久久久av| 51国产日韩欧美| 免费少妇av软件| 精品国产露脸久久av麻豆| 国产极品粉嫩免费观看在线 | 丝瓜视频免费看黄片| 国产欧美亚洲国产| 少妇人妻 视频| 国产黄片视频在线免费观看| 亚洲精品国产av蜜桃| 久久久久久久久久成人| 人人妻人人澡人人看| 天美传媒精品一区二区| 黄色视频在线播放观看不卡| 少妇 在线观看| 女性被躁到高潮视频| 国产精品久久久久成人av| 日韩成人av中文字幕在线观看| 久久久精品94久久精品| 日韩精品有码人妻一区| 欧美精品人与动牲交sv欧美| 大话2 男鬼变身卡| 汤姆久久久久久久影院中文字幕| 久久99精品国语久久久| 五月伊人婷婷丁香| 蜜臀久久99精品久久宅男| 最近的中文字幕免费完整| 国产精品国产三级国产专区5o| 欧美日韩av久久| 丝袜美足系列| 国产成人精品婷婷| 久久久久久伊人网av| 最近最新中文字幕免费大全7| 亚洲欧洲精品一区二区精品久久久 | 一级黄片播放器| 国产精品蜜桃在线观看| 高清在线视频一区二区三区| 精品一品国产午夜福利视频| 国产成人freesex在线| 精品熟女少妇av免费看| 狂野欧美激情性xxxx在线观看| 韩国av在线不卡| 另类亚洲欧美激情| 亚洲精品日韩av片在线观看| 国产免费一区二区三区四区乱码| 新久久久久国产一级毛片| 亚洲成人av在线免费| 日本vs欧美在线观看视频| 美女内射精品一级片tv| 欧美一级a爱片免费观看看| 国产免费一级a男人的天堂| 中文精品一卡2卡3卡4更新| 亚洲av免费高清在线观看| 一级爰片在线观看| 亚洲精品自拍成人| 亚洲情色 制服丝袜| 欧美亚洲日本最大视频资源| 99视频精品全部免费 在线| 男男h啪啪无遮挡| 国产一级毛片在线| 夜夜看夜夜爽夜夜摸| 国产一区亚洲一区在线观看| 在线免费观看不下载黄p国产| 精品视频人人做人人爽| 新久久久久国产一级毛片| av免费在线看不卡| 成人国产av品久久久| 中文字幕精品免费在线观看视频 | 中文字幕最新亚洲高清| 狂野欧美激情性xxxx在线观看| 最近中文字幕高清免费大全6| 丰满少妇做爰视频| 大香蕉97超碰在线| 一区二区三区乱码不卡18| 能在线免费看毛片的网站| 免费大片18禁| 五月天丁香电影| 久久精品国产鲁丝片午夜精品| 91精品三级在线观看| 人妻夜夜爽99麻豆av| 七月丁香在线播放| 最近中文字幕高清免费大全6| 久久精品夜色国产| 亚洲精品乱码久久久v下载方式| 涩涩av久久男人的天堂| 一个人免费看片子| 涩涩av久久男人的天堂| 尾随美女入室| 夜夜看夜夜爽夜夜摸| 人人妻人人澡人人看| 18禁在线播放成人免费| 五月天丁香电影| 高清在线视频一区二区三区| 高清视频免费观看一区二区| 男女免费视频国产| 欧美bdsm另类| 99九九线精品视频在线观看视频| 亚洲av免费高清在线观看| 精品亚洲成a人片在线观看| 国产精品.