2022年2期
Journal of Magnesium and Alloys
Review
Full Length Article
- Influence of extrusion conditions on microstructure and mechanical properties of Mg-2Gd-0.3Zr magnesium alloy
- Study of galvanic corrosion and mechanical joint properties of AZ31B and carbon-fiber-reinforce polymer joined by friction self-piercing riveting?
- The effects of orientation control via tension-compression on microstructural evolution and mechanical behavior of AZ31 Mg alloy sheet
- PEO processing of AZ91Nd/Al2O3 MMC-the role of alumina fiber
- Influence of nano-diamond content on the microstructure,mechanical and thermal properties of the ZK60 composites
- Experimental measurement on the phase equilibria of the Mg-Ag-Cu ternary system at 350 and 400°C
- Mechanical and corrosion properties of graphene nanoplatelet-reinforced Mg-Zr and Mg-Zr-Zn matrix nanocomposites for biomedical applications
- Deformation mechanisms and differential work hardening behavior of AZ31 magnesium alloy during biaxial deformation
- Kink-band formation in directionally solidifies Mg/Mg2Yb and Mg/Mg2Ca eutectic alloys with Mg/Laves-phase lamellar microstructure
- Effects of heat treatment on mechanical properties of an extruded Mg-4.3Gd-3.2Y-1.2Zn-0.5Zr alloy and establishment of its Hall-Petch relation
- Influence of ZrO2/SiO2 nanomaterial incorporation on the properties of PEO layers on Mg-Mn-Ce alloy
- Corrosion behavior of a Mg-Zn-Ca-La alloy in 3.5 wt% NaCl solution
- Effect of heat treatment on the mechanical and biocorrosion behaviour of two Mg-Zn-Ca alloys
- Experimental and quantum chemical studies of carboxylates as corrosion inhibitors for AM50 alloy in pH neutral NaCl solution
- An improved yield criterion characterizing the anisotropic and tension-compression asymmetric behavior of magnesium alloy
- Activation of non-basal ＜c+ a＞slip in multicomponent Mg alloys