久久久| 亚洲国产精品专区欧美| 老司机影院成人| 人妻 亚洲 视频| 国产极品天堂在线| 日韩成人av中文字幕在线观看| 国产深夜福利视频在线观看| 久久免费观看电影| 一区二区三区四区激情视频| 在线观看一区二区三区激情| 国产精品偷伦视频观看了| av国产精品久久久久影院| 内地一区二区视频在线| 制服丝袜香蕉在线| 国产高清有码在线观看视频| 亚洲欧美色中文字幕在线| 久久久久久久久久久久大奶| 日日爽夜夜爽网站| 青春草视频在线免费观看| 亚洲精品自拍成人| 一二三四中文在线观看免费高清| 国产日韩欧美在线精品| 黄片无遮挡物在线观看| 春色校园在线视频观看| 十八禁网站网址无遮挡| av又黄又爽大尺度在线免费看| 最近2019中文字幕mv第一页| 久久久久久久久久人人人人人人| 午夜激情久久久久久久| 青春草国产在线视频| 伦精品一区二区三区| 人人妻人人澡人人看| 亚洲精品日本国产第一区| 国产精品人妻久久久久久| 99热国产这里只有精品6| 热99国产精品久久久久久7| 中文字幕久久专区| 国产精品一区二区在线观看99| 最近中文字幕2019免费版| 国产精品 国内视频| 天天躁夜夜躁狠狠久久av| 免费观看av网站的网址| 18+在线观看网站| 欧美老熟妇乱子伦牲交| 国产高清不卡午夜福利| 母亲3免费完整高清在线观看 | 国产欧美另类精品又又久久亚洲欧美| 国产片内射在线| 午夜福利视频精品| 国产精品一区www在线观看| 热re99久久精品国产66热6| 美女中出高潮动态图| 午夜福利在线观看免费完整高清在| 日韩三级伦理在线观看| 亚洲婷婷狠狠爱综合网| 亚洲精品一区蜜桃| 日韩一区二区视频免费看| 国产成人freesex在线| 欧美精品一区二区大全| 国产成人91sexporn| av一本久久久久| 欧美性感艳星| 欧美精品亚洲一区二区| 亚洲国产欧美日韩在线播放| 久久久国产欧美日韩av| 久久鲁丝午夜福利片| 只有这里有精品99| 国产精品欧美亚洲77777| 成年人午夜在线观看视频| 国产日韩欧美在线精品| 制服丝袜香蕉在线| 亚州av有码| av不卡在线播放| 乱人伦中国视频| 久久午夜福利片| 国产乱来视频区| 少妇精品久久久久久久| 人体艺术视频欧美日本| 国产精品一国产av| 人人妻人人添人人爽欧美一区卜| 日本黄色片子视频| 欧美激情国产日韩精品一区| 亚洲色图 男人天堂 中文字幕 | 日韩大片免费观看网站| 老司机亚洲免费影院| 亚洲人成网站在线观看播放| 久久久午夜欧美精品| 亚洲情色 制服丝袜| 女的被弄到高潮叫床怎么办| 亚洲经典国产精华液单| 亚洲av男天堂| 国产片特级美女逼逼视频| 亚洲人成网站在线观看播放| 黄片无遮挡物在线观看| 黄色毛片三级朝国网站| 亚洲av综合色区一区| 欧美老熟妇乱子伦牲交| 免费观看a级毛片全部| 亚洲色图综合在线观看| 成人二区视频| www.av在线官网国产| 亚洲av成人精品一二三区| 卡戴珊不雅视频在线播放| 中文字幕亚洲精品专区| 日韩,欧美,国产一区二区三区| 观看av在线不卡| 青青草视频在线视频观看| 亚洲精品中文字幕在线视频| av有码第一页| 日韩不卡一区二区三区视频在线| 少妇猛男粗大的猛烈进出视频| 内地一区二区视频在线| 插逼视频在线观看| 久久久久久久久大av| 欧美xxxx性猛交bbbb| 最近中文字幕2019免费版| 青青草视频在线视频观看| 日韩视频在线欧美| 搡女人真爽免费视频火全软件| 欧美日韩av久久| 国产男女超爽视频在线观看| 久久青草综合色| 大又大粗又爽又黄少妇毛片口| 成人黄色视频免费在线看| 人妻少妇偷人精品九色| 全区人妻精品视频| 美女福利国产在线| 亚洲国产日韩一区二区| 欧美性感艳星| 国产精品人妻久久久久久| 各种免费的搞黄视频| 美女视频免费永久观看网站| 男女边摸边吃奶| 一区二区三区免费毛片| 久久av网站| 18禁裸乳无遮挡动漫免费视频| 美女视频免费永久观看网站| 免费人妻精品一区二区三区视频| 下体分泌物呈黄色| 三级国产精品欧美在线观看| 高清欧美精品videossex| 精品人妻熟女毛片av久久网站| 国产精品欧美亚洲77777| 久久久国产欧美日韩av| 国产成人91sexporn| 久热久热在线精品观看| 亚洲av国产av综合av卡| 曰老女人黄片| 免费观看av网站的网址| 亚洲婷婷狠狠爱综合网| videosex国产| 少妇猛男粗大的猛烈进出视频| 亚洲无线观看免费| 久久人人爽人人爽人人片va| tube8黄色片| 亚洲美女视频黄频| 自线自在国产av| 欧美精品一区二区免费开放| 久久久久国产精品人妻一区二区| 99视频精品全部免费 在线| 亚洲精品av麻豆狂野| 欧美变态另类bdsm刘玥| 大码成人一级视频| 国产精品麻豆人妻色哟哟久久| 最黄视频免费看| 一级黄片播放器| 亚洲精品aⅴ在线观看| 亚洲综合精品二区| 国产av码专区亚洲av| 国产黄片视频在线免费观看| 国产探花极品一区二区| 黑人欧美特级aaaaaa片| 亚洲精品久久成人aⅴ小说 | 特大巨黑吊av在线直播| 国产午夜精品久久久久久一区二区三区| 国产精品99久久99久久久不卡 | 建设人人有责人人尽责人人享有的| 国产女主播在线喷水免费视频网站| 精品卡一卡二卡四卡免费| 欧美日本中文国产一区发布| 天美传媒精品一区二区| 高清视频免费观看一区二区| 国产综合精华液| av视频免费观看在线观看| 又粗又硬又长又爽又黄的视频| 亚洲精品一区蜜桃| 美女国产视频在线观看| 青春草国产在线视频| 精品酒店卫生间| 久久久亚洲精品成人影院| 国产精品免费大片| 熟女人妻精品中文字幕| 一级毛片aaaaaa免费看小| 三级国产精品欧美在线观看| 大片电影免费在线观看免费| 色婷婷久久久亚洲欧美| 亚洲精品一区蜜桃| 国产精品久久久久久久电影| 亚洲欧洲国产日韩| 毛片一级片免费看久久久久| 国产爽快片一区二区三区| 日韩,欧美,国产一区二区三区| av福利片在线| 亚洲情色 制服丝袜| 久久99热6这里只有精品| 亚洲经典国产精华液单| 色哟哟·www| 亚洲精品乱码久久久v下载方式| 91久久精品电影网| 国产av国产精品国产| av在线老鸭窝| 天天操日日干夜夜撸| 一区二区av电影网| 99久国产av精品国产电影| 赤兔流量卡办理| 十分钟在线观看高清视频www| 国产亚洲一区二区精品| 久久久精品免费免费高清| 亚洲欧美一区二区三区黑人 | 成人二区视频| 天堂中文最新版在线下载| 日本与韩国留学比较| 日本爱情动作片www.在线观看| 久久婷婷青草| 国产成人免费观看mmmm| 晚上一个人看的免费电影| 免费大片黄手机在线观看| 啦啦啦在线观看免费高清www| 欧美xxxx性猛交bbbb| 久久久久国产网址| 99热国产这里只有精品6| 久久97久久精品| 97超碰精品成人国产| 亚洲一级一片aⅴ在线观看| 晚上一个人看的免费电影| 我的老师免费观看完整版| 日日撸夜夜添| 国产精品一区www在线观看| 国产日韩欧美在线精品| 日本-黄色视频高清免费观看| 91在线精品国自产拍蜜月| 久久久国产欧美日韩av| 如日韩欧美国产精品一区二区三区 | 色婷婷av一区二区三区视频| 丰满饥渴人妻一区二区三| 国产欧美亚洲国产| 欧美少妇被猛烈插入视频| 国产色爽女视频免费观看| 2022亚洲国产成人精品| 免费av中文字幕在线| 亚洲精品成人av观看孕妇| 免费高清在线观看日韩| 久久综合国产亚洲精品| 国产乱人偷精品视频| 大香蕉久久成人网| 夜夜骑夜夜射夜夜干| 黄色一级大片看看| 男女国产视频网站| 久久久国产欧美日韩av| 日本色播在线视频| 久久精品夜色国产| 精品熟女少妇av免费看| 啦啦啦视频在线资源免费观看| 18+在线观看网站| 爱豆传媒免费全集在线观看| 亚洲av不卡在线观看| 男女啪啪激烈高潮av片| 中文字幕精品免费在线观看视频 | 天堂中文最新版在线下载| 高清av免费在线| 两个人免费观看高清视频| 成人影院久久| 91精品一卡2卡3卡4卡| 国产精品三级大全| 人人妻人人爽人人添夜夜欢视频| 成人影院久久| 久久久久国产网址| 插阴视频在线观看视频| 91久久精品电影网| 韩国高清视频一区二区三区| 26uuu在线亚洲综合色| 国产精品久久久久成人av| 老司机亚洲免费影院| 一边亲一边摸免费视频| 狠狠精品人妻久久久久久综合| 国产精品麻豆人妻色哟哟久久| 亚洲天堂av无毛| 欧美日韩国产mv在线观看视频| 久热这里只有精品99| 看非洲黑人一级黄片| 另类精品久久| a级毛片在线看网站| 老司机亚洲免费影院| 国产男女超爽视频在线观看| 综合色丁香网| 欧美变态另类bdsm刘玥| 大片电影免费在线观看免费| 日韩视频在线欧美| 中文精品一卡2卡3卡4更新| 丝袜喷水一区| 少妇丰满av| 国产精品一二三区在线看| 大陆偷拍与自拍| 成年人免费黄色播放视频| 我的女老师完整版在线观看| 亚洲国产精品成人久久小说| 日韩一区二区视频免费看| 搡女人真爽免费视频火全软件| 最近2019中文字幕mv第一页| 看十八女毛片水多多多| 五月玫瑰六月丁香| 亚洲国产精品成人久久小说| 考比视频在线观看| 日本wwww免费看| 欧美3d第一页| 精品人妻偷拍中文字幕| 午夜免费观看性视频| 国产精品女同一区二区软件| 免费看光身美女| 热re99久久国产66热| 九九在线视频观看精品| 中文乱码字字幕精品一区二区三区| 国产成人freesex在线| 亚洲高清免费不卡视频| 国产免费一级a男人的天堂| 九色亚洲精品在线播放| 男人操女人黄网站| 中文字幕人妻熟人妻熟丝袜美| 欧美精品国产亚洲| 亚洲无线观看免费| 美女内射精品一级片tv| av网站免费在线观看视频| 亚洲欧美日韩另类电影网站| 交换朋友夫妻互换小说| 国精品久久久久久国模美| 人妻制服诱惑在线中文字幕| 视频中文字幕在线观看| 久久人人爽人人爽人人片va| 国产精品久久久久久久久免| 免费观看a级毛片全部| 国产亚洲一区二区精品| 两个人的视频大全免费| 少妇 在线观看| 99re6热这里在线精品视频| 成人漫画全彩无遮挡| 久久久欧美国产精品| 美女大奶头黄色视频| 午夜福利影视在线免费观看| 99国产精品免费福利视频| 中国国产av一级| 青春草视频在线免费观看| av福利片在线| 久久久a久久爽久久v久久| 国产极品粉嫩免费观看在线 | 亚洲成色77777| 少妇人妻久久综合中文| 在线亚洲精品国产二区图片欧美 | 99热这里只有是精品在线观看| 黑丝袜美女国产一区| 久久久久人妻精品一区果冻| 久久国产精品男人的天堂亚洲 | 我的老师免费观看完整版| 桃花免费在线播放| 欧美 日韩 精品 国产| 亚洲精品乱码久久久久久按摩| 国语对白做爰xxxⅹ性视频网站| 91精品一卡2卡3卡4卡| 少妇人妻久久综合中文| 国产 精品1| 国产av精品麻豆| 亚洲成人手机| 免费看光身美女| 亚洲精品国产色婷婷电影| 高清在线视频一区二区三区| 中文欧美无线码| 人妻人人澡人人爽人人| 精品人妻熟女毛片av久久网站| 成人漫画全彩无遮挡| 精品一区二区三卡| 五月玫瑰六月丁香| 亚洲图色成人| 在线看a的网站| 成年人午夜在线观看视频| 欧美精品人与动牲交sv欧美| 亚洲人与动物交配视频| 亚洲精品自拍成人| 麻豆精品久久久久久蜜桃| 中文欧美无线码| 蜜桃国产av成人99| 精品久久久久久久久亚洲| 亚洲成人一二三区av| 哪个播放器可以免费观看大片| 亚洲精品456在线播放app| 亚洲天堂av无毛| 九九爱精品视频在线观看| 亚洲国产精品专区欧美| 日本91视频免费播放| 十分钟在线观看高清视频www| 99久久人妻综合| 国产极品粉嫩免费观看在线 | 十八禁网站网址无遮挡| 国精品久久久久久国模美| 日韩成人伦理影院| 在线观看国产h片| 精品久久久噜噜| 亚洲美女视频黄频| 一个人免费看片子| 亚洲国产欧美在线一区| 日韩电影二区| 日韩中文字幕视频在线看片| 99久久人妻综合| 一本色道久久久久久精品综合| 高清在线视频一区二区三区| 日本vs欧美在线观看视频| av在线app专区| 日韩制服骚丝袜av| 亚洲精品一区蜜桃| av免费在线看不卡| 久久久久久久亚洲中文字幕| 啦啦啦在线观看免费高清www| av专区在线播放| 在线观看国产h片| 免费看光身美女| 大片免费播放器 马上看| 一级毛片黄色毛片免费观看视频| 五月天丁香电影| 亚洲精品日韩在线中文字幕| 国产在线一区二区三区精| 制服人妻中文乱码| 女人久久www免费人成看片| 曰老女人黄片| 亚洲av成人精品一二三区| 国产成人午夜福利电影在线观看| 一区二区三区乱码不卡18| 欧美日韩成人在线一区二区| 乱码一卡2卡4卡精品| 久久影院123| 亚洲经典国产精华液单| 青春草国产在线视频| 精品久久蜜臀av无| 国产在线免费精品| 在线免费观看不下载黄p国产| 亚洲av成人精品一二三区| 在线播放无遮挡| 国产精品久久久久成人av| 观看av在线不卡| 两个人免费观看高清视频| 能在线免费看毛片的网站| 国产精品无大码| 免费人成在线观看视频色| 91在线精品国自产拍蜜月| a级毛片在线看网站| 丁香六月天网| 日韩强制内射视频| 午夜福利在线观看免费完整高清在| 欧美日韩亚洲高清精品| a级毛片免费高清观看在线播放| 免费av不卡在线播放| 欧美3d第一页| 精品久久久久久久久av| 精品国产一区二区三区久久久樱花| 成人二区视频| 夫妻午夜视频| 夜夜看夜夜爽夜夜摸| 在线亚洲精品国产二区图片欧美 | 亚洲精华国产精华液的使用体验| 欧美 亚洲 国产 日韩一| 在线观看免费日韩欧美大片 | 日本av手机在线免费观看| 国产永久视频网站| 精品亚洲成国产av| 欧美性感艳星| 欧美精品一区二区大全| 中文字幕人妻熟人妻熟丝袜美| 久久99热这里只频精品6学生| 欧美精品一区二区大全| 涩涩av久久男人的天堂| 啦啦啦中文免费视频观看日本| 母亲3免费完整高清在线观看 | 亚洲av免费高清在线观看| 一区二区av电影网| 欧美人与善性xxx